SPECS

RoboMaster S1

Camera

  • FOV

  • 120°
  • Max Still Photo Resolution

  • 2560×1440
  • Max Video Resolution

  • FHD: 1080/30fps
    HD: 720/30fps
  • Max Video Bitrate

  • 16 Mbps
  • Photo Format

  • JPEG
  • Video Format

  • MP4
  • Sensor

  • CMOS 1/4″; Effective pixels: 5 MP
  • Operating Temperature Range

  • -10 to 40 °C (14 to 104 °F)

Narrow Infrared Units

  • Effective Range [1]

  • 6 m (in indoor lighting conditions)
  • Effective Area

  • Varies from 10° to 40°
    Effective area decreases as distance from the target increases.

Wide Infrared Units

  • Effective Range [1]

  • 3 m (in indoor lighting conditions)
  • Effective Width

  • 360° (in indoor lighting conditions)

Hit Detector

  • Detection Requirements

  • For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
  • Maximum Detection Frequency

  • 15 Hz

S1

  • Weight

  • Approx. 3.3 kg
  • Dimensions

  • 320×240×270 mm (length × width × height)
  • Chassis Speed Range

  • 0-3.5 m/s (forward)
    0-2.5 m/s (backward)
    0-2.8 m/s (sideways)
  • Max Chassis Rotational Speed

  • 600°/s

M3508I Brushless Motor

  • Max Rotational Speed

  • 1000 rpm
  • Max Torque

  • 0.25N·m
  • Max Output Power

  • 19 W
  • Operating Temperature Range

  • -10 to 40 °C (14 to 104 °F)
  • Driver

  • FOC
  • Control Method

  • Closed-loop speed control
  • Protection

  • Overvoltage protection
    Overtemperature protection
    Soft-start
    Short-circuit protection
    Chip and sensor anomaly detection

Blaster

  • Controllable Launching Frequency

  • 1-8/s
  • Max Launching Frequency

  • 10/s
  • Initial Launching Speed

  • Approx. 26 m/s
  • Average Load

  • Approx. 430

Gimbal

  • Controllable Range

  • Pitch: -20° to +35°
    Yaw: ±250°
  • Mechanical Range

  • Pitch: -24° to +41°
    Yaw: ±270°
  • Max Rotational Speed

  • 540°/s
  • Vibration Control Precision (on the flat surface and with the Blaster idle)

  • ±0.02°

Intelligent Controller

  • Latency [2]

  • Connection via Wi-Fi: 80-100ms
    Connection via Router: 100-120ms
    (unobstructed, free of interference)
  • Live View Quality

  • 720p/30fps
  • Max Live View Bitrate

  • 6 Mbps
  • Operating Frequency [3]

  • 2.4 GHz, 5.1 GHz, 5.8 GHz
  • Operating Mode

  • Connection via Wi-Fi, Connection via Router
  • Max Transmission Distance [4]

  • Connection via Wi-Fi:
    FCC, 2.4 GHz 140 m,5.8 GHz 90 m
    CE, 2.4 GHz 130 m,5.8 GHz 70 m
    SRRC, 2.4 GHz 130 m,5.8 GHz 90 m
    MIC, 2.4 GHz 130 m

    Connection via Router:
    FCC, 2.4 GHz 190 m,5.8 GHz 300 m
    CE, 2.4 GHz 180 m,5.8 GHz 70 m
    SRRC, 2.4 GHz 180 m,5.8 GHz 300 m
    MIC,2.4 GHz 180 m
  • Transmission Power (EIRP)

  • 2.400-2.4835 GHz
    FCC: ≤30 dBm
    SRRC: ≤20 dBm
    CE: ≤19 dBm
    MIC: ≤20 dBm

    5.150-5.250 GHz
    FCC: ≤30 dBm
    SRRC: ≤23 dBm
    CE: ≤20 dBm
    MIC: ≤23 dBm

    5.725-5.850 GHz
    FCC: ≤30dBm
    SRRC: ≤30dBm
    CE: ≤14 dBm
  • Transmission Standard

  • IEEE802.11a/b/g/n

Intelligent Battery

  • Capacity

  • 2400 mAh
  • Nominal Charging Voltage

  • 10.8 V
  • Maximum Charging Voltage

  • 12.6 V
  • Battery Type

  • LiPo 3S
  • Energy

  • 25.92 Wh
  • Weight

  • 169 g
  • Operating Temperature Range

  • -10 to 40 °C (14 to 104 °F)
  • Charging Temperature Range

  • 5 to 40 °C (41 to 104 °F)
  • Maximum Charging Power

  • 29 W
  • Battery Life in Use

  • 35 minutes (measured at a constant speed of 2 m/s on a flat surface)
  • Battery Life on Standby

  • Approx. 100 minutes

Charger

  • Input

  • 100-240 V, 50-60Hz, 1A
  • Output

  • Port: 12.6 V=0.8A or 12.6 V=2.2A
  • Voltage

  • 12.6 V
  • Rated Voltage

  • 28 W

Gel Bead

  • Diameter

  • 5.9-6.8 mm [2]
  • Weight

  • 0.12-0.17 g [2]

App

  • App

  • RoboMaster
  • iOS

  • iOS 10.0.2 or later
  • Android

  • Android 5.0 or later

Router

  • Recommended Routers

  • TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)
    TP-Link Archer C7; NETGEAR X6S (International)
  • Recommended outdoor power supply solution for routers

  • Laptop Power Bank (match the input power of the router)

microSD card

  • Supported SD Cards

  • Supports microSD cards with a capacity up to 64GB

Others

  • Notes

  • 1. Use of the infrared units will be affected in outdoor or infrared-intensive environment.
  • 2. Measured in an interference-free and unobstructed environment with a distance of approximately one meter between the mobile device, the router, and the S1. The iOS device used was an iPhone X. The results of testing with different Android device may be different.
  • 3. Outdoor use of the 5.1 GHz and 5.8 GHz frequency bands is prohibited in some areas. Always follow all local laws and regulations in your country or region.
  • 4. Measured in an interference-free and unobstructed environment. For Connection via Wi-Fi, the mobile device used for testing was a sixth-generation iPad (released in 2018). For Connection via Router, several router models were used for testing. FCC: TP-Link Archer C9; SRRC: TP-Link WDR8600; CE: TP-Link Archer C7; MIC: WSR-1160DHP3.
  • 5. The gel beads will swell to a usable size after being soaked in water for four hours.