General Features

header
  • Lightweight, multi-functional integrated aircraft and camera
  • Camera remote-control by DJI VISION APP
  • Range Extender increases Wi-Fi distance to 300m
  • Anti-vibration camera platform with single axis stabilisation
  • Low-voltage protection
  • Virtual Radar aircraft locator on mobile device
  • Range of camera tilt options
  • Multiple, continuous and timed capture options
  • HD Video Recording (1080/p30 or 1080/60i)
  • RAW and JPEG picture formats

Transmitter

Operating Frequency5.728GHz-5.8GHz
Communication Distance (open area)CE: 300m; FCC: 500m
Receiver Sensitivity (1%PER)-93dBm
Transmitter PowerCE: 25mw; FCC: 125mw
Working Voltage80 mA@6V
Battery4 AA Batteries

Range Extender

Operating Frequency2412-2462MHz
Communication Distance (open area)300m
Transmitter Power<=17dBm
Power Consumption1.5W

Aircraft

Battery5200mAh LiPo
Weight (Battery & Propellers included)1160g
Hover Accuracy (Ready to Fly)Vertical: 0.8m; Horizontal: 2.5m
Max Yaw Angular Velocity200°/s
Max Tilt Angle35°
Max Ascent / Descent SpeedAscent: 6m/s; Descent: 2m/s
Max Flight Speed15m/s (Not Recommended)
Diagonal Length350mm
Tilting Range of Gimbal0°-60°

Camera

Resolution14 Megapixels
FOV120°/ 110°/ 85°
Sensor size1/2.3"
Functionality
  • Support of multi-capture, continuous capture and timed capture
  • Support of HD Recording (1080/p30 or 1080/60i)
  • Supports of both RAW and JPEG picture format

DJI VISION App

System Requirement Of Mobile DeviceiOS version 6.1 or above/ Android system version 4.0 or above
Mobile Device Support
  • iOS recommended: iPhone 4s, iPhone 5, iPhone 5s, iPhone 6, iPhone 6 Plus, iPod touch 5 (available but not recommended: iPad 3, iPad 4, iPad mini)
  • Android recommended: Samsung Galaxy S3, S4, Note 2, Note 3 or phones of similar configuration
DJI - Introduces Phantom 2 Vision & Vision+ Ground Station
DJI - Introduces Phantom 2 Vision & Vision+ Ground Station
2014-06-24
Phantom 2 Vision - Preparing to Fly
Phantom 2 Vision - Preparing to Fly
2014-03-19
Phantom 2 Vision – Camera Firmware Upgrade
Phantom 2 Vision – Camera Firmware Upgrade
2014-01-24

Documents & Manuals

  • Phantom 2 Vision Release Notes
    2015-04-27
  • Phantom 2 Vision User Manual (EN) v1.8
    2015-01-30
  • Phantom 2 Vision User Manual (FR) v1.08
    2014-02-18
  • Phantom 2 Vision User Manual (DE) v1.08
    2014-02-18
  • Phantom 2 Vision Quick Start Guide (EN) v1.0
    2013-10-30
  • Phantom 2 Vision Quick Start Guide (DE) v1.0
    2013-10-30
  • Smart Flight Battery Safety Guidelines(EN, FR, DE and JP)
    2014-10-15
  • Phantom 2 Vision Pilot Training Guide v1.0
    2013-11-16

Software & Drivers

  • Phantom 2 Vision Assistant Software v3.8
    2015-01-30
  • @Phantom 2 Vision Main Controller Firmware* v3.14
    2015-04-27
  • @Phantom 2 Vision Central Board Firmware* v1.0.2.10
    2014-11-28
  • Phantom 2 Vision Assistant Software v3.6
    2014-10-31
  • @Phantom 2 Vision Main Controller Firmware* v3.08
    2014-10-28
  • @Phantom 2 Vision Central Board Firmware* v1.0.2.10
    2014-11-28
  • Phantom RC Assistant Software v1.2
    2014-12-03
  • Phantom 2 Vision FC200 Firmware v1.1.9
    2014-01-20
  • DJI WIN Driver Installer
    2013-01-18
  • Phantom 2 Vision+ Assistant Software v3.8
    2015-01-30
  • @Phantom 2 Vision Main Controller Firmware* v3.14
    2015-04-27
  • @Phantom 2 Vision+ Central Board Firmware* v1.0.2.10
    2014-11-28
  • Phantom 2 Vision Assistant Software v3.6
    2014-10-31
  • @Phantom 2 Vision Main Controller Firmware* v3.08
    2014-10-28
  • @Phantom 2 Vision+ Central Board Firmware* v1.0.2.10
    2014-11-28
  • Phantom RC Assistant Software v1.2
    2014-12-19

DJI Vision App

    * Mobile Device Support: iPhone 4s, iPhone 5, iPhone 5s, iPhone 6, iPhone 6 Plus, iPod touch 5 (available but not recommended: iPad 3, iPad 4, iPad mini). Samsung Galaxy S3, S4, Note 2, Note 3 or Android phones of similar configuration.

