The latest Osmo firmware has been released. Download the firmware update package from the product page on the official DJI website https://www.dji.com/product/osmo/downloads.
You may only use a Micro SD card for this particular firmware upgrade. Restart the Osmo and check the firmware version after the upgrade. In the DJI GO app, tap Settings->General->About to view the firmware version. It should display ‘22.214.171.124+’.
1. When using the Key Combination (Hold down the Trigger and Shutter Button at the same time. Then, pull the power switch down until the System Status Indicator blinks green. Release the power button before releasing the Trigger.) to restore the Wi-Fi settings, the Wi-Fi frequency is also restored to 2.4 GHz.
2. Fixed issue of the camera restarting unexpectedly when recording video at 4096x2160 resolution.
3. Fixed issue of the pan axis drifting in timelapse mode during moving shots.
For more details, read the Firmware Upgrade Guide.
Firmware support for the Inspire 1, Zenmuse X3 gimbal and camera will be released at the end of November. Stay tuned.