Zenmuse Z15-GH4 (HD)

Extremely Steady
Continuing Our Commitment To Ultra Stable Video Footage

Zenmuse Z15-GH4 (HD)


Built-In Functions
  1. Three Modes
    · Orientation-locked
    · Non orientation-locked
    · FPV mode (Reset)
  2. Built-in independent IMU module
  3. DJI-designed servo drives
  4. HDMI HD/AV module
  5. Wireless video transmission module support
  6. Camera shutter control support
  7. Wide range voltage input support
  8. S-Bus/PPM Receiver support

Mechanical& Electrical Characteristics

Working CurrentStatic current: 200mA (@25V)

Dynamic current: 400mA (@25V)

Locked-rotor current: 4A (@25V)
Operating Temperature-10°C ~ 50°C
GCU Weight63g
GCU Dimensions64.2 mm ×34.1mm ×19.5mm


Supported CameraPanasonic GH4/GH3
Supported Lens CurrentlyOLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0
GCU Input Power4S~12S LiPo (Recommend 6S if used with the S800 EVO or S1000)
Control RequirementMinimum of four spare receiver channels
Assistant Software System RequirementWindows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

Working Performance

Load Weight (Reference Value)690g(@Panasonic GH4 with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0, Battery and SD Card)
Controlled Angle Accuracy±0.01°
Maximum Controlled Rotation SpeedPan axis: ±130°/s

Tilt axis: ±130°/s

Roll axis: ±30°/s
RotationPan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°
DJI Zenmuse Z15-GH4 (HD) Assembly and Installation
DJI Zenmuse Z15-GH4 (HD) Assembly and Installation
DJI - Majestic New Zealand
DJI - Majestic New Zealand


  • Zenmuse Z15-GH4 (HD) Release Notes
  • Zenmuse Z15-GH4 (HD) User Manual v1.6
  • Zenmuse Assistant Software v1.4 (Stop distributing and updating)


  • DJI WIN Driver Installer
  • * Important Note:
    As DJI Innovations has no control over use, setup, final assembly, modification (including use of non-specified DJI parts or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.

    We will stop distributing and updating "Zenmuse Assistant Software v1.4"on May 15, 2018, including adaptations to the new version of the operating system. After May 15, 2018, the software is still ava

Keep your camera level however you fly