Latest Version Information

    Items Version Date
    DJI FC200 Camera V1.1.9 2014-01-20
    5.8GHz Remote Controller V1.0.2.30 2014-11-04
    5.8GHz Receiver V1.0.1.3 2013-11-05
    iOS App V1.0.48 2015-02-06
    Android App V1.0.58 2015-02-13
    Phantom 2 Vision Autopilot System V3.14 2015-04-27
    Phantom 2 Vision Central Board V1.0.2.10 2014-11-28
    PC Assistant Software V3.8 2015-01-30
    Mac Assistant Software V3.8 2015-01-30
  • * Disclaimer of Warranties:

    SZ DJI Technology Co. Ltd. provides the firmware “as is” and “as available” for your use, without warranty of any kind, either express or implied, including all implied warranties of merchantability, and fitness for a particular purpose. You expressly agree that your use of, or inability to use the firmware is at your sole risk. In no case shall SZ DJI Technology Co. Ltd. be liable for any direct, indirect, punitive, special, or consequential damages arising from your use of any of the firmware, including but not limited to, any loss or damage of any kind incurred as a result of your misuse, transmitted, etc.
Ground Station
Vision Ground Station is built into the latest version of the Vision app (iOS: Version 1.0.41, Android 1.0.50). Simply update the app, open it and go to “Settings” to enable Ground Station. Accept the terms and conditions then return to “Camera” mode and swipe left to begin Ground Station flight planning.

None. Everything needed for Vision Ground Station flight is built in to the Phantom 2 Vision and Vision+.
Just ensure that you are running the latest firmware (v3.04). Visit http://www.dji.com/product/phantom-2-vision/download to download the latest firmware and installation instructions.

Remember that launching from the ground, your Phantom will fly in a straight line to your first waypoint. Make sure you have enough clearance to travel up to the altitude desired for your flight plan.

16 waypoints
200-meter height limit
5000-meter max flight distance
3 speedsFast 8m/s, Mid 4m/s, Slow 2m/s

Altitude is from ground, not from sea level. Make sure your preset flight is high enough to avoid obstacles Use Ground Station in open spaces to ensure a strong GPS signal and avoid planning flight paths near power lines.
Quickly flip the S1 switch down and then back to GPS mode.

This could be caused by one of three things
1. You may be within an airport no-fly zone (within 8Km of major airports) or you may have no GPS lock. Move out of the no-fly zone to begin.
2. You have no GPS lock. Wait until your Phantom has full GPS lock i.e. 6 satellites or more.
3. You have not cached a map. Connect to the internet and download the map for your area.

The Vision Waypoints system is not available for the Phantom 2, however the more complex Ground Station app for the Phantom 2 is. All that is required is the installation of a DJI 2.4G Bluetooth datalink: http://www.dji.com/product/2-4g-bluetooth-datalink
The Vision waypoints system is not compatible with the Phantom 1 or FC40
The Vision waypoints system is not compatible with the Naza or the Naza-M, however the Naza-M can be used with iPad ground station.
An Internet connection is required to download the map. If flying in an area without internet access, you can cache the map by viewing it when an internet connection is available.
No. The map and the camera are on different pages.
These are airport safety zones. Waypoint flight is not permitted within this area.
Point of Interest is not supported on the Vision waypoints system at this time.
Maps will be downloaded automatically through Google Maps when you view the waypoints page, as long as you have an internet connection.
The Phantom does not follow, however you can get a similar effect by programming the Phantom to fly your path, then setting an appropriate flight speed.
The Phantom will continue on its mission.
The Phantom will continue on its mission.
The Phantom will continue to hover for 1 minute then return to home.
This is caused by a mismatch in firmware. Please make sure your firmware is as follows: App version 1.0.41, camera 1.1.9 and Naza-M 3.04