Online Customer Service
Monday - Sunday: 9:00 - 21:00 (CET/CEST)
Need assistance? We’re here to help!
Specs
DJI Mic Mini 2 Transmitter
Model
DMMT02
Dimensions
28.58×28.04×13.52 mm (L×W×H)
Weight
Approx. 11 g (excluding the magnet clip and magnet)
Wireless Mode
GFSK 2Mbps
Equivalent Isotropic Radiated Power (EIRP)
< 20 dBm
Wireless Mode Operating Frequency
2.400-2.4835 GHz
Bluetooth Protocol
Bluetooth 5.3
Bluetooth Operating Frequency
2.400-2.4835 GHz
Bluetooth Transmitter Power (EIRP)
< 20 dBm
Battery Type
Li-ion
Battery Capacity
114 mAh
Battery Energy
0.45 Wh
Battery Voltage
3.87 V
Charging Specification
Max 5 V
Charging Temperature
5° to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
Approx. 70 minutes
Operating Time
Approx. 11.5 hours
Measured using DJI Mic Mini 2 (2 TX + 1 RX), with noise cancellation off, during close-range audio recording under interference-free conditions, with the transmitter connected to the receiver and the receiver connected to a camera via the Camera Audio Cable (3.5mm TRS).
DJI Mic Mini Receiver
Model
DMMR01
Dimensions
46.50×29.61×19.32 mm (L×W×H)
Weight
Approx. 17.8 g (including the interface cover)
Wireless Mode
GFSK 2Mbps
Equivalent Isotropic Radiated Power (EIRP)
< 20 dBm
Operating Frequency
2.400-2.4835 GHz
Bluetooth Protocol
Bluetooth 5.3
Bluetooth Transmitter Power (EIRP)
< 20 dBm
Bluetooth Operating Frequency
2.400-2.4835 GHz
Battery Type
Li-ion
Battery Capacity
170 mAh
Battery Energy
0.66 Wh
Battery Voltage
3.87 V
Charging Specification
Max 5 V
Charging Temperature
5° to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
Approx. 100 minutes
Operating Time
Approx. 10.5 hours
Measured using DJI Mic Mini 2 (2 TX + 1 RX), with noise cancellation off, during close-range audio recording under interference-free conditions, with the transmitter connected to the receiver and the receiver connected to a camera via the Camera Audio Cable (3.5mm TRS).
DJI Mic Mini 2 Charging Case
Model
DMMC02
Dimensions
106.30×42.50×59.20 mm (L×W×H)
Weight
Approx. 159.3 g (charging case only)
Battery Type
Li-ion
Battery Capacity
1950 mAh
Battery Energy
7.55 Wh
Battery Voltage
3.87 V
Charging Specification
Max 5 V, 3 A
Charging Temperature
5° to 40° C (41° to 104° F)
Operating Temperature
5° to 45° C (41° to 113° F)
Charging Time
Approx. 2 hours
Charging Cycles for TX and RX
When charging two transmitters and one receiver simultaneously, a fully charged charging case can fully charge them for approx. 3.6 times.
DJI Mic Series Mobile Receiver
Model
DMMR02
Dimensions
39.26×27.26×8.97 mm (L×W×H)
Weight
Approx. 6.5 g
Wireless Mode
GFSK 2Mbps
Equivalent Isotropic Radiated Power (EIRP)
< 20 dBm
Operating Frequency
2.400-2.4835 GHz
Bluetooth Protocol
Bluetooth 5.3
Bluetooth Transmitter Power (EIRP)
< 20 dBm
Bluetooth Operating Frequency
2.400-2.4835 GHz
Charging Temperature
5° to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
DJI Mic Mini 2 Charging Case (1 TX + 1 Mobile RX)
Model
DMMCS2
Dimensions
78.8×33.07×44.70 mm (L×W×H)
Weight
Approx. 71.0 g (charging case only)
Battery Type
Li-ion
Battery Capacity
275 mAh
Battery Energy
1.07 Wh
Battery Voltage
3.87 V
Charging Specification
Max 5 V, 3 A
Charging Temperature
5° to 40° C (41° to 104° F)
Operating Temperature
5° to 45° C (41° to 113° F)
Charging Time
Approx. 1 hour
Charging Cycles for TX
Approx. 1.3 cycles when charging one TX
General
Polar Pattern
Omnidirectional
Frequency Response
Low Cut Off: 20 Hz - 20 kHz
Low Cut On: 100 Hz - 20 kHz
Maximum Sound Pressure Level (SPL)
120 dB SPL@1% THD
Max Input Level (3.5 mm)
-
Equivalent Noise
24 dBA
Monitor Interface Output Power
20 mW@1 kHz, 32 Ω (DJI Mic Series Mobile Receiver)
Max Transmission Distance
400 m*
300 m**
200 m***
* When used with the DJI Mic Mini Receiver in DJI Mic Mini 2 (2 TX + 1 RX), transmission distance can reach up to 400 m in open, unobstructed, interference-free environments.
** When used with the DJI Mic Series Mobile Receiver in green light mode with two DJI Mic Mini 2 or two DJI Mic Mini transmitters, transmission distance can reach up to 300 m in open, unobstructed, interference-free environments.
