The small and powerful DJI Takyon Z650 is made for racing. A custom designed System on Chip (SOC) and a modular design combine with efficient and intelligent motor control algorithms to make the Takyon Z650 an extraordinarily fast and ultra-accurate motor control system. The Z650 supports 3-6S 9.6 - 26.1 V batteries with a maximum working current of 50 A, ensuring powerful propulsion.

Basic Features

FeaturesExcellent Motor Compatibility
Active Braking System
Adjustable Motor PWM Frequency
3-6S LiPo Battery
Maximum Working Currency up to 60A
Two Throttle Signal ModeRegular throttle signal: 30Hz to 500 Hz PWM signal
OneShot125 signal:30-650 Hz
High Rotational Speed Motors40000rpm(7 pole pairs)
280000rpm(1 pole pair)
PC Assistant SoftwareTiming Settings
Active braking settings
Acceleration Settings
Startup tone settings
Motor rotation direction settings
Motor rotation direction testing
Throttle range settings
Firmware upgrade
Output PWM Frequency settings
Complete Electromagnetic Compatibility TestRadiated emission
Radiated RF electromagnetic field immunity
Electrostatic discharge immunity

Extreme Conditions

Input VoltageMinimum:9.6 V
Maximum:26.1 V
Allowable Current (Continuous)Maximum:50 A
Peak Current (< 3 sec)Maximum:60 A
PWM Input Signal LevelMaximum:5.0 V
Minimum:3.0 V
Compatible OneShot125 Signal FrequencyMinimum:30 Hz
Maximum:650 Hz
Compatible Regular Signal FrequencyMinimum:30 Hz
Maximum:500 Hz
Operating TemperatureMinimum:-10 ℃
Maximum:50 ℃
Note*The data above is measured at a temperature of 25°C and a voltage of 22.2V


Quiescent CurrentMinimum Value:0.0221A
Typical Value:0.0227 A
Maximum Valu:0.0235 A
Full Throttle Working Current*Minimum Value:47.394 A
Typical Value:50.137 A
Maximum Valu:53.469 A
*Testing Environment: Propeller:2255;Motor:3510 Motor(KV350)
Hovering ESC Temperature**Typical Value:30.4 ℃
**Testing Environment: Aircraft:diagonal wheelbase 600mm;Propeller:1345 Propeller;Motor:3510Motor(KV350);Battery:6S LiPo,4500mAh;Total Aircraft Weight:1866g

General Specs

Max Allowable Voltage26.1 V
Max Allowable Current *(Continuous)50 A
Max Peak Current (< 3 sec)60 A
Max OneShot125 Signal Frequency500 Hz
Default Output PWM Frequency16 kHz
Weight (not including wires)10 g
Battery3-6S LiPo
Operating Temperature-10℃ to 40℃
Compatible Motor ModelsIncluding but not limited to: 1306、1804、1806、2216、2312、3510、3515、3520、4010、4114、4216、5010、6215
Note*meausred in ventilated environment and at a temperature of 25°C.

Recommended environment

Input VoltageMinimum Value:9.6 V
Typical Value:22.2 V
Maximum Value:26.1 V
PWM Input Signal LevelMinimum Value:3.0 V
Maximum Value:5.0 V
Compatible OneShot125 Signal FrequencyMinimum Value:30 Hz
Maximum Value:650 Hz
Compatible Regular Signal FrequencyMinimum Value:30 Hz
Maximum Value:500 Hz
Operating TemperatureMinimum Value:-10 ℃
Typical Value:25 ℃
Maximum Value:40 ℃
Typical Working Conditions*The following data is measured at a temperature of 25°C and a voltage of 22.2V
The Z650 is mainly designed for racing drones and small-size aerial drones.
All Takyon Series ESCs support throttle range settings via DJI Assistant 2. For more information, please refer to corresponding product user manual.
Launch DJI Assistant 2, then enter Settings and select “3D” in Throttle Range Settings.
The Z650 uses power devices with lower internal resistance to reduce the heat source. Besides that, it also uses a double-sided heat dissipation package in addition to the outer shell, enabling lower heat resistance and more efficient heat dissipation.
No. The Z650 comes with a crystal oscillator for accurate control and quick responses.
The Z650 is compatible with most motors used on racing drones and small-size aerial drones, including but not limited to 1306, 1804, 1806, 2216, 2312, 3510, 3515,3520, 4010, 4114, 4216, 5010, 6215, etc.