Soporte para DJI RS 3 Pro

Puerto para accesoriosPuertos RSA/NATO
Orificio de montaje de 1/4"-20
Zapata
Puerto de transmisión de vídeo/telémetro LiDAR (USB-C)
Puerto de control de cámara RSS (USB-C)
Puerto de motor Focus (USB-C)

BateríaModelo: BG30-1950 mAh-15.4 V
Tipo: LiPo 4S
Capacidad: 1950 mAh
Energía: 30 Wh
Tiempo de funcionamiento máx.: 12 horas^[1]
Tiempo de carga: aprox. 1.5 horas (usando un cargador de 24 W; se recomienda usar cargadores QC 2.0 o con protocolo PD)
Temperatura de carga recomendada: de 5 a 40 °C (de 41 a 104 °F)

ConexionesBluetooth 5.0
Puerto de carga (USB-C)

Requisitos de la aplicación RoniniOS 11 o superior
Android 7.0 o superior

Idiomas admitidos por la pantalla táctilInglés, chino simplificado, chino tradicional, alemán, francés, coreano, japonés, español, portugués (Brasil), ruso, tailandés

Rendimiento

Carga probada4.5 kg (10 libras)

Velocidad máx. de rotación controladaGiro: 360°
Inclinación: 360°/s
Rotación: 360°/s

Rango mecánicoEje de giro: rotación continua de 360°
Eje de rotación: de −95° a +240°
Eje de inclinación: de −112° a +214°

Propiedades mecánicas y eléctricas

Frecuencia de funcionamiento2.400-2.4835 GHz

Potencia de transmisión de Bluetooth<8 dBm

Temperatura de funcionamientoDe −20 a 45 °C (de −4 a 113 °F)

PesoEstabilizador: aprox. 1143 g
Empuñadura: aprox. 265 g
Empuñadura secundaria/trípode (metal): aprox. 226 g
Placas de liberación rápida inferior y superior: aprox. 107 g

Dimensiones del estabilizadorPlegado: 268 × 276 × 68 mm (la. × an. × al., excluidas cámara, empuñadura y empuñadura secundaria/trípode)
Desplegado: 415 × 218 × 195 mm (la. × an. × al., la altura incluye la empuñadura y excluye la empuñadura secundaria/trípode)

Transmisor de imagen DJI Ronin

ConexionesPuerto de alimentación/comunicación (USB-C)
Puerto HDMI (mini HDMI)
Puerto de control de cámara RSS (USB-C)

Puerto de expansiónZapata

Frecuencia de funcionamiento2.400-2.4835 GHz
5.725-5.850 GHz

Peso126 g

DimensionesLongitud: 82 × 63 × 24 mm (la. × an. × al.)

Potencia del transmisor (PIRE)2.400-2.484 GHz
<25 dBm (FCC)
<20 dBm (CE/SRRC/MIC)

5.725-5.850 GHz:
<25 dBm (FCC/SRRC)
<14 dBm (CE)

BateríaCapacidad: 2970 mAh
Cargador compatible: 5 V/2 A
Tiempo de carga: aprox. 2.5 h
Tiempo de funcionamiento: aprox. 3.5 h

Alcance de transmisión200 m (SRRC/FCC)^[2]
100 m (CE)^[2]

Latencia60 ms

Corriente de funcionamiento900 mA/3.7 V

Temperatura de funcionamientoDe 0 a 45 °C (de 32 a 113 °F)

Telémetro LiDAR (RS) DJI

Puerto para accesoriosZapata
Orificio de montaje de 1/4"-20
Puerto USB-C
Puerto USB-C de alimentación/CVBS/datos CAN

Sensor de imagenResolución: 448×298 en la pantalla táctil del RS
FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)
Tasa de fotogramas: 30 fps
Distancia focal: equivalente a 30 mm

Sensor ToFResolución: 240×180
Alcance de detección: de 0.5 a 14 m^[3]
FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)
Frecuencia: 25 Hz
Distancia focal: equivalente a 30 mm
Error de distancia: 1 %

Aprendizaje automáticoFrecuencia: 30 Hz
Seguir a objetivos: puede reconocer hasta cinco objetivos al mismo tiempo y elegir uno al que seguir.
Identificación inteligente de objetos: cara, cabeza y cuerpo de personas

Propiedades eléctricasConsumo eléctrico: 6.8 W
Entrada: de 7 a 16 V

Temperatura de funcionamientoDe −20 a 45 °C (de −4 a 113 °F)

Propiedades mecánicasDimensiones: 66 × 57 × 24 mm (la. × an. × al.)
Peso: aprox. 130 g
Altura de la placa de montaje: 30 mm

Objetivos que no requieren calibraciónDZOFILM Vespid Cyber 35 mm
DZOFILM Vespid Cyber 50 mm
DZOFILM Vespid Cyber 75 mm

Notas

1. Medido con el equipo nivelado y parado, el estabilizador equilibrado, tres ejes en un estado activo y la batería alimentando solo el estabilizador.
2. En entornos abiertos y sin obstáculos o interferencias.
3. En entornos con un nivel de brillo de 80 000 lux o menos.

