Online Customer Service
24-Hour Service
Need assistance? We’re here to help!
Specs
General
Dimensions (L×W×H)
70.5×44.2×32.8 mm
Weight
145 g
Waterproof
16 m [1] without Waterproof Case, 60 m with Waterproof Case
Number of Microphones
3
Touchscreens
Front Screen: 1.4-inch 326 ppi 320×320
Rear Screen: 2.25-inch 326 ppi 360×640
Front/Rear Screen Brightness: 750±50 cd/m²
Supported SD Cards
microSD (up to 256 GB)
Recommended microSD Cards
Recommended models:
SanDisk Extreme 32GB V30 A2 UHS-I Speed Grade 3
SanDisk Extreme Pro 32GB V30 A2 UHS-I Speed Grade 3
Kingston Canvas Go!Plus 64GB UHS-I Speed Grade 3
Kingston Canvas Go!Plus 128GB UHS-I Speed Grade 3
Kingston Canvas React Plus 64GB UHS-II Speed Grade 3
Kingston Canvas React Plus 128GB UHS-II Speed Grade 3
Kingston Canvas React Plus 256GB UHS-II Speed Grade 3
Camera
Sensor
1/1.7-inch CMOS
Lens
FOV: 155°
Aperture: f/2.8
Focus Range: 0.3 m to ∞
ISO Range
Photo: 100-12800
Video: 100-12800
Electronic Shutter Speed
Photo: 1/8000-30 s
Video: 1/8000 s to the limit of frames per second
Max Photo Resolution
4000×3000
Zoom
Digital Zoom
Photo: 4x
Video: 2x (> 60fps), 3x (≤ 60fps, HorizonSteady On), 4x (≤ 60fps, HorizonSteady Off)
Slow Motion/Timelapse: Not available
Still Photography Modes
Single: 12 MP
Countdown: Off/0.5/1/2/3/5/10 s
Standard Recording
4K (4:3): 4096×3072@24/25/30/48/50/60fps
4K (16:9): 3840×2160@100/120fps
4K (16:9): 3840×2160@24/25/30/48/50/60fps
2.7K (4:3): 2688×2016@24/25/30/48/50/60fps
2.7K (16:9): 2688×1512@100/120fps
2.7K (16:9): 2688×1512@24/25/30/48/50/60fps
1080p (16:9): 1920×1080@100/120/200/240fps
1080p (16:9): 1920×1080@24/25/30/48/50/60fps
Slow Motion
4K: 4x (120fps)
2.7K: 4x (120fps)
1080p: 8x (240fps), 4x (120fps)
Hyperlapse
4K/2.7K/1080p: Auto/×2/×5/×10/×15/×30
Timelapse
4K/2.7K/1080p@30fps
Intervals: 0.5/1/2/3/4/5/6/7/8/10/13/15/20/25/30/40 s
Duration: 5/10/20/30 mins, 1/2/3/5 hours, ∞
HDR Recording
4K (16:9): 3840×2160@24/25/30fps
2.7K (16:9): 2688×1512@24/25/30fps
1080p: 1920×1080@24/25/30fps
Stabilization
EIS [2]:
RockSteady 3.0
RockSteady+
HorizonBalancing
HorizonSteady
Max Video Bitrate
130 Mbps
Supported File System
exFAT
Photo Format
JPEG/RAW
Video Format
MP4 (H.264/HEVC)
Built-in Storage Capacity
The camera does not have built-in storage, but storage capacity can be expanded by inserting a microSD card.
Audio Output
48 kHz; AAC
Battery
Type
LiPo 1S
Capacity
1770 mAh
Energy
6.8 Wh
Voltage
3.85 V
Operating Temperature
-20° to 45° C (-4° to 113° F)
Charging Temperature
5° to 40° C (41° to 104° F)
Operating Time
160 mins [3]
Connection
Wi-Fi Operating Frequency
2.400-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
Wi-Fi Protocol
802.11 a/b/g/n/ac
Wi-Fi Transmission Power (EIRP)
2.4 GHz: < 16 dBm (FCC/CE/SRRC/MIC)
5.1 GHz: < 14 dBm (FCC/CE/SRRC/MIC)
5.8 GHz: < 14 dBm (FCC/CE/SRRC)
Bluetooth Operating Frequency
2.400-2.4835 GHz
Bluetooth Transmission Power (EIRP)
< 4 dBm
Bluetooth Protocol
BLE 5.0
Footnotes
1. Before use, close the battery compartment cover and the USB-C port cover, and tighten the Lens Protective Cover. It is recommended to install the Waterproof Case for long-duration underwater shooting or in environments with high water impacts or pressure. Osmo Action 3 and its Waterproof Case have an IP68 waterproof rating. Do not use the camera in hot springs or expose it to corrosive liquids.