*** When used with the DJI Mic Series Mobile Receiver in blue light mode, mixing any two from DJI Mic Mini 2, DJI Mic 3, DJI Mic Mini, or DJI Mic 2 transmitters, transmission distance can reach up to 200 m in open, unobstructed, interference-free environments.
Tutorial Videos
FAQ
DJI Mic Mini 2
What can I use DJI Mic Mini 2 with?
You can use DJI Mic Mini 2 with a range of devices, including cameras, smartphones (via USB-C/Lightning adapter or via direct Bluetooth connection) and computers.
DJI Mic Mini 2 supports the DJI OsmoAudio connection ecosystem. The transmitter supports direct Bluetooth connection to Osmo Pocket 4, Osmo 360, Osmo Nano, or Osmo Action 6 without a receiver, delivering premium audio and simplifying your gear and workflow.
For details, please visit the Downloads page of the DJI Mic Mini 2 website for the Mobile Phone & Tablet Compatibility List and OsmoAudio Compatibility List.
Osmo Pocket 4, Osmo 360, Osmo Nano, and Osmo Action 6 are sold separately.
DJI Mic Mini 2 supports the DJI OsmoAudio connection ecosystem. The transmitter supports direct Bluetooth connection to Osmo Pocket 4, Osmo 360, Osmo Nano, or Osmo Action 6 without a receiver, delivering premium audio and simplifying your gear and workflow.
For details, please visit the Downloads page of the DJI Mic Mini 2 website for the Mobile Phone & Tablet Compatibility List and OsmoAudio Compatibility List.
Osmo Pocket 4, Osmo 360, Osmo Nano, and Osmo Action 6 are sold separately.
What are the differences between DJI Mic Mini 2 combos? How should I choose?
DJI Mic Mini 2 (2 TX + 1 RX + Charging Case) includes a charging case, one receiver, and two transmitters, suitable for two-person audio recording, and providing extended battery life.
DJI Mic Mini 2 (1 TX + 1 RX) includes one receiver and one transmitter, suitable for single-person audio recording of individual creators.
DJI Mic Mini 2 (2 TX + 1 Mobile RX + Charging Case) includes a charging case, one mobile receiver, and two transmitters. It provides extended battery life and is suitable for two-person audio recording with smartphones.
DJI Mic Mini 2 (1 TX + 1 Mobile RX + Charging Case) includes a charging case, one mobile receiver, and one transmitter. It provides extended battery life and is suitable for solo creators and other single-person audio recording scenarios with smartphones.
The DJI Mic Mini 2 Transmitter can be used with mobile phones, Osmo Pocket 4, Osmo 360, Osmo Nano, Osmo Action 6, and other ecosystem devices.
The DJI Mic Series Mobile Receiver can be used with smartphones (USB-C/Lightning port), computers (USB-C port), Osmo Action 4 (USB-C port), Action 5 Pro (USB-C port), Osmo Pocket 4 (USB-C port), Osmo 360 (USB-C port), and more.
DJI Mic Mini 2 (1 TX + 1 RX) includes one receiver and one transmitter, suitable for single-person audio recording of individual creators.
DJI Mic Mini 2 (2 TX + 1 Mobile RX + Charging Case) includes a charging case, one mobile receiver, and two transmitters. It provides extended battery life and is suitable for two-person audio recording with smartphones.
DJI Mic Mini 2 (1 TX + 1 Mobile RX + Charging Case) includes a charging case, one mobile receiver, and one transmitter. It provides extended battery life and is suitable for solo creators and other single-person audio recording scenarios with smartphones.
The DJI Mic Mini 2 Transmitter can be used with mobile phones, Osmo Pocket 4, Osmo 360, Osmo Nano, Osmo Action 6, and other ecosystem devices.
The DJI Mic Series Mobile Receiver can be used with smartphones (USB-C/Lightning port), computers (USB-C port), Osmo Action 4 (USB-C port), Action 5 Pro (USB-C port), Osmo Pocket 4 (USB-C port), Osmo 360 (USB-C port), and more.
Do I need to activate DJI Mic Mini 2?
DJI Mic Mini 2 is ready to use without activation. You can scan the QR code on the package to register for a one-year warranty extension.
How do I update the firmware of the DJI Mic Mini 2 transmitters, receiver, or mobile receiver?
1. Connect the DJI Mic Mini Receiver to the phone via the DJI Mic Mini Mobile Phone Adapter (USB-C), and update the firmware for both the receiver and transmitter in the DJI Mimo app.
2. The mobile receiver can be connected to a phone via the USB-C plug or with the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), allowing firmware updates for both the receiver and the DJI Mic Mini/DJI Mic Mini 2 transmitter in the DJI Mimo app. If there are two DJI Mic 2/Mic 3 transmitters connected to the mobile receiver, or a mix of Mic Mini 2, Mic 2 and Mic 3 transmitters (via blue light mode), you can't upgrade both transmitters directly, and you need to upgrade each transmitter individually. Please refer to the official website of DJI Mic 2 and DJI Mic 3 respectively.
3. A DJI Mic Mini 2 transmitter can also connect directly to a phone via Bluetooth to complete its firmware update.
The DJI Mic Mini Mobile Phone Adapter (USB-C) is sold separately.
