Support for DJI O4 Air Unit Series

Air Unit (camera module excluded): Approx. 5.1 g
Air Unit (camera module included): Approx. 13.3 g
Antenna: Approx. 0.75 g

^{The size and weight may be slightly different due to the configuration, manufacturing process, and measurement method.}

Transmission Module: 30×30×6 mm (L×W×H)
Camera Module: 20.5×14×20.5 mm (L×W×H)
Coaxial Cable: 50 mm
3-in-1 Cable: 50 mm
Antenna: 80 mm

5.170-5.250 GHz
5.725-5.850 GHz

^{Operating frequency allowed varies among countries and regions. Please refer to local laws and regulations for more information.}

5.1 GHz: <23 dBm (CE)
5.8 GHz:
<30 dBm (IC)
<14 dBm (CE)
<30 dBm (SRRC)

With DJI Goggles 3 and racing mode enabled:
With 1080p/100fps video transmission quality, the latency is as low as 20 ms.
With DJI Goggles N3 and racing mode enabled:
With 1080p/100fps video transmission quality, the latency is as low as 24 ms.
With DJI Goggles 2 or Goggles Integra:
With 1080p/100fps video transmission quality, the latency is as low as 35 ms.

^{Latency data refers to the minimum latency during the screen refresh of the goggles. Tested in an outdoor open environment without interference. The video transmission latency data varies with different devices.}

With DJI Goggles 3/DJI Goggles N3:
10 km (IC), 6 km (CE), 6 km (SRRC)

^{Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range under various standards. The actual maximum communication range during flight is limited by the flight endurance of the aircraft. Always pay attention to RTH reminders on the camera view during your flight.}

1080p@30/50/60/100fps

Max 60 MHz

1 antenna, 1T1R

Supports auto mode
Supports manual mode:
With DJI Goggles 3 or DJI Goggles N3:
60 MHz: 1 channel; 40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels
With DJI Goggles 2 or Goggles Integra:
40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels

IC/SRRC/CE:
60 MHz/40 MHz:
Channel 1: 5794.5 MHz
20 MHz/10 MHz:
Channel 1: 5768.5 MHz
Channel 2: 5789.5 MHz
Channel 3: 5814.5 MHz

1/2-inch CMOS Sensor

FOV: 159°
Format Equivalent: 16 mm
Aperture: f/2.8
Focus: 1 m to ∞

100-6400 (Auto)
100-12800 (Manual)

4K (4:3): 3840×2880@30/50/60fps
4K (16:9): 3840×2160@30/50/60fps
1080p (4:3): 1440×1080@30/50/60/100/120fps
1080p (16:9): 1920×1080@30/50/60/100/120fps

MP4

100 Mbps

Normal

Standard
Wide-Angle

RockSteady 3.0+
Stabilization function off (supports Gyroflow)

^{When RockSteady is enabled, the shooting angle only supports standard.}

3.7-13.2 V

-10° to 40° C

23GB

Not supported

Not supported

Betaflight 4.3.0 or later

DJI Goggles 3 + DJI FPV Remote Controller 3
DJI Goggles N3 + DJI FPV Remote Controller 3
DJI Goggles 2/Goggles Integra + DJI FPV Remote Controller 2

^{The flight control firmware needs to be configured to support the SBUS protocol in order to use the DJI FPV remote controller.}

Air Unit (camera module excluded): Approx. 5.1 g
Air Unit (camera module included): Approx. 8.2 g*
Antenna: Approx. 0.75 g

^{* The lens mount is not included. With the lens mount, the weight is 9.2 grams. The size and weight may be slightly different due to the configuration, manufacturing process, and measurement method.}

Transmission Module: 30×30× 6 mm (L×W×H)
Camera Module: 13.44×12.36×16.50 mm (L×W×H)
Coaxial Cable: 50 mm
3-in-1 Cable: 50 mm
Antenna: 80 mm

5.170-5.250 GHz
5.725-5.850 GHz

^{Operating frequency allowed varies among countries and regions. Please refer to local laws and regulations for more information.}

5.1 GHz: <23 dBm (CE)
5.8 GHz:
<30 dBm (FCC)
<14 dBm (CE)
< 30 dBm (SRRC)

With DJI Goggles 3 and pick racing mode:
With 1080p/100fps video transmission quality, the latency is as low as 20 ms.
With DJI Goggles N3 and pick racing mode:
With 1080p/100fps video transmission quality, the latency is as low as 24 ms.
With DJI Goggles 2 or Goggles Integra：
With 1080p/100fps video transmission quality, the video transmission latency is less than 35 ms.

^{Latency data represents the minimum latency during the screen refresh process of DJI Goggles.Tested in an outdoor open environment without interference. The video transmission latency data varies with different devices.}

With DJI Goggles 3/DJI Goggles N3:
10 km (FCC), 6 km (CE), 6 km (SRRC)

^{Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range under various standards . The actual maximum communication range during flight is limited by the flight endurance of the aircraft. Always pay attention to RTH reminders in the app during your flight.}

1080P@30/50/60/100fps

Max 60 MHz

1 antenna, 1T1R

Supports auto mode
Supports manual mode:
With DJI Goggles 3 or DJI Goggles N3:
60 MHz: 1 channel; 40 MHz: 1 channels; 20 MHz: 3 channels; 10 MHz: 3 channel
With DJI Goggles 2 or Goggles Integra：
40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels

FCC/SRRC/CE:
60MHz/40 MHz：
Channel 1: 5794.5 MHz
20 MHz/10 MHz:
Channel 1: 5768.5 MHz
Channel 2: 5789.5 MHz
Channel 3: 5814.5 MHz

1/2-inch CMOS Sensor

FOV: 117.6°
The equivalent focal length: 14 mm
Aperture: f/2.8
Focus: 0.6 m to ∞

100-6400 (Auto)
100-12800 (Manual)

4K (4:3): 3840×2880@30/50/60fps
4K (16:9): 3840×2160@30/50/60fps
1080p (4:3): 1440×1080@30/50/60/100/120fps
1080p (16:9): 1920×1080@30/50/60/100/120fps

MP4

100 Mbps

Normal Mode

Standard
Wide-Angle

RockSteady 3.0+
Stabilization function off (supports Gyroflow)

^{When RockSteady is enabled, the shooting angle only supports standard.}

3.7-13.2 V

-10° to 40° C

23GB

Not supported

Not supported

Betaflight 4.3.0 and higher versions

DJI Goggles 3 + DJI FPV Remote Controller 3
DJI Goggles N3 + DJI FPV Remote Controller 3
DJI Goggles 2/Goggles Integra + DJI FPV Remote Controller 2

^{The flight control firmware needs to be configured to support the SBUS protocol in order to use the DJI FPV remote controller.}