DJI WORKSHOP: Moving with cameras ™ >


Funciones Integradas
  1. Tres Modos de Operación
    • Modo Suspendido
    • Modo Vertical
    • Modo Maleta
  2. Módulo IMU integrado e independiente
  3. Estabilizador DJI Especializado accionado con motores codificados
  4. Módulo Bluetooth
  5. Conexión USB
  6. Receptor de 2,4 GHz
  7. Sensor de Temperatura
  8. Procesador DSP de 32-Bit DJI Advanced
  9. Compatible con Receptor D-Bus

Características Mecánicas y Eléctricas

Corriente de Funcionamiento•Corriente Estática: 300mA (@16V)
• Corriente Dinámica: 600mA (@16V)
• Corriente de Arranque: Max 10A (@16V)
Temperatura de Funcionamiento-15° C ~ 50° C (5° F ~ 120° F)
Peso4.20kg (9.26lbs) totalmente cargado con manillar
Dimensiones del Estabilizador620mm(A) x 280-380mm (P)x 500mm(A)
Dimensiones del soporte de la cámaraLa Profundidad Máxima, desde el centro de masa en la base de placa de la Cámara: 140 mm
La Altura Máxima Medida desde la parte superior de la base de la placa de la Cámara: 225 mm
Ancho Máximo: 195 mm


Conexiones de Alimentación de Accesorios12V P-Tap Regulado x 2, USB 500mW x 1, DJI Lightbridge x 1
Entrada de Alimentación GCUBatería 4S Ronin
ConexionesControl Remoto 2.4 GHz, Bluetooth 4.0, USB 2.0
Requerimientos del Software Assistant PCWindows XP SP3; Windows 7; Windows 8 (32 o 64 bit)
Requerimientos del Software Mobile AssistantiOS version 6.1 osuperior. Dispositivo Móvil iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5 , iPad 3, iPad 4, iPad mini


Peso de Carga (Valor de Referencia)7.25kg (16lbs)
Rango Angular de Vibración± 0.02°
Velocidad Máxima de Rotación ControladaEje Vertical: 90°/seg
Eje Horizontal: 100°/seg
Eje de Rotación: 30°/seg
Rango de Tope Mecánico•Control en el eje Vertical: 360°
• Control en el eje Horizontal: de +45° a -120°
• Control en el eje de Rotación: ± 25°
DJI - Installing and Tuning your DJI Ronin Thumb Controller
DJI - Installing and Tuning your DJI Ronin Thumb Controller
Ronin DJI Assistant App Overview  
Ronin DJI Assistant App Overview  
No Compromises – The Making of the DJI Ronin 
No Compromises – The Making of the DJI Ronin 
DJI - Preparing and Balancing Your Ronin
DJI - Preparing and Balancing Your Ronin

Documents & Manuals

  • Ronin Release Notes
  • Ronin User Manual (EN) v2.0
  • Ronin User Manual (JP) v1.8

Software & Drivers

    iOS Version v1.1.28
    Android version v1.1.0
    * Scan QR code to download the app. Mobile Assistant Software Requirements: iOS version 7.0 or above/ Android system version 4.3 or above with bluetooth 4.0 support.

  • Ronin Assistant Software v2.4
  • Ronin Firmware IMU v3.1
  • Ronin Firmware GCU v1.3
  • Ronin Assistant Software v1.8
  • Ronin Firmware IMU v3.0
  • Ronin Firmware GCU v1.0
  • Ronin Assistant Software v1.4
  • Ronin Firmware IMU v2.3
  • Ronin Firmware GCU v0.12
  • DJI WIN Driver Installer
  • Ronin Assistant Software v2.4
  • Ronin Firmware IMU v3.1
  • Ronin Firmware GCU v1.3
  • Ronin Assistant Software v1.4
  • Ronin Firmware IMU v2.3
  • Ronin Firmware GCU v0.12
  • * Important Note:
    As DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI parts or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.
Developed for the filmmaking professional, the Ronin is a 3-axis stabilization gimbal that can hold a wide variety of cameras, giving you smooth, stable, hand-held footage in most conditions.
SmoothTrack gives a single gimbal operator the ability to transform their tilt and pan movements on the gimbal into smooth and stabilized camera angle changes. This makes framing wide-angle or close scenes significantly easier for a single operator.
It weighs 4.20kg (9.26lbs), including the handlebar and battery.
The Ronin is made out of aluminum alloy. This means that compared to other handheld gimbals, it has a greater load capacity and has greater structural stability.

The maximum load weight of the Ronin is 7.25kg (16lbs).
The handlebar is made of carbon fiber and the main body of the gimbal is made of aluminum alloy.

It currently supports cameras with a maximum depth of 140 mm (measured from the CG), a maximum height of 225 mm, and a maximum width of 195mm. The maximum load weight is 7.25kg (16lbs). Cameras such as the BMPCC, BMCC, Canon 1Dc, Canon 5D MK II, Canon 5D MK III, Canon 6D, Canon 7D, Canon C100, Canon C300, Canon C500, Nikon D800, Panasonic GH3/GH4, Red Epic/Scarlet, Sony Nex7, among others, can be used.