Los términos HDMI, HDMI High-Definition Multimedia Interface (Interfaz multimedia de alta definición), HDMI Trade Dress (diseño e imagen comercial HDMI) y los logotipos HDMI son marcas comerciales o marcas registradas de HDMI Licensing Administrator, Inc.

FAQ

Intelligent Features

Gimbal

Camera Control

Accessories

Battery

Intelligent Features

How do I enable SuperSmooth mode on DJI RS 3 Pro?

Tap the gimbal calibration icon on the touchscreen of the gimbal and enable SuperSmooth mode*. Tap Start Calibration to perform calibration for better stabilization.

^{* Before using SuperSmooth mode, make sure you have installed the lens-
fastening support.}

What are the differences between SuperSmooth and the normal stabilization of DJI RS 3 Pro?

SuperSmooth mode was developed for fast-moving scenarios. It increases the torque of DJI RS 3 Pro to further enhance stabilization, delivering stable footage in more dynamic and strenuous shooting scenarios.

How many subjects can DJI RS 3 Pro follow using ActiveTrack?

One.

When using ActiveTrack on DJI RS 3 Pro, how do I adjust composition?

You can use the joystick on the grip to control the gimbal and compose your shot.

Gimbal

What are the differences between DJI RS 3 Pro and DJI RS 2?

Inheriting the design language of DJI RS 2, DJI RS 3 Pro features extended carbon fiber axis arms, new automated axis locks, a gimbal mode switch, Bluetooth shutter control, as well as a 1.8-inch full-color OLED touchscreen, making shooting more efficient and convenient. The optimized structure of RS 3 Pro ensures that its weight remains at 1.5 kg (this weight includes the gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a robust 4.5 kg. In addition, DJI RS 3 Pro is equipped with the 3rd-Gen RS Stabilization Algorithm that supports LiDAR focusing and O3 Pro video transmission technologies, delivering an integrated receiving, monitoring, and control experience that facilitates coordinated shooting.

How do I activate DJI RS 3 Pro?

Follow the steps below to activate the device:
1. Press and hold the power button to power on the gimbal.
2. Enable Bluetooth on your mobile device.
3. Launch the Ronin app and register or log in with your DJI account. Select DJI RS 3 Pro on the device list, enter the default password: 12345678, and follow the on-screen instructions to activate DJI RS 3 Pro.*
4. DJI RS 3 Pro will enter sleep mode after successful activation. Press the power button once to exit sleep mode before use.

^{* During activation, make sure the mobile device is connected to the internet.}

How do I update the firmware of DJI RS 3 Pro?

Follow the steps below to update the firmware:
1. Press and hold the power button to power on the gimbal.
2. Launch the Ronin app, tap Connect to Gimbal, and select your DJI RS 3 Pro on the device list.
3. When new firmware is available, there will be a prompt on the top of the Ronin app main page that says "Update Now."* Simply tap it. There will be a prompt to indicate that the update has been successful. Tap Exit to complete the update.
4. If the update fails, restart the device and try again.

^{* Do not power off the gimbal or exit the app until the firmware update is complete.}

Is DJI RS 3 Pro waterproof?

No. Ports on DJI RS 3 Pro are not waterproof or dustproof. Please stay away from water and dust during use to avoid damaging the device.

What material is DJI RS 3 Pro made of?

DJI RS 3 Pro is primarily composed of aluminum alloy and carbon fiber.

Which cameras and lenses are supported by DJI RS 3 Pro?

Please refer to the Ronin Series Compatibility Search: https://www.dji.com/support/compatibility.

Does DJI RS 3 Pro have any key shortcuts?

1. Power Button
Press and hold: Power on/off;
Press once: Sleep/wake.
2. Trigger
Press and hold: Enter Lock mode;
Press twice: Recenter the gimbal;
Press three times: Enter Selfie mode.
3. Front Dial
Electronic focusing (default setting).
4. Camera Control Button
Press halfway: Autofocus;
Press once: Start/stop recording;
Press and hold: Take a photo.
5. Joystick
Push up or pull down: Control tilt axis movement (by default);
Push left or right: Control pan axis movement (by default).
6. M Button
Press once: Can be customized to lock/unlock the touchscreen, take a photo, or LiDAR AF/MF;
Press and hold: Enter Sport mode;
Press and hold while pressing the Trigger twice: Lock Sport mode. Repeat to exit;
Press and hold the M Button and Trigger: Start auto calibration.

How do I use the automated axis locks on DJI RS 3 Pro?

