Ace Waypoint Autopilot System

Size and Weight

spec

Basic Performance

Supported Helicopter
Electric and fuel powered
Supported Swashplate
Normal
Three Servo 120° / 140° / 90°
Four Servo 90°
(All the types are fine tuning supported)
Supported Servo Output *
500Hz (760us) / 200Hz (1520us)
for Rudder Channel;
Others depend on your receiver output.
Recommended Transmitter
1 — PCM or 2.4GHz
2 — Minimum 7 channels
3 — Failsafe function available on all channels
Recommended Power Supply
DC 4.8~8.4V
(Not be exceed MAX operating voltage of servo motor) More than 4000 mAH capacity Discharge current more than 5C No separate servo power supply required
Operating Temp
-20°C to +70°C
Power Consumption
MAX 5W
(0.9A@5V, 0.7A@5.8V, 0.5A@7.4V, 0.4A@8V)
Built-In Memory
4GB Flash Memory for flight information recording
Assistant Software System Requirement
Windows XP / Windows Vista / Windows 7 / Windows 8

Flight Performance

Hovering Accuracy
Vertical : ± 0.5m
Horizontal : ± 1m
Suitable Wind Condition
< 8 m/s (17.7mph)
Forward / BackwardLeft / Right
± 72 km/h (44.74 mph)
± 56.7 km/h (35.77 mph)
Acceleration Ascent / Descent
Adjustable via ACE ONE ASSISTANT software,can be limited by user precisely

Hardware

Weight
<= 150g (The devices on helicopter)
Dimensions
Main Controller : 61 mm x 39.6 mm x 15.8 mm
IMU : 40 mm x 31 mm x 26 mm
GPS & Compass : 50 mm (diameter) x 9 mm
Built-In Functions
Autopilot / Tail Gyro / Flybar-less / Engine Speed Control / Gimbal Stabilization / Fail-safe Go-Home
Packaging List
Main Controller × 1
IMU × 1
GPS & Compass Module × 1
Micro USB Cable × 1
3-PIN Servo Cable × 10
Quick Start Manual ×

* Recommended tail servos for Ace One:

Futaba BLS251 Brushless Digital Tail Servo FUTM0521 Torque @ 4.8V: 53 oz-in (3.8 kg-cm) Speed @ 4.8V: 0.06 sec
S9256 Heli High-Speed for GY601/GY611 Gyro 47 oz-in (3.4 kg/cm) 0.06 sec/60°
Outrage BL 9188 High Voltage Brushless Digital Tail Servo 6.0v. 0.045/sec 7.4v 0.037/sec 8.4v 0.034/sec
Outrage BL 9088 6.0v. 0.05/sec 7.4v 0.04/sec 8.4v 0.03/sec
JR DS8900G Digital Tail Servo 0.05secs/60°
JR MP80G Brushless Digital Servo 0.05secs/60°
Align DS650 0.058 sec/60° (4.8V), 0.048sec/60° (6.0V)

Notice: Flight Performance can be effected by mechanical performance and payloads