2. The mobile receiver can be connected to a phone via the USB-C plug or with the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), allowing firmware updates for both the receiver and the DJI Mic Mini/DJI Mic Mini 2 transmitter in the DJI Mimo app. If there are two DJI Mic 2/Mic 3 transmitters connected to the mobile receiver, or a mix of Mic Mini 2, Mic 2 and Mic 3 transmitters (via blue light mode), you can't upgrade both transmitters directly, and you need to upgrade each transmitter individually. Please refer to the official website of DJI Mic 2 and DJI Mic 3 respectively.
3. A DJI Mic Mini 2 transmitter can also connect directly to a phone via Bluetooth to complete its firmware update.
The DJI Mic Mini Mobile Phone Adapter (USB-C) is sold separately.
How do I link the DJI Mic Mini 2 transmitter with the receiver, and with the mobile receiver?
The transmitters and receiver in the same combo are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the transmitters and receiver into the charging case and they will link automatically.
Method 2: Power on the transmitters and the receiver. Press and hold the Linking Button on the transmitters and the receiver. When the System Status LED on the transmitter blinks green and blue alternately, it indicates the linking is in progress. When the LED turns solid green, the linking is completed.
Method 3: Press and hold the Linking Button on the mobile receiver to enter pairing mode (the Transmitter Status LED will flash green). Next, press and hold the Linking Button on each Mic Mini and Mic Mini 2 transmitter in turn to put them into pairing mode. After pairing is successful, the System Status LED on the transmitter and the Transmitter Status LED on the receiver will turn solid green.
By double-pressing the Linking Button on the receiver and then pressing and holding the button, you can re-enter pairing mode (the Transmitter Status LED will flash blue). At this point, you can connect two DJI Mic 2 or Mic 3 transmitters, or mix and match Mic Mini, Mic Mini 2, Mic 2, and Mic 3 transmitters. After pairing is successful, the System Status LED on the transmitter and the Transmitter Status LED on the receiver will turn solid blue.
You can power off during pairing to end linking during the process.
Method 1: Put the transmitters and receiver into the charging case and they will link automatically.
Method 2: Power on the transmitters and the receiver. Press and hold the Linking Button on the transmitters and the receiver. When the System Status LED on the transmitter blinks green and blue alternately, it indicates the linking is in progress. When the LED turns solid green, the linking is completed.
Method 3: Press and hold the Linking Button on the mobile receiver to enter pairing mode (the Transmitter Status LED will flash green). Next, press and hold the Linking Button on each Mic Mini and Mic Mini 2 transmitter in turn to put them into pairing mode. After pairing is successful, the System Status LED on the transmitter and the Transmitter Status LED on the receiver will turn solid green.
By double-pressing the Linking Button on the receiver and then pressing and holding the button, you can re-enter pairing mode (the Transmitter Status LED will flash blue). At this point, you can connect two DJI Mic 2 or Mic 3 transmitters, or mix and match Mic Mini, Mic Mini 2, Mic 2, and Mic 3 transmitters. After pairing is successful, the System Status LED on the transmitter and the Transmitter Status LED on the receiver will turn solid blue.
You can power off during pairing to end linking during the process.
How many recording modes does DJI Mic Mini 2 provide?
DJI Mic Mini 2 has three recording modes: M (Mono), S (Stereo), and Ms (Mono Safety Track).
1. S: Stereo mode. Audio from the two transmitters is recorded via separate channels.
2. M: Mono mode. In Mono mode, the audio recorded by the two transmitters will be combined into one channel.
3. Ms: Mono with Safety Track mode. DJI Mic Mini 2 will record dual tracks, with the main track at normal volume and a backup track at -6 dB to protect against distortion in cases of sudden source volume increases.
If you use Ms (Mono Safety Track) mode, you will need to separate the tracks during post-production.
1. S: Stereo mode. Audio from the two transmitters is recorded via separate channels.
2. M: Mono mode. In Mono mode, the audio recorded by the two transmitters will be combined into one channel.
3. Ms: Mono with Safety Track mode. DJI Mic Mini 2 will record dual tracks, with the main track at normal volume and a backup track at -6 dB to protect against distortion in cases of sudden source volume increases.
If you use Ms (Mono Safety Track) mode, you will need to separate the tracks during post-production.
What functions does the DJI Mic Mini 2 Charging Case provide?
The DJI Mic Mini 2 Charging Case can store transmitters with the windscreen and magnetic front cover installed, and also with the magnet or magnetic clip attached. Inside the charging case lid, you can store the magnet and magnetic clip, or audio adapter cable. When storing the DJI Mic Series Mobile Receiver, the left side inside the charging case lid can store the magnet or magnetic clip, while the right side can store only the magnet. When fully charged, it can charge two transmitters and one receiver approx. 3.6 times.
The DJI Mic Mini 2 Charging Case (1 TX + 1 Mobile RX) can fully charge a transmitter about 1.3 times on a full battery. It can store a transmitter with magnetic front cover installed, and also with the magnet or magnetic clip installed. Inside the charging case lid, you can store the magnet, or magnetic clip.
