Mission-Critical Flight Simplified

GS Pro (also known as Ground Station Pro) is an iPad app designed to control or plan automatic flights for DJI aircraft. Through its clear, concise interface, complex flight missions can be planned with a few taps. GS Pro will then automatically take pictures at pre-set waypoints, providing the accuracy required for precision mapping. A Virtual Fence feature increases safety and ease of use by locking the aircraft’s height and speed within a designated area. With these features, GS Pro dramatically increases the efficiency of various industrial applications, including but not limited to, aerial imaging, architecture, precision agriculture, electrical inspections, search and rescue, safety control, and more.

DJI GS Pro

DJI-Introducing GS Pro

3D Map Area

GS Pro automatically generates efficient flight paths after the user has set their required flight zone and camera parameters.The aircraft will then follow this route throughout its mission. The image data captured during these flights can be inputinto 3D reconstruction software to generate 3D maps, while the mission itself can be saved for re-use.

Draw a custom polygonal flight zone on-screen or fly around the zone to mark zone boundaries using the aircraft’s GPS coordinates.

Speed
10.5m/s
Altitude
50.0M
Resolution
2.2CM/PX

Adjust parameters including photo overlap ratio, altitude, shooting angle — parallel or vertical to the main flight path — course angle, and margin.Capture images at equal time intervals, equal distance intervals, or to hover at a waypoint during capture.

Inside ModeScan Mode

Two Flight Course Modes are available: Inside Mode, in which the aircraft follows an automatically generated routed within the chosen area,and Scan Mode which provides the fastest route to cover a designated area.

  • Front Overlap Ratio
    90%
  • Side Overlap Ratio
    60%
  • Course Angle
    90 °
  • Margin
    0.0M

To achieve better 3D reconstruction, the default photo overlap is optimized for a range of supported cameras.It can also be independently adjusted.

  • Custom Flight Zones
  • Adjust Parameters
  • Inside Mode and Scan Mode
  • Flight Plan Overlap Ratio

3D Map POIIN-APP PURCHASE

Generate detailed maps of tall structures using 3D Map POI. Simply choose the subject and set a distance between it and the aircraft. GS Pro will then provide relevant parameters including speed and time required to circuit the structure. Images captured can be exported into 3D reconstruction software to create accurate 3D models of the entire building.

Learn more

IMPORT KML/SHP FilesIN-APP PURCHASE

Increase your construction mapping efficiency by importing KML/SHP files into GS Pro. KML/SHP files, which contain important geographic information, can be imported into GS Pro via a PC or Mac wirelessly, or directly from within an iPad. After the geometries have been successfully imported, users can swipe left on the geometry list in the Map Panel, and GS Pro will automatically generate a flight mission according to the geometry field, helping users to conduct mapping with accuracy and ease.Mapping with GS Pro becomes even more flexible by adjusting waypoints. If GS Pro fails to generate a geometry similar to the target building or sets a flight route that’s not able to deliver a good result, users can still manually adjust the waypoints by dragging or add new ones to meet their needs.

Learn more

Tap and Go Waypoint Flight

Set a waypoint flight path, define waypoint actions, then start flying with a tap.

Up to 99 waypoints are available, depending on the needs of each flight.

  • Altitude
    50.0M
  • Aircraft Heading
  • Aircraft Rotation Direction
    ClockwiseCounterclockwise
  • Gimbal Pitch Angle

The altitude, speed, gimbal pitch and aircraft rotation (clockwise or counterclockwise)at each waypoint can be pre-defined.

Aircraft RotationGimbal PitchStart Recording
Stop RecordingPhoto CaptureHover

Each waypoint can have up to 15 consecutive actions, including aircraft rotation, gimbal pitch,start/stop recording, photo capture, and hover.

  • Return to Home Altitude
    50.0M
  • Hover
  • Land

After the aircraft finishes its flight mission, it can be set to Return to Home, Hover, or Land.

  • Multiple Waypoints
  • Adjustable Parameters
  • Various Waypoint Actions
  • Set End-Mission Actions

Virtual Fence

Virtual fence defines a specific area of flight and is useful in scenarios where some areas of asite are no-fly zones or if flight should only happen within one area, such as during manual pesticide spraying or flight. It is also useful in pilot training situations. As the aircraft approaches the virtual fence, it will brake and hover to ensure it stays within the flight area.

The size and shape of the Virtual Fence is completely customizable. It can be created pre-flight, or fly around the zone to mark boundaries using the aircraft’s GPS coordinates.

Maximum Speed
10.5M/S
Maximum Altitude
50.0M

Set the maximum speed and altitude for the aircraft when flying inside Virtual Fences.

  • Set Virtual Fence Range
  • Speed and Altitude

Industrial Applications

DJI GS Pro is a powerful, convenient and easy to use tool. With just a few taps on an iPad, complex flight routes can be created, giving critical missions added accuracy and reliability. GS Pro is an indispensable tool that is capable of dramatically increasing efficiency in a wide range of industries.

  • Architecture
  • Precision Agriculture
  • Electrical Inspections
  • Aerial Imaging
  • Safety Control
  • Search and Rescue

Phantom Series

MATRICE SERIES

A3 / A3 Pro

N3

Inspire SERIEs

Zenmuse series

Compatible Products

GS Pro is compatible with the following DJI aerial platforms and flight controllers: Phantom 3 Standard/4K/Advanced/Professional, Phantom 4/Pro/Advanced, Inspire 1/Inspire 2Matrice 100/600/600 Pro/200, A3, N3Compatible cameras: Phantom 3 Standard/4K/Advanced/Professional, Phantom 4/Pro, and Zenmuse X3, X5, X5R, X4S, X5S, Z3, Z30, and XT.


download Ground station Pro