E2000

E2000

tuned propulsion system

The E2000 is DJI’s first tuned propulsion system specially engineered for industrial applications and aerial imagery. Using a combination of 6010 motors, 1240S/X ESCs, and 2170 propellers, the E2000 is designed to carry payloads of 1800–2500g per axis, giving it the power to carry substantial add-ons and advanced imaging equipment.

The E2000 is available in Standard and Pro versions. These two versions feature the same core design and inner components, but different structural design to meet the demands of different groups of users.

E2000 Standard

Comprising of three separate units for the ESC, motor and propellers, E2000 Standard offers a wide range of platform compatibility and platform customization. The separate 1240S ESC also allows this system to be additionally water resistant.

Motor

6010 Standard

ESC

1240S

Propeller

2170

E2000

E2000 Pro

Featuring complete installation of the ESC, motor and propeller the E2000 Pro is easy to install, adding power and reliability to any aircraft with 28mm-diameter arm tubes quickly.

Motor

6010 Pro

ESC

1240X

Propeller

2170

E2000

E2000

All-weather capability

The materials and finishing used to build the E2000 gives the system unprecedented robustness that is necessary for industrial use and reliability even in rough weather.*

E2000

The 6010 Standard and Pro motor bearings are fully sealed to prevent fluids like rain, pesticide, and salt spray from entering and causing corrosion. A special surface coating applied to the stator also greatly improves its ability to withstand rusting.

The same effective weather sealing has also been applied to the external 1240S ESC found with the E2000 Standard.

*The E2000 Standard has an IP56 rating.

INDUSTRIAL GRADE

IP56*

DUST-PROOF*

WATERPROOF*

*E2000 Standard Only

E2000

Integrated cooling for maximum reliability

To more effectively dissipate heat generated under intensive industrial use, the 6010 Standard and Pro motors feature integrated centrifugal cooling systems that effectively cools the motor while keeping dust and micro particles out. Both types of ESC additionally include silica thermal pads and heat sinks for maximum heat transfer and dissipation. As a result, the system components’ lifespan is maximized and risk of failure under heavy loads and high temperatures is minimized.

E2000

Increased payload, extended flight time

The E2000 is designed for payloads of 1800–2500g/rotor, with a maximum thrust of up to 5100 g/rotor (50V, sea level). This enables the platform to carry heavy payloads while ensuring sufficient power to fly through heavy winds, and improved maneuverability.

The 21-inch propeller is made of Ultra Carbon Pro, an advanced composite material, for lower rotational inertia in combination with high strength and stiffness. Their aerodynamic profile combined with optimized electro-magnetic design of the motor make the E2000 extremely energy efficient.

1800g~2500 g/AXIS

TAKE-OFF WEIGHT

5100 g/AXIS

MAXTHRUST

E2000
E2000

Sine-wave driven ESC

The 1240S ESC is based on a sine-wave drive architecture and advanced, patented algorithms that help the motor respond quickly and precisely to the pilot’s controls. Users can assign the color of the internal LED*, which indicates the real-time status of the propulsion system while working. The included duplex communication port also makes the ESC's firmware easily upgradeable.*

*These functions require a separately sold updating tool, and is configured through the DJI ESC Assistant. Please refer to the E2000 user manual for more information.

E2000

SINUSOIDAL DRIVE ARCHITECTURE

E2000

For customized solutions for industrial use, please contact 
info.industry@dji.com

Buy E2000 

TUNED PROPULSION SYSTEM