To prevent product damage, avoid stacking items in the charging case.
The DJI Mic Mini Mobile Phone Adapter (Lightning) is sold separately.
Only one of the magnetic clip, magnet, or 3.5 mm TRS cable can be stored at a time.
If you need to store a DJI Mic Series Mobile Receiver, only the magnet can be stored in the right slot of the upper tray.
Both charging cases support storing and charging the DJI Mic 3 Transmitter.
The DJI Mic Mini 2 Charging Case (1 TX + 1 Mobile RX) can fully charge a transmitter about 1.3 times on a full battery. It can store a transmitter with magnetic front cover installed, and also with the magnet or magnetic clip installed. Inside the charging case lid, you can store the magnet, or magnetic clip.
To prevent product damage, avoid stacking items in the charging case.
The DJI Mic Mini Mobile Phone Adapter (Lightning) is sold separately.
Only one of the magnetic clip, magnet, or 3.5 mm TRS cable can be stored at a time.
If you need to store a DJI Mic Series Mobile Receiver, only the magnet can be stored in the right slot of the upper tray.
Both charging cases support storing and charging the DJI Mic 3 Transmitter.
Are the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) and DJI Mic Series Mobile Receiver Adapter (USB-C to USB-C) interchangeable with the mobile phone adapters of DJI Mic, DJI Mic 2, DJI Mic 3, DJI Mic Mini, and DJI Pocket 2?
They are interchangeable with the mobile phone adapter of DJI Mic Mini, not interchangeable with other devices.
Are the DJI Mic Mini 2's transmitters and receiver compatible with those of DJI Mic, DJI Mic 2, DJI Mic 3, and DJI Mic Mini?
They are compatible with the DJI Mic Mini transmitters and receiver, not compatible with other devices.
What is the maximum transmission distance between DJI Mic Mini 2's transmitters and receiver?
When used with a DJI Mic Mini Receiver and two DJI Mic Mini 2 transmitters, the transmission distance can reach up to 400 meters in an open, interference-free and unobstructed environment.
When used with a DJI Mic Series Mobile Receiver and connected to two DJI Mic Mini 2 or two DJI Mic Mini transmitters in green light mode, the maximum transmission distance can reach up to 300 meters in an open, interference-free and unobstructed environment.
When used with a DJI Mic Series Mobile Receiver and mixed with any two transmitters of DJI Mic Mini 2, DJI Mic 3, DJI Mic Mini, and DJI Mic 2 in blue light mode, the transmission distance can reach up to 200 meters in an open, interference-free and unobstructed environment.
When used with a DJI Mic Series Mobile Receiver and connected to two DJI Mic Mini 2 or two DJI Mic Mini transmitters in green light mode, the maximum transmission distance can reach up to 300 meters in an open, interference-free and unobstructed environment.
When used with a DJI Mic Series Mobile Receiver and mixed with any two transmitters of DJI Mic Mini 2, DJI Mic 3, DJI Mic Mini, and DJI Mic 2 in blue light mode, the transmission distance can reach up to 200 meters in an open, interference-free and unobstructed environment.
How long does it take to fully charge the transmitters and receiver using the DJI Mic Mini 2 Charging Case? How long does it take to fully charge the charging case separately?
It is recommended to use a 5V/2A (max) charger to charge the DJI Mic Mini 2's transmitters, receiver, and charging case.
At room temperature, it takes approximately 100 minutes* and 70 minutes* to fully charge the receiver and transmitters, respectively, using the charging case. It takes approximately 2 hours* to fully charge the DJI Mic Mini 2 Charging Case separately, and about 1 hour* to fully charge the DJI Mic Mini 2 Charging Case (1 TX + 1 Mobile RX).
* Measured in a controlled test environment and is for reference only.
At room temperature, it takes approximately 100 minutes* and 70 minutes* to fully charge the receiver and transmitters, respectively, using the charging case. It takes approximately 2 hours* to fully charge the DJI Mic Mini 2 Charging Case separately, and about 1 hour* to fully charge the DJI Mic Mini 2 Charging Case (1 TX + 1 Mobile RX).
* Measured in a controlled test environment and is for reference only.
How do I enable noise cancelling on DJI Mic Mini 2? How to adjust the noise cancellation levels?
DJI Mic Mini 2 features two levels of noise cancelling.
When used with the DJI Mic Mini Receiver, you can enable or disable noise cancelling by pressing the Power Button on the transmitter once, and set the Strong or Basic noise cancellation level via the DJI Mimo app*.
When used with the DJI Mic Series Mobile Receiver, you can enable or disable noise cancelling by the Noise Cancellation Mode Switch (Off = O, Low = L, High = H). You can't turn the noise cancelling on or off by pressing the Power Button. When using DJI OsmoAudio to directly connect with Osmo Pocket 4, Osmo 360, Osmo Nano, Osmo Action 6, and other ecosystem devices, settings can be adjusted through the respective device menus.
* When the transmitter directly connects to a smartphone, the noise cancellation level cannot be adjusted in the DJI Mimo app; it defaults to the Strong level.
When used with the DJI Mic Mini Receiver, you can enable or disable noise cancelling by pressing the Power Button on the transmitter once, and set the Strong or Basic noise cancellation level via the DJI Mimo app*.