2. EIS is not supported in Slow Motion and Timelapse modes. HorizonSteady is only available when the video resolution is 1080p (16:9) or 2.7K (16:9) with a frame rate of 60fps or below. HorizonBalancing is only available when the video resolution is 1080p (16:9), 2.7K (16:9), or 4K (16:9) with a frame rate of 60 fps or below.
3. Tested in a 25° C (77° F) laboratory environment while recording 1080p/30fps video in normal video mode with Enhanced Image Quality disabled, EIS disabled, and the screens off, and should be used for reference only.
Others
Guaranteed software updates until
2026/12/31
Tutorial Videos
FAQ
Camera
Does Osmo Action 3 support vertical shooting?
Slide down the screen to enter the Settings page, turn off "Orientation Lock", then rotate the camera clockwise or counterclockwise by 90°, and the camera can be used for vertical shooting.
It is recommended to use it with the Horizontal-Vertical Protective Frame.
It is recommended to use it with the Horizontal-Vertical Protective Frame.
About the Osmo Action 3 Color Temperature Sensor
The color temperature sensor is located at the letter “O” on the Action 3 nameplate. Do not cover the letter “O” when holding the camera. With the help of the color temperature sensor, Action 3 can obtain better color temperature performance in complex lighting scenarios. For example, when diving, it can correct the color temperature underwater, so the color temperature will not change when the camera angle changes. In addition, the sensor allows the camera to more accurately detect and reduce the stroboscopic effect in the shooting environment.
How many microphones does Osmo Action 3 have, and where are they located?
There are altogether 3 microphones on Action 3, with 2 at the nameplate and 1 on the right side of the camera bottom panel (with the front touchscreen facing toward the operator).
How do I charge Osmo Action 3? What are the requirements for the charger? Can I use a mobile phone charger to charge the camera?
Charging method 1: Charge the camera via the USB-C port. Action 3 supports PPS/PD fast charging protocol, and up to 23 W fast charge.
Charging method 2: Use the Osmo Action 3 Multifunctional Battery Case for battery charging, support PPS/PD fast charging protocol, and the battery supports up to 23W fast charging.
Note:
1. It is recommended to use the DJI 30W charger for charging.
2. Charge using a charger that supports PD/PPS fast charging protocol, and up to 23W fast charging is supported.
3. Common mobile phone adapter models that are currently known to be incompatible:
Huawei: HW-200200CP1 HUAWEI SuperCharge Wall Charger
UGREEN: CD137 PPS Quick Charger (2A & 3A)
Nubia: NB-A930A-USBA-1 (for Red Magic mobile phone); NB-A1150A-USBA-C (for Red Magic 5G mobile phone)
Baseus: CCGAN120C (supports PPS fast charging protocol), CCCJG30CC, and BS-CH907 adapter
ZMI: HA722
Samsung: EP-TA845
Apple: A1947 (for 2018 Macbook Pro)
ROCK: RWC-0443
Charging method 2: Use the Osmo Action 3 Multifunctional Battery Case for battery charging, support PPS/PD fast charging protocol, and the battery supports up to 23W fast charging.
Note:
1. It is recommended to use the DJI 30W charger for charging.
2. Charge using a charger that supports PD/PPS fast charging protocol, and up to 23W fast charging is supported.
3. Common mobile phone adapter models that are currently known to be incompatible:
Huawei: HW-200200CP1 HUAWEI SuperCharge Wall Charger
UGREEN: CD137 PPS Quick Charger (2A & 3A)
Nubia: NB-A930A-USBA-1 (for Red Magic mobile phone); NB-A1150A-USBA-C (for Red Magic 5G mobile phone)
Baseus: CCGAN120C (supports PPS fast charging protocol), CCCJG30CC, and BS-CH907 adapter
ZMI: HA722
Samsung: EP-TA845
Apple: A1947 (for 2018 Macbook Pro)
ROCK: RWC-0443
What are the installation and disassembly methods for Osmo Action 3 Lens Protective Cover?
Rotate the protective cover counterclockwise to remove it.
Rotate the protective cover clockwise to install it.
Rotate the protective cover clockwise to install it.
What are the installation and disassembly methods for Osmo Action 3 USB-C Cover?
To open the USB-C port cover:
Press and hold the USB-C port cover unlock button, and push in the direction indicated on the button to open it.
To remove the USB-C port cover:
Open the USB-C port cover, and gently pull it out in the vertical direction of the camera.
