Master Wheels

Voltage22.8 V
Battery4280 mAh/97.58Wh
Operating Temperature-20° to 50℃(-4° to 122℉)
Charging Temperature5° to 45℃(41° to 113℉)
Battery Life18 hours
Charging Time 1.5 hours
DC IN12 V - 27 V
DC OUT 14.4 V / 8A Max

Others

Guaranteed software updates until2026/12/31

INTRO

Introducing DJI Master Wheels
Introducing DJI Master Wheels
2018-04-09

Tutorials

DJI Tutorials - Master Wheels - Quick Overview
DJI Tutorials - Master Wheels - Quick Overview
2018-05-28
Each wheel control module has its own set of dials to control speed, smoothness, and damping. Turn the damping knob to increase or decrease damping for that particular wheel module.
If the signal is weak due to strong interference, a wired connection is recommended. If the signal is weak due to physical obstructions (e.g., wall, radio module, electrical cable), it is recommended to place the radio module on the opposite side of the obstacle.
Each wheel control module has its own three-stop toggle switch to control gimbal direction. Flip the switch to either end to set forward and backward direction, and to the middle for no movement at all.
30 meters.
18 hours (when the battery is fully charged and supplies energy to Master Wheels only).
Unfold the Wheels menu, tap Custom and enter the Channel interface to map CH1, CH2, and CH3.
After detaching the control wheel, use the Allen wrench to remove the four screws of the control module to detach it.
Master Wheels’ main interface displays the current speed and smoothness of each axis.
Decrease Dead Band and Smoothness.
Users can detach the three Master Wheels control modules and mount them at different places to accommodate the space where it is used. Users just need cables to connect a removed module to the base.
Yes. Master Wheels can be powered through the DC IN port.
Buy DJI Master Wheels

Classic Control, Reimagined