When used with the DJI Mic Series Mobile Receiver, you can enable or disable noise cancelling by the Noise Cancellation Mode Switch (Off = O, Low = L, High = H). You can't turn the noise cancelling on or off by pressing the Power Button. When using DJI OsmoAudio to directly connect with Osmo Pocket 4, Osmo 360, Osmo Nano, Osmo Action 6, and other ecosystem devices, settings can be adjusted through the respective device menus.
* When the transmitter directly connects to a smartphone, the noise cancellation level cannot be adjusted in the DJI Mimo app; it defaults to the Strong level.
What are the updates of DJI Mic Mini 2 compared to DJI Mic Mini?
For more details, refer to the comparison page of the DJI Mic series on the official website.
Does DJI Mic Mini 2 support automatic power-saving and automatic shutdown after inactivity?
The DJI Mic Mini 2 Transmitter supports automatic power-saving, which is effective only when the transmitter is powered on. The transmitter automatically enters sleep mode when it doesn't detect signal from the receiver. It will wake and reconnect to the receiver once the signal is detected again.
DJI Mic Mini 2 supports Auto Power-Off, which needs to be set in advance for both the receiver and transmitter via the DJI Mimo app. The automatic shutdown time is set to 15 minutes. The specific operating logic is as follows:
1. When Auto Power-Off is enabled on both the receiver and transmitter: If no signal is detected, the transmitter will enter power-saving without shutting down, and the receiver will remain powered on. After 15 minutes, both will automatically shut down.
2. When Auto Power-Off is enabled on the receiver, and disabled on the transmitters: If no signal is detected, the transmitter will enter power-saving mode without shutting down, and the receiver will remain powered on. After 15 minutes, the receiver will automatically shut down, while the transmitter continues power-saving without shutting down.
3. When Auto Power-Off is enabled on the transmitter and disabled on the receiver: If no signal is detected, the transmitter will enter power-saving without shutting down, and the receiver will remain powered on. After 15 minutes, the transmitter will automatically shut down, while the receiver remains powered on.
4. When Auto Power-Off is disabled on both the receiver and transmitter: Only the transmitter will perform power-saving mode when no signal is detected, and neither will automatically shut down.
DJI Mic Mini 2 supports Auto Power-Off, which needs to be set in advance for both the receiver and transmitter via the DJI Mimo app. The automatic shutdown time is set to 15 minutes. The specific operating logic is as follows:
1. When Auto Power-Off is enabled on both the receiver and transmitter: If no signal is detected, the transmitter will enter power-saving without shutting down, and the receiver will remain powered on. After 15 minutes, both will automatically shut down.
2. When Auto Power-Off is enabled on the receiver, and disabled on the transmitters: If no signal is detected, the transmitter will enter power-saving mode without shutting down, and the receiver will remain powered on. After 15 minutes, the receiver will automatically shut down, while the transmitter continues power-saving without shutting down.
3. When Auto Power-Off is enabled on the transmitter and disabled on the receiver: If no signal is detected, the transmitter will enter power-saving without shutting down, and the receiver will remain powered on. After 15 minutes, the transmitter will automatically shut down, while the receiver remains powered on.
4. When Auto Power-Off is disabled on both the receiver and transmitter: Only the transmitter will perform power-saving mode when no signal is detected, and neither will automatically shut down.
DJI Mic Mini 2 Magnetic Clip/Magnet
What is the magnetic force of the DJI Mic Mini 2 Magnetic Clip and DJI Mic 3 Magnet?
10 N.
DJI Mic Mini 2 uses single-pole magnetization and can attract iron blocks weighing up to 1.0 kg.
DJI Mic Mini 2 uses single-pole magnetization and can attract iron blocks weighing up to 1.0 kg.
Will the DJI Mic Mini 2 Magnetic Clip and DJI Mic 3 Magnet affect my bank cards?
All magnetic products contain magnets. It is recommended to keep the DJI Mic Mini 2 Magnetic Clip and DJI Mic 3 Magnet away from bank cards, pacemakers, RAM chips, and hard disks.
What should I be aware of when using the DJI Mic Mini 2 Magnetic Clip and DJI Mic 3 Magnet?
1. DO NOT use when wearing heavy clothes (sweaters, down jackets, etc.). The transmitters could fall off due to insufficient magnetic force.
2. Use with caution during vigorous exercise (for example, jumping, sprinting, etc.).
2. Use with caution during vigorous exercise (for example, jumping, sprinting, etc.).
DJI Mic Mini 2 Transmitter
Where can I mount the DJI Mic Mini 2 Transmitter?
The DJI Mic Mini 2 Transmitter can be mounted on collars, lapels, hat brims, and more using the magnetic clip. The magnetic clip allows for attachment in four directions (up, down, left, or right) for optimal audio capture. The transmitter can also be attached to other parts of your clothing using the magnet, such as the middle of soft clothing, to prevent it from sagging. Additionally, the transmitter has a built-in magnet, so it can be attached to metal objects as needed for recording.
How do DJI Mic Mini 2 transmitters receive audio signals? Is the polar pattern directional or omnidirectional?
Omnidirectional.