To install the cover:
Fit the hinge in the USB-C port cover, and press it gently in place.
Press and hold the USB-C port cover unlock button, and push in the direction indicated on the button to open it.
To remove the USB-C port cover:
Open the USB-C port cover, and gently pull it out in the vertical direction of the camera.
To install the cover:
Fit the hinge in the USB-C port cover, and press it gently in place.
What are the installation and disassembly methods for Osmo Action 3 battery compartment cover
To open the battery compartment cover:
Press and hold the battery compartment cover unlock button, and push in the direction indicated by the unlock button.
To remove the battery compartment cover:
Open the battery compartment cover, and gently pull it out in the vertical direction of the camera.
To install the cover:
Fit the hinge in the battery compartment cover, and press it gently in place.
Press and hold the battery compartment cover unlock button, and push in the direction indicated by the unlock button.
To remove the battery compartment cover:
Open the battery compartment cover, and gently pull it out in the vertical direction of the camera.
To install the cover:
Fit the hinge in the battery compartment cover, and press it gently in place.
Battery
How long does it take to fully charge Osmo Action 3?
When using DJI 30W USB-C Charger, it takes 20 minutes to charge the camera from 0% to 80%, and 49 minutes to fully charge it.
When using DJI 30W USB-C Charger and the Multifunctional Battery Case to charge the three batteries, it takes 56 minutes to charge them all to 80%, and 120 minutes to fully charge them.
After a battery is charged to 80%, it will then be fully charged by trickle charging.
Note: Trickle charging means charging a device using a tiny current, thus ensuring that the battery is truly saturated and thereby extend the battery life.
When using DJI 30W USB-C Charger and the Multifunctional Battery Case to charge the three batteries, it takes 56 minutes to charge them all to 80%, and 120 minutes to fully charge them.
After a battery is charged to 80%, it will then be fully charged by trickle charging.
Note: Trickle charging means charging a device using a tiny current, thus ensuring that the battery is truly saturated and thereby extend the battery life.
Does Osmo Action 3 support using while charging?
Action 3 supports recording in the charging state. However, it may heat up during charging, and thus stop filming when shooting videos with a high frame rate. The charging process may also stop if the camera is noticeably overheating. It is recommended to charge the camera in a 5 to 40℃ environment. In addition, using the camera during charging will affect the battery life. It is recommended to power off the camera for charging, and to use it after it is fully charged.
Function
When shooting in a low-light or dark environment, ghosting appears, or the camera fiercely vibrates. What should I do to fix this issue?
To ensure stable video footage in low-light/dark environment, it is recommended to use the device following the steps below.
1. Enable "Low light stabilization" mode (with PRO mode disabled).
2. Try to hold the camera stably when shooting.
3. Try to shoot in a bright environment.
4. Choose M mode in “Exposure”, and set ISO to 100-12800, and shutter speed to at least 1/200s, as in, 1/200, 1/400, and 1/500. That is, the faster the shutter speed, the better.
5. Disable EIS to see if the video footage can meet your shooting needs.
1. Enable "Low light stabilization" mode (with PRO mode disabled).
2. Try to hold the camera stably when shooting.
3. Try to shoot in a bright environment.
4. Choose M mode in “Exposure”, and set ISO to 100-12800, and shutter speed to at least 1/200s, as in, 1/200, 1/400, and 1/500. That is, the faster the shutter speed, the better.
5. Disable EIS to see if the video footage can meet your shooting needs.
About the Snapshot Function of Osmo Action 3
When the camera is in the off state, press the Shutter/Record Button to start shooting, and press again to end the shooting, and the camera will automatically shut down after 3 seconds.
You can Snapshot to “Video” or “Hyperlapse” in the Settings page.
You can Snapshot to “Video” or “Hyperlapse” in the Settings page.
Does Osmo Action 3 support voice control?
Yes. Osmo Action 3 supports voice commands in English and Mandarin Chinese.
Use voice commands within 1 m around the camera, and it is recommended not to use this function in a noisy environment.
English voice commands:
Start Recording
Stop Recording
Take Photo
Shut Down
Use voice commands within 1 m around the camera, and it is recommended not to use this function in a noisy environment.
English voice commands:
Start Recording
Stop Recording
Take Photo
Shut Down
What are the channel type and direction of the videos captured using Osmo Action 3?
Before recording a video, you can choose Mono or Stereo Channel in PRO mode.
The camera also supports setting “Directional Audio” as “Front” and turning on “Wind Noise Reduction”.
The camera also supports setting “Directional Audio” as “Front” and turning on “Wind Noise Reduction”.
What are the screen-off rules of Osmo Action 3?