No. No tools are needed to balance the camera. Changing the setup for different camera arrangements is quick and simple.
Yes, the Ronin comes with an extremely strong, durable, water-tight carrying case with rolling wheels, and extensible handle for easy transportation.
Yes, the Ronin ships with a 2nd operator transmitter, this allows a 2nd operator to pan, tilt, and roll the camera independent of the Ronin’s movement. The 2nd operator transmitter also allows for mode and speed selection.
Yes, it comes with a tuning stand for suspending or storing the Ronin. The upper half of this tuning stand can be removed by loosening the knob at the top, so you can use it with any C-stand. When using a C-stand, be sure to check the balance of the stand so the Ronin doesn’t tip over. When setting the stand on a table, ensure the table is flat and even.
With the 3400mA 4S smart battery fully charged, the Ronin can run for over 4 hours, depending on the attached camera rig and gimbal usage.
The Ronin includes only one battery, but there are three positions reserved for storing extra batteries.
No, the Ronin battery is a 4S and those for the Phantom 2 series are 3S.
No, please use the Ronin battery charger.
The control range is around 100-200m when using the included remote control and built-in DJI receiver. A D-bus port is also included if a non-DJI receiver is required.
No, assembling the Ronin is very easy, as only the top handle bar, which features a quick release button, must be attached before use.
The DJI Assistant app allows easy configuration of all system parameters on the fly via Bluetooth.
Search “DJI Assistant” on App Store to download the iOS version. An Android app will be available soon.
The Phantom 2 remote control is compatible, while the Phantom 2 Vision and Vision+ remote controls are not. The Ronin uses a 2.4Ghz remote control. You can pair it with other 2.4Ghz remote controls such as a Futaba transmitter or use a third party S-BUS/PPM remote control or receiver.
No. The system battery, motors, and other electronic equipment are not waterproof.
Yes. The top bar features a quick release system allowing easy attachment and detachment. The same attachment can be used for mounting the Ronin to a vehicle, crane or multi-rotor.
Yes. The Ronin supports 2.4Ghz remote controls and has a D-Bus port if you wish to use a non-DJI receiver.
With a little practice, the Ronin takes less than 5 minutes to set up and balance whenever the camera configuration is changed. It is very easy to operate once setup.
All units have the latest firmware when shipped, and firmware updates will be made available online for improved performance and future features. Download the updates and use a standard USB cable to update the Ronin’s firmware through the PC Assistant.
A connection port for the DJI Lightbridge is provided on the power distribution box.

There are three different modes of operation. These allow the Ronin to be used in different scenarios. They are Upright mode, Underslung mode, and Briefcase mode.
The default operation mode is Underslung mode.
To switch to Upright mode from Underslung mode, turn the Ronin so the front faces toward you. Flip the gimbal over to bring the camera closer to eye level for a higher perspective.
To switch to Briefcase mode from Underslung mode, turn the handlebar 90 degrees from the gimbal, then swing the handlebar downward until the mode automatically changes. Briefcase mode must be activated in the Assistant app.

The Mode switch is used for switching between SmoothTrack mode positions 1, 2, and 3. The Function switch is used to select the SmoothTrack speed. There are 3 possible selections: fast, normal and slow. The value of each speed can be preset in the App or PC Assistant. Also, quickly toggling the Function switch between Position 1 and Position 3 three times will activate the motor kill switch. Do the same again to turn off the motor kill switch.
In SmoothTrack mode, the Ronin will automatically point the camera where you want it to go. A single thumb control will be made available for the Ronin for greater control.
A built-in balance adjustment system means no tools are needed for setup and balance. Changing the setup for different camera arrangements is quick and simple. An allen wrench is included that is used to fasten or loosen the camera mounting plate, or tighten down adjustment knobs.
Follow focus systems and matte boxes can be easily mounted on the Ronin by using industry standard dual 15mm segmented rods. The segmented rods may be customized to different lengths, depending on your camera and lens setup. Two regulated 12V P-taps and one 500mAH full size USB connector offer a convenient power source for various accessories, including follow focus systems, HD video downlinks, and others.
An accessory will be made available in the future for the use of larger cameras.
You can charge and discharge the battery about 200-300 times.
Approximately one hour.
Two regulated 12V P-taps, one 500mAH full size USB connector, and one DJI Lightbridge HD Video Downlink port offer a convenient power source for other equipment, all while keeping the wiring to a minimum. The system cannot provide power for additional cameras.
The standard Ronin has a limited 1 year warranty, but this may vary depending on your country. For more details, please go to
The flying platform must have enough payload capacity and stability to carry the full weight of the Ronin plus your accessories. Please note that unlike the Zenmuse series of gimbals, the Ronin does not have rubber dampers.
Install the top handle bar, install the battery, mount the camera, adjust the balance, and tap the Auto Tune Stability button, then it is ready to use. Further setup and customization may be done via the Dji Assistant mobile app.

Estabilización de imagen sin igual en tus manos