How many operating modes do DJI Mic Mini 2 transmitters support?
1. Green light mode: Transmitters connect to a receiver via 2.4GHz frequency band.
2. Blue light mode: Transmitters directly connect to select DJI products via DJI OsmoAudio, or connect to smartphones via Bluetooth.
Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
2. Blue light mode: Transmitters directly connect to select DJI products via DJI OsmoAudio, or connect to smartphones via Bluetooth.
Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
When the transmitter is connected to a mobile phone via Bluetooth, does it support audio recording for livestreaming? How do I connect the transmitter to a mobile phone via Bluetooth?
1. It depends on the compatibility of the live streaming app and the mobile phone operating system. You can test it with Bluetooth earphones or headsets. If you cannot record audio with the earphones or headset for live streaming, the transmitter does not support this function when connecting to a mobile phone via Bluetooth. For software compatibility information, refer to the Third-Party App Compatibility List on the Downloads page of the official DJI Mic Mini 2 webpage.
2. To connect, power on the transmitter. Press and hold the Linking Button for two seconds and the mobile phone will automatically search for available Bluetooth devices. Select the DJI Mic Mini 2 Transmitter when it appears and tap to complete linking. When the transmitter's status indicator turns solid blue, the linking is completed. If the mobile phone's Bluetooth cannot find DJI Mic Mini 2, restart Bluetooth on the mobile phone and link again.
2. To connect, power on the transmitter. Press and hold the Linking Button for two seconds and the mobile phone will automatically search for available Bluetooth devices. Select the DJI Mic Mini 2 Transmitter when it appears and tap to complete linking. When the transmitter's status indicator turns solid blue, the linking is completed. If the mobile phone's Bluetooth cannot find DJI Mic Mini 2, restart Bluetooth on the mobile phone and link again.
What devices can the DJI Mic Mini 2 Transmitter connect to wirelessly? How many transmitters can these devices connect to simultaneously?
DJI Mic Mini 2 supports the DJI OsmoAudio connection ecosystem. The DJI Mic Mini 2 Transmitter can directly connect to select DJI products, namely one transmitter for Osmo Action 4, and up to two transmitters for Osmo Pocket 4, Osmo 360, Osmo Nano and Osmo Action 6.
The DJI Mic Mini 2 Transmitter can directly connect to your smartphone via Bluetooth. When the transmitter directly connects to a smartphone, the noise cancellation level cannot be adjusted in the DJI Mimo app, and it defaults to the Strong level; Low Cut settings are also not supported in the DJI Mimo app.
The DJI Mic Mini 2 Transmitter can directly connect to your smartphone via Bluetooth. When the transmitter directly connects to a smartphone, the noise cancellation level cannot be adjusted in the DJI Mimo app, and it defaults to the Strong level; Low Cut settings are also not supported in the DJI Mimo app.
Can I use the DJI Mic Mini 2 Transmitter as a voice recorder?
The DJI Mic Mini 2 Transmitter does not have internal storage, so it cannot be used as a voice recorder.
How do I replace the magnetic front cover on the DJI Mic Mini 2 Transmitter?
The DJI Mic Mini 2 Transmitter features a magnetic, interchangeable front cover and comes standard with Obsidian Black and Glaze White front covers. Additional multi-color windscreens and multi-color magnetic front covers are also available. To replace the front cover, simply pry it off from the groove at the bottom of the transmitter and swap it out.
The DJI Mic Mini 2 Multi-Color Windscreen and the DJI Mic Mini 2 Multi-Color Magnetic Front Cover are sold separately.
The DJI Mic Mini 2 Multi-Color Windscreen and the DJI Mic Mini 2 Multi-Color Magnetic Front Cover are sold separately.
DJI Mic Mini Receiver
How many transmitters can the DJI Mic Mini Receiver link with?
The DJI Mic Mini Receiver and the DJI Mic Series Mobile Receiver can each connect to up to two DJI Mic Mini 2 transmitters simultaneously.
Can the DJI Mic Mini Receiver transmit audio data to devices with XLR input ports?
No.
When the DJI Mic Mini Receiver is connected to a mobile phone, can I play back recorded audio on the mobile phone?
You can enable the plug-free audio playback feature in the DJI Mimo app.
After enabling this feature, you can play back audio from your phone without removing the receiver; when it is disabled, you need to disconnect the receiver to play back audio from your phone.
After enabling this feature, you can play back audio from your phone without removing the receiver; when it is disabled, you need to disconnect the receiver to play back audio from your phone.
Does DJI Mic Mini 2 support charge both the phone and the receiver simultaneously?
Yes. When the DJI Mic Mini Receiver is connected to your phone via a mobile phone adapter, or the DJI Mic Series Mobile Receiver is directly connected to your phone, you can use a charging cable to charge both the mobile phone and the receiver through the receiver's USB-C port.
Is Stereo mode supported when DJI Mic Mini 2 is connected to a phone via a mobile phone adapter?
For a list of compatible devices, please refer to the Downloads page on the DJI Mic Mini 2 official webpage.
Does the DJI Mic Mini Receiver output digital or analog signals?
The DJI Mic Mini Receiver's OUT port outputs analog signals for camera connections.