The available “Scrn Off When Rec” settings for Osmo Action 3 during recording & live stream are as follows:
3 s, 10 s, 30 s, 1 min, 5 min, 10 min, and never.
To set the screen-off rules when recording, scroll down on the touchscreen to see the menu, tap the “Settings” icon and then “Scrn Off When Rec”.
To set the screen-off rules when live streaming, enter live stream mode, swipe down on the touchscreen, and swipe left and right to configure.
“Scrn Off When Rec” is only working in Video or Slow Motion mode, and not available in Photo and Timelapse modes.
In Timelapse mode, Action 3 is in low power consumption, and the screen will be turned off 10 seconds after the recording starts.
To set the screen-off rules when recording, scroll down on the touchscreen to see the menu, tap the “Settings” icon and then “Scrn Off When Rec”.
To set the screen-off rules when live streaming, enter live stream mode, swipe down on the touchscreen, and swipe left and right to configure.
“Scrn Off When Rec” is only working in Video or Slow Motion mode, and not available in Photo and Timelapse modes.
In Timelapse mode, Action 3 is in low power consumption, and the screen will be turned off 10 seconds after the recording starts.
Why can’t I set the FOV of Osmo Action 3 as “Ultra Wide” in certain modes?
When recording videos in the following formats, Ultra Wide mode is not supported.
1080p 100/120/240
2.7k (16:9) 100/120
4k (16:9) 100/120
Only Standard (Dewarp) is supported in HorizonBalancing and HorizonSteady modes.
1080p 100/120/240
2.7k (16:9) 100/120
4k (16:9) 100/120
Only Standard (Dewarp) is supported in HorizonBalancing and HorizonSteady modes.
Can I set the date and time on Osmo Action 3?
You can set the date and time of your camera in “Settings” > “Date & Time”. The date and time you set will be used to name the materials afterwards.
After connecting your mobile phone to DJI Mimo, the time and date of the phone will be automatically synchronized.
Others
What microSD (SD) cards does Osmo Action 3 support?
1. SanDisk Extreme 32GB V30 A2 UHS-I Speed Grade 3 microSDXC
2. SanDisk Extreme Pro 32GB V30 UHS-I Speed Grade 3 microSDXC
3. Kingston CANVAS GO Plus 64GB UHS-I Speed Grade 3
4. Kingston CANVAS React Plus 64GB UHS-II Speed Grade 3 5. Kingston CANVAS React Plus 64GB UHS-II Speed Grade 3
6. Kingston CANVAS React Plus 128GB UHS-II Speed Grade 3
7. Kingston CANVAS React Plus 256GB UHS-II Speed Grade 3
Note:
1. Action 3 supports microSD card with a storage of up to 256G.
2. Card models that have been tested to be incompatible are as follows:
1) SanDisk Extreme Pro 64GB UHS-I Speed Grade 3 microSDXC
2) SanDisk Extreme Pro 128GB UHS-I Speed Grade 3 microSDXC
When using Action 3 with cards that are not included in the compatibility list or have been tested to be incompatible, it is probable that the recording may stop automatically. Therefore, it is not recommended to use these cards. It is OK if you would like to use them to record videos with a low resolution or low frame rate, but we do not guarantee the security of the footage you captured.
2. SanDisk Extreme Pro 32GB V30 UHS-I Speed Grade 3 microSDXC
3. Kingston CANVAS GO Plus 64GB UHS-I Speed Grade 3
4. Kingston CANVAS React Plus 64GB UHS-II Speed Grade 3 5. Kingston CANVAS React Plus 64GB UHS-II Speed Grade 3
6. Kingston CANVAS React Plus 128GB UHS-II Speed Grade 3
7. Kingston CANVAS React Plus 256GB UHS-II Speed Grade 3
Note:
1. Action 3 supports microSD card with a storage of up to 256G.
2. Card models that have been tested to be incompatible are as follows:
1) SanDisk Extreme Pro 64GB UHS-I Speed Grade 3 microSDXC
2) SanDisk Extreme Pro 128GB UHS-I Speed Grade 3 microSDXC
When using Action 3 with cards that are not included in the compatibility list or have been tested to be incompatible, it is probable that the recording may stop automatically. Therefore, it is not recommended to use these cards. It is OK if you would like to use them to record videos with a low resolution or low frame rate, but we do not guarantee the security of the footage you captured.
How do I connect Osmo Action 3 to DJI Mic?
1. Connect the receiver of DJI MIC to the Osmo Action 3 USB-C port using a Type-C phone adapter.
2. Link the receiver and transmitter of DJI MIC.
2. Link the receiver and transmitter of DJI MIC.