vr list
click and drag


vr list
click and drag


The Phantom 2 is unbelievably easy to fly. Combined with smooth, stabilized footage from the H3-2D, H3-3D or H4-3D gimbal, aerial cinematography and videography has never been easier. It’s light, rugged and perfect for travel.

Requires Zenmuse H3-2D, H3-3D or H4-3D, video downlink and monitor.

Real flight at your fingertips

See what the camera sees and lose yourself in picture quality so good it will feel like you’re in the sky yourself.

Requires DJI Lightbridge, iOSD mini or iOSD MK II, video downlink and monitor.

DJI Lightbridge solution

The DJI Lightbridge 2.4G full HD digital video downlink features a native OSD system that needs no additional equipment, for an all-in-one FPV experience. Once connected, you can control your flight controller through its built-in 2.4G remote control link or DJI 5.8G remote control.

DJI iOSD solution

Install an iOSD MK II or iOSD mini to see real-time flight data.

Unbelievable intelligence

Program your flight path from an iPad with the 16 waypoint Ground Station system, to shoot with more precision than ever. (Requires DJI 2.4G Bluetooth(R) Datalink.)


All-in-One New Design

Self-tightening Propeller
Self-tightening propellers are easy to install and tighten during flight to improve safety.
All propellers are dynamically balanced to eliminate unwanted vibrations.
Micro USB Port
Connect to a computer for firmware upgrades and parameter tuning.
CAN-Bus Expansion Module
Make the Phantom 2 more powerful with the CAN-bus module.
Add an iOSD or even a 2.4G Bluetooth Datalink.

Intelligent, Long Lasting Battery

The high capacity, high performance 5200mAh Lithium Polymer battery offers up to 25 minutes of flight time. It provides battery capacity data, over charge/discharge protection, as well as maintenance reminders making the battery extremely safe and reliable.

Flight Time
25 Mins
25% – 50% – 75% – 100% Battery Capacity

Greater Control

The upgraded remote control comes with many new features. A gimbal control dial, trainer port, built-in rechargeable LiPo battery with a capacity of 2000mAh, battery level LED indicators and throttle locking feature that holds the throttle stick in place when descending are all included. The new remote control is compatible with the Phantom 2 Vision+ and Phantom 2.

Use DJI Lightbridge to control your aircraft or connect the remote control to your computer via the trainer port to run a simulation application and practice your flying skills.
Gimbal Control
Battery Life
Trainer Port

Improved Power

New motors, propellers, and ESCs combine to give you greater thrust and control than ever before. You can load more equipment on your Phantom, and achieve up to 200g/arm of extra thrust when using a 3S LiPo battery with this completely new system.

New Compass

A new, anti-static compass has been
developed, with a protective shell to help
shield it in any flight conditions.

vr list
click and drag

Easy Battery

Integrated battery compartment allows battery
changes in a matter of seconds.


Precision Flight and Stable Hovering

An integrated GPS auto-pilot system that offers position holding, altitude lock and stable hovering allows you to focus attention to be focused on shooting.

Auto Return-to-Home /One-key Go-Home

If the Phantom 2 and its controller are disconnected during flight, the system’s failsafe protection will activate, automatically telling and if the signal is good enough, the Phantom 2 to return home and land automatically.

You can also setup a One Key Go Home function to activate this feature manually.

Out of Range
Return to Home
Home Point
Control Range

No fly zones feature

In order to increase flight safety and prevent accidental flights in restricted areas, the new firmware for the Phantom 2 series includes a No Fly Zone feature.

These zones have been divided into two categories: A and B. For a full explanation of the difference between the categories and to view a complete list of places included, please click here.