The DJI Mic Mini Mobile Phone Adapter (USB-C/Lightning) and the DJI Mic Mini Receiver's USB-C port output digital signals.
The DJI Mic Mini Mobile Phone Adapter (USB-C/Lightning) and the DJI Mic Mini Receiver's USB-C port output digital signals.
What is DJI Mic Mini 2's Auto On/Off With Camera? How do I use it?
When the DJI Mic Mini Receiver is connected to a camera via a 3.5mm TRS cable, you can enable this function using the DJI Mimo app and the receiver automatically powers on and off in sync with the camera.
DJI Mic Series Mobile Receiver
How many transmitters can the DJI Mic Series Mobile Receiver connect to at most?
The mobile receiver can connect to up to two transmitters simultaneously.
Which transmitter models are compatible with the DJI Mic Series Mobile Receiver? Is it possible to connect different transmitter models simultaneously?
The mobile receiver can connect to up to two DJI Mic Mini or two DJI Mic Mini 2 transmitters simultaneously. Press and hold the Linking Button on the receiver to enter pairing mode (the Transmitter Status LED will flash green). Next, press and hold the Linking Button on each transmitter in turn to enter pairing mode. After pairing is successful, the LEDs on both the transmitter and receiver will turn solid green.
By double-pressing the Linking Button on the receiver and then pressing and holding the button, you can re-enter pairing mode (the Transmitter Status LED will flash blue). At this point, you can connect two DJI Mic 2 or Mic 3 transmitters, or mix and match Mic Mini, Mic Mini 2, Mic 2, and Mic 3 transmitters. After successful pairing, the LEDs on both the transmitter and receiver show solid blue.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
By double-pressing the Linking Button on the receiver and then pressing and holding the button, you can re-enter pairing mode (the Transmitter Status LED will flash blue). At this point, you can connect two DJI Mic 2 or Mic 3 transmitters, or mix and match Mic Mini, Mic Mini 2, Mic 2, and Mic 3 transmitters. After successful pairing, the LEDs on both the transmitter and receiver show solid blue.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
How do I enable noise cancelling on the mobile receiver? After connecting the mobile receiver, can noise cancelling still be controlled via the transmitter?
The DJI Mic Series Mobile Receiver allows quick adjustment of noise cancellation levels (Off = O, Low = L, High = H) via the Noise Cancellation Mode Switch.
Once the transmitter is connected to the mobile receiver, noise cancellation levels can only be adjusted via the Noise Cancellation Mode Switch on the receiver. It cannot be enabled or disabled via the DJI Mimo app or the transmitter itself.
Once the transmitter is connected to the mobile receiver, noise cancellation levels can only be adjusted via the Noise Cancellation Mode Switch on the receiver. It cannot be enabled or disabled via the DJI Mimo app or the transmitter itself.
How do I adjust the gain on the DJI Mic Series Mobile Receiver?
After connecting the mobile receiver to your phone using the USB-C plug or the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), open the DJI Mimo app to adjust the gain settings on your phone.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
After connecting the mobile receiver, can the parameters of the DJI Mic Mini, DJI Mic Mini 2, Mic 2, and Mic 3 transmitters be adjusted on the mobile receiver?
After connecting DJI Mic Mini, Mic Mini 2, Mic 2, or Mic 3 transmitters to the mobile receiver, you can adjust noise cancellation levels via the Noise Cancellation Mode Switch, and also fine-tune additional transmitter settings in the DJI Mimo app.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
Does the mobile receiver support use while charging with a phone?
When the mobile receiver is connected to a phone via the USB-C plug, it can be powered by the phone. If your phone uses a Lightning port, you will need to purchase a DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) separately to power the receiver from your phone.
Additionally, if the USB-C Charging Port on the receiver is connected to an external power source, it can simultaneously charge both the receiver and the phone, allowing for use while charging.
Removing the external power source will temporarily interrupt the audio. Please do not disconnect the external power source during use.
Additionally, if the USB-C Charging Port on the receiver is connected to an external power source, it can simultaneously charge both the receiver and the phone, allowing for use while charging.
Removing the external power source will temporarily interrupt the audio. Please do not disconnect the external power source during use.
Does the mobile receiver support stereo sound? How can I check the current recording mode?
The mobile receiver supports Mono, Stereo (dual-channel), and Ms (Mono Safety Track) modes.
After connecting the mobile receiver to your phone using the USB-C plug or the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), open the DJI Mimo app and check the current recording mode on your phone.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
After connecting the mobile receiver to your phone using the USB-C plug or the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), open the DJI Mimo app and check the current recording mode on your phone.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
Which devices are compatible with the mobile receiver?
Currently compatible with smartphones (USB-C or Lightning port), computers (USB-C port), Osmo Action 4 (USB-C port), Action 5 Pro (USB-C port), Action 6 (USB-C port), Osmo Pocket 4 (USB-C port), Osmo 360 (USB-C port), and more.
Do iPhone devices with a Lightning port support the mobile receiver?
You need to purchase the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) separately before use.
Can the mobile receiver be connected to a camera?
It does not support connecting to a camera via a 3.5mm TRS cable.
If you need to use it with a Sony camera that supports a hot shoe, you can connect it using the DJI Mic Series Camera Adapter (for Sony Cameras).
