The DJI Zenmuse Z3 is an integrated aerial zoom camera based on DJI’s class leading Zenmuse X3 and optimized for still photography. A 7x zoom made up of 3.5x optical and 2x digital lossless zoom creates a 22mm to 77mm equivalent focal length range, making it ideal for industrial applications.
22-77mm Equivalent Focal Length
7X Zoom
No Zoom
7X Zoom
When a camera is zoomed in the smallest movements are magnified. Adding an additional layer of stability to the yaw control of the Z3 is a custom designed reaction wheel. This works in tandem with the normal yaw motor to allow for more refined movement.
Featuring the same highly refined Sony 1/2.3 inch sensor found on the DJI Inspire 1 2.0 and DJI Phantom 4, image quality is class leading. Still images can be captured at a resolution of 12 megapixels, while Adobe DNG RAW support allows for advanced image editing. Video can be captured at up to 30 frames per second in crisp 4K.
1/2.3"Sensor
4k/30FPS
12Megapixels
The ability to zoom in the air creates many new opportunities to streamline and enhance industrial and commercial drone use, from power line inspection to search and rescue. It also provides aerial photographers with greater control over composition.
Flying with the Zenmuse Z3 is as simple as attaching it to
the DJI Inspire 1, Matrice 100 or Matrice 600. Once connected, it works
seamlessly with the integrated DJI Lightbridge and Lightbridge 2 found on these
platforms to provide 3.1mi (5km) of HD transmission range. Aircraft setup can be
further accelerated using the DJI SDK to create industry specific aircraft
automation protocols that maximize aircraft efficiency.
Flight times when used with a DJI Inspire 1 reach up to 19 minutes, and can even reach 30 minutes when flying a dual-battery equipped
Matrice 100 and 39 minutes using the Matrice 600. Longer flight times maximize
airtime, increasing the efficiency of industrial and commercial projects while
providing photographers with additional time to wait for the right light,
compose and capture the perfect shot.
19 mins
39 mins
30 mins
All flight times vary based on payload and flight conditions.
Maximum flight times are tested with maximum capacity batteries and no additional payload.
DJI’s GO app is tightly integrated with the Z3, acting as both a live feed to see the camera’s image and the primary control system for the camera. It can be used to change camera settings, swipe to zoom in and out, capture photo or video, and activate Intelligent Flight Modes. Photo and video capture as well as zoom can also be controlled through dedicated controls on the Remote Controller.