E2000 Pro


E2000 Pro

The E1200 is a fine-tuned propulsion system designed for multi-rotor copters weighing 7-15 kg. Extensive optimization
provides efficiency, safety, and endurance under extreme conditions. This system can be used to upgrade platforms with 25mm-diameter arm tube, such as S900.

The Pro version adopts an integrated structure and a total solution for heat dissipation design. The 17-inch carbon propeller,
together with 4216 motor and sine-wave drive ESCs with real time diagnostics, unlock vastly greater possibilities for professional aerial photographers.

Break limits and let your inspiration soar.

Integrated Structure

For ultimate convenience, the E1200 Pro’s integrated ESC,
motor, and propeller are designed as a single unit that can
be installed quickly and easily on the arm
of any compatible platform. It also enables
a total solution for heat dissipation.

E2000 Pro
E2000 Pro

17-Inch Ultra-Carbon Folding Propeller

As one of the largest members of the Z-blade series, the 17-inch propeller boosts both
efficiency and thrust. The application of advanced ultra-carbon-fiber composite, provides the
rigidity of a metal propeller with lower inertial momentum. The classic folding design protects
the propellers while making transportation and use as simple and efficient as ever.

E2000 Pro
E2000 Pro
E2000 Pro

Motor & ESC Cooling System

A built-in centrifugal fan provides active cooling for both the ESC and the motor. Grid-shaped structure in the top allows for adequate ventilation while keeping dust and other debris out. The dissipation area of the integrated base plate has been enlarged by 200-300%, effectively enhances passive cooling of the system.

E2000 Pro
E2000 Pro

Next Generation Smart ESC

The sine-wave drive ESC increases power efficiency by capturing energy that is produced during deceleration. Active braking provides better dynamic response.

Breaking Limits

When using the E1200 Pro to upgrade your S900 using a standard 6S battery, flight endurance can be extended by nearly 30% *, assuming a consistent takeoff weight. With greater thrust, the maximum take-off weight can be increased by 1.8kg*.
Moreover, the E1200 Pro is capable of working in environmental temperature up to 60˚C and is capable of taking-off at altitudes 2000m higher than previous generations.

*Flight endurance and take-off weights are compared to S900 4114 motors with 15 inch blades. Your results may vary depending on environmental conditions and other factors.

  • Endurance extended by nearly 30%
  • Max take-off weight increased by 1.8kg
  • Environmental temperature up to 60˚C
  • Altitude limit increased by 2000m
E2000 Pro
E2000 Pro


Each smart ESC can receive real-time diagnostic data from the motor and visually communicate its status via high-visibility LEDs. This provides the user with a timely warning in the event of abnormal motor function.

Spark-proof circuitry offers enhanced safety and protection when plugging in or unplugging the power source.

E2000 Pro

Supports ESC Firmware Upgrades

The E1200 features a duplex communication port, which allows you to easily and independently upgrade the ESC firmware.

Notice: Updater accessories for the DJI Smart ESC sold separately.

The E1200 Pro and E1200 Standard share the same core design and inner components

E1200 Pro
Tuned Propulsion System

Integrated structure, complete with 25mm-diameter arm tube for greater convenience.

E1200 Standard
Tuned Propulsion System

Separated structure, offering a wider range of platform compatibility.

E2000 Pro

E2000 Pro

Buy E1200 Pro 

Take off with the finest motors, propellers and more.