When the gimbal is powered off, press and hold the power button, and the three axes unlock and expand automatically for use within just a few seconds. Press and hold the power button again to lock the axes and power off the gimbal. During use, press the power button once, and the axes automatically lock and enter sleep mode. Press once again to unlock and wake.

How do I enable different gimbal modes for DJI RS 3 Pro?

With the new gimbal mode switch, you can quickly change between Pan Follow, Pan and Tilt Follow, and FPV modes. The FPV switch is also customizable to 3D Roll 360, Portrait, or Custom.

What is the max tested payload supported by DJI RS 3 Pro?

Approx. 4.5 kg/10 lbs.

Camera Control

What cameras can be controlled by the Bluetooth shutter of DJI RS 3 Pro?

Please refer to the Ronin Series Compatibility Search: https://www.dji.com/support/compatibility.

How do I enable Bluetooth shutter control on DJI RS 3 Pro?

Swipe down the main page of the built-in touchscreen, tap the Bluetooth icon, and DJI RS 3 Pro will start searching for Bluetooth signals of surrounding devices. Select the Bluetooth name of your camera. Certain camera models require a linking password. After successful connection, the Bluetooth icon will turn blue. For detailed steps, watch the tutorial Connecting DJI RS 3/RS 3 Pro.

What functions can be controlled by Bluetooth shutter on DJI RS 3 Pro ?

Press halfway to autofocus, press once to start recording, and press and hold to take a photo.

Accessories

What accessories can be used interchangeably among DJI RS 3 Pro, DJI RS 3, DJI RS 2, and DJI RSC 2?

Please check the appendix: DJI RS Series Universal Accessories List.

How do I mount DJI RS 3 Pro on a car, jib, or third-party slider?

Use the Ronin Expansion Base Kit to mount DJI RS 3 Pro.

How do I control DJI RS 3 Pro remotely?

There are three ways to control DJI RS 3 Pro remotely:
1. Pair DJI RS 3 Pro with DJI Transmission to control the gimbal and camera focus remotely with Ronin 4D Hand Grips, DJI Master Wheels, or DJI Force Pro. The DJI High-Bright Remote Monitor can be used as an independent motion controller to remotely control the gimbal.
2. Connect DJI RS 3 Pro to the DJI R Focus Wheel and DJI Pro Wireless Receiver. Link the DJI Pro Wireless Receiver with DJI Master Wheels or DJI Force Pro to remotely control the gimbal via DJI Master Wheels or DJI Force Pro.
3. When using DJI RS 3 Pro with the DJI Ronin Image Transmitter, use Force Mobile or the virtual joysticks in the Ronin app to control the gimbal remotely.

Where are calibration profiles of manual lenses stored? Can I delete them?

Lens calibration profiles are stored in the DJI RS Focus Motor (2022). After connecting the DJI LiDAR Range Finder (RS) and DJI RS Focus Motor (2022) to the gimbal, you can delete the files on the lens calibration page on the built-in touchscreen.

How many calibration profiles can be stored?

Three at most.

How do I update the firmware of the DJI LiDAR Range Finder (RS)?

1. Use a USB-C cable to connect the DJI LiDAR Range Finder (RS) with a computer. Launch DJI Assistant 2 (Ronin Series), and log into your DJI account.
2. Click on the LiDAR range finder icon to enter the firmware update page, and wait for the firmware list to be updated.
3. Select the firmware version you need and click Update. Then, wait for the firmware to be downloaded. After the download, the DJI LiDAR Range Finder (RS) will automatically perform the update.

Can the DJI LiDAR Range Finder (RS) be used with autofocus lenses?

No. It can only work with manual lenses.

When do I need to use the DJI LiDAR Control Cable?

When the DJI LiDAR Range Finder (RS) is connected to DJI RS 3 Pro via the multi-camera control cable, if the display becomes grainy or flickers, use the DJI LiDAR Control Cable to connect the DJI LiDAR Range Finder (RS) with DJI RS 3 Pro.

Battery

How long is the runtime of the DJI RS 3 Pro battery grip?

Up to 12 hours with equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.

How long does it take to fully charge the DJI RS 3 Pro battery grip?

Approx. 1.5 hours.*

^{* Measured with a 24W charger. It is recommended to use QC 2.0 or PD protocol chargers.}

Can DJI RS 3 Pro be used while charging?

Yes.

Are the battery grips of DJI RS 3 Pro, DJI RS 3, and DJI RS 2 interchangeable?

The battery grip of DJI RS 3 Pro is not interchangeable with that of DJI RS 3, but it is interchangeable with DJI RS 2.

Buscar más información

Contacta con nosotros

Servicio de atención al cliente en línea

Lun-Vie: 9:00 a 18:00 (CET/CEST)

Contacta con el servicio de atención al cliente en línea

Servicio de asistencia (Inglés)

Europa (Inglés): +31 20 654 5202
Lun-Dom 9:00 a 21:00 (CET/CEST)

Más soportes telefónicos