The DJI Mic Series Camera Adapter (for Sony Cameras) is sold separately.
If you need to use it with a Sony camera that supports a hot shoe, you can connect it using the DJI Mic Series Camera Adapter (for Sony Cameras).
The DJI Mic Series Camera Adapter (for Sony Cameras) is sold separately.
Does the mobile receiver support use with the DJI Mic Series Camera Adapter?
Yes.
The DJI Mic Series Camera Adapter (for Sony Cameras) is sold separately.
The DJI Mic Series Camera Adapter (for Sony Cameras) is sold separately.
Does the mobile receiver support monitoring? How do I monitor audio?
The USB-C Charging Port on the mobile receiver supports monitoring. It supports monitoring via USB-C port headphones that use analog transmission, or by connecting 3.5mm audio jack headphones via an analog transmission adapter.
The monitoring volume can be adjusted in the DJI Mimo app.
The monitoring volume can be adjusted in the DJI Mimo app.
Does the mobile receiver support firmware updates? Can it update the transmitter?
The DJI Mic Series Mobile Receiver can connect to a phone via USB-C plug or via the DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning), and upgrade up to two DJI Mic Mini/DJI Mic Mini 2 transmitters at the same time. However, if the DJI Mic Series Mobile Receiver is connected to two Mic 3/Mic 2 transmitters, or a mixed connection with one Mic 3/Mic 2 transmitter (via blue light mode), each transmitter must be upgraded separately. For update instructions, please refer to the official website.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
The DJI Mic Series Mobile Receiver Adapter (USB-C to Lightning) is sold separately.
What is the wireless transmission range of the mobile receiver? Is there any difference compared to the DJI Mic Mini Receiver?
When the DJI Mic Series Mobile Receiver is connected to two DJI Mic Mini or DJI Mic Mini 2 transmitters, the maximum wireless transmission range is 300 meters.
When the DJI Mic Mini Receiver is connected to two DJI Mic Mini or Mic Mini 2 transmitters, the maximum wireless transmission distance is 400 meters.
When the DJI Mic Series Mobile Receiver is connected to one DJI Mic Mini/Mic Mini 2 transmitter and one DJI Mic 2/Mic 3 transmitter simultaneously, the maximum wireless transmission distance is 200 meters.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
When the DJI Mic Mini Receiver is connected to two DJI Mic Mini or Mic Mini 2 transmitters, the maximum wireless transmission distance is 400 meters.
When the DJI Mic Series Mobile Receiver is connected to one DJI Mic Mini/Mic Mini 2 transmitter and one DJI Mic 2/Mic 3 transmitter simultaneously, the maximum wireless transmission distance is 200 meters.
For transmitter compatibility, please visit the Downloads page of the DJI Mic Mini 2 website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
DJI Mic Mini 2 Accessories
What functions can be achieved when using DJI Mic Mini 2 with the DJI Mic Series Camera Adapter?
The DJI Mic Series Camera Adapter lets you connect the DJI Mic Mini Receiver directly to a Sony camera's MI hot shoe, allowing for audio recording without the Camera Audio Cable (3.5mm TRS). It supports 48kHz 24-bit digital audio recording. When using this adapter, the Sony camera can also power the receiver.
After enabling the Auto On/Off With Camera feature in the DJI Mimo app, the receiver, when connected to the camera via the hot shoe, will automatically turn on when the camera is turned on and turn off when the camera is turned off.
Additionally, this adapter can solve the issue of electrical noise that may occur when certain Sony cameras (such as A7S3, FX3, A6700, etc.) are connected to specific microphones using a 3.5 mm TRS cable.
After enabling the Auto On/Off With Camera feature in the DJI Mimo app, the receiver, when connected to the camera via the hot shoe, will automatically turn on when the camera is turned on and turn off when the camera is turned off.
Additionally, this adapter can solve the issue of electrical noise that may occur when certain Sony cameras (such as A7S3, FX3, A6700, etc.) are connected to specific microphones using a 3.5 mm TRS cable.
What cameras are compatible with the DJI Mic Series Camera Adapter?
The DJI Mic Series Camera Adapter is only suitable for Sony cameras with an MI hot shoe. For a list of compatible devices, please refer to the Downloads page on the DJI Mic Mini 2 official website.
Can the DJI Mic Series Camera Adapter be used with DJI Mic or DJI Mic 2?
No.
What is the difference between using the DJI Mic Series Camera Adapter and using the Camera Audio Cable (3.5mm TRS)?
The DJI Mic Series Camera Adapter enables digital audio recording and allows the camera to power the receiver, while the Camera Audio Cable (3.5mm TRS) supports analog audio recording. With either connection method, the receiver supports Auto On/Off With Camera.
What should I do if my camera shows an incompatibility message when using the DJI Mic Series Camera Adapter?
If your camera does not support digital audio signals, it will not recognize the DJI Mic Series Camera Adapter. For a list of compatible devices, please refer to the Downloads page on the DJI Mic Mini 2 official website.
Contact Us
Hotline Service
English: +31 20 654 5202
Monday - Sunday: 9:00 - 21:00 (CET/CEST)