E2000

E2000

tuned propulsion system

The E2000 is DJI’s first tuned propulsion system specially engineered for industrial applications and aerial imagery. Using a combination of 6010 motors, 1240S/X ESCs, and R2170 propellers, the E2000 is designed to carry payloads of 1800–2500g per axis, giving it the power to carry substantial add-ons and advanced imaging equipment.

E2000 Pro

SPECIFICATIONS

Max Thrust5100 g/rotor (50 V, Sea Level)
Recommended Battery12S LiPo
Recommended Takeoff Weight1800 - 2500 g/rotor (Sea Level)
Powertrain Cable Length750 mm
Compatible Arm Tube Outer Diameter28 mm
Powertrain Weight (Single)430 g
Operating Temperature-10° to 50° C

MOTOR

Stator Size60×10 mm
KV130 rpm/V
Weight230 g

ESC

Max Allowable Voltage52.2 V
Max Allowable Current (Persistent)25 A
Max Peak Current (3 sec)40 A
PWM Input Signal Level3.3 V / 5 V Compatible
Operating Pulse Width1120 to 1920 μs
Signal Frequency30 to 450 Hz
Battery12S LiPo

PROPELLER

Diameter / Thread Pitch21 x 7.0 inch (533 x 178 mm)
Weight (single propeller)58 g

E2000 Standard

SPECIFICATIONS

Max Thrust5100 g/rotor (50 V, Sea Level)
Recommended Battery12S LiPo
Recommended Takeoff Weight1800 - 2500 g/rotor (Sea Level)
Operating Temperature-10° to 50° C

Motor

Stator Size60 x 10 mm
KV130 rpm/V
Weight230 g

ESC

Max Allowable Voltage52.2 V
Max Allowable Current (Continuous)25 A
Max Peak Current (3 sec)40 A
PWM Input Signal Level3.3 V / 5 V Compatible
Operating Pulse Width1120 to 1920 μs
Signal Frequency30 to 450 Hz
Battery12S LiPo
Dimensions85 mm x 44 mm x 18 mm
Cable Length750 mm
Weight (without cables)55 g
Weight (with cables)90 g

Propeller

Diameter / Thread Pitch21 x 7.0 inch (533 x 178 mm)
Weight (single propeller)58 g

E2000 Propulsion System Performance 

e2000

The data above was measured with an input voltage of 44.4 V, at room temperature and sea level. The thrust was adjusted by the throttle. 

e2000

η – Motor Efficiency, T – Thrust, I – Current, P – Input Power
The data above was measured with an input voltage of 44.4 V, at room temperature and sea level. The rotational speed was adjusted by the throttle.

6010 Motor Performance 

e2000

The data above was measured at full throttle, at room temperature and sea level.

e2000

η – Efficiency, Τ– Torque, I – Current, P – Output Power
The data above was measured with an input voltage of 44.4 V and 100% duty cycle, at room temperature and sea level. The rotational speed was adjusted by the payload torque. 

Documents & Manuals

  • E2000 Standard User Manual v1.4
    2016-12-20
  • E2000 Pro User Manual v1.4
    2016-12-20

software

  • ESC Assistant v1.6 (Stop distributing and updating)
    2016-06-29
FAQ
Weather-proof and capable of supporting large, heavy-load frames, the E2000 is designed for industrial applications in agriculture, search and rescue, mapping, inspection and more.
Note:The E2000 is not compatible with the Phantom series, Inspire 1, F450/F550 or Matrice 100 platforms.
No. The diagonal wheelbase on the S1000 or S900 is not long enough to mount the 21-inch propeller. You can upgrade your S900 with the E1200.
No. Although the propulsion system on the Agras MG-1 shares the same core design with the E2000, neither the E2000 Pro nor the E2000 Standard is compatible with the Agras MG-1. Only use parts specifically designed for the Agras MG-1 to maintain or repair the aircraft.
The A2 and Wookong flight controllers are compatible with the E2000. But due to the 12S power supply on the E2000, the Flight Controller will need to be powered separately.
No, the operating temperature range is -10 to 50°C.
You can operate the E2000 Standard in humid coastal areas. The system has gone through a third-party salt spray test according to national standards and proved excellent corrosion resistance for a remarkable 120 hours.
We do not recommend using the E2000 Pro in humid coastal areas.
Although the 6010 Pro motors have the same protection as the Standard motors, the ESC board on the E2000 Pro has not been specially treated. This means the system as a whole can only withstand light rain.
The E2000 Pro is highly integrated and designed for professional aerial imaging, whereas the E2000 Standard is a better choice for users requiring strong weather-proofing.
The E2000 Pro’s arm tube has a tolerance range of Ø280-0.10 mm.