FAQ

Max Ascent Speed 6m/s (Sport Mode);
Max Descent Speed: Vertical, 13.1 ft/s (4 m/s); Tilt, 13.1-29.5 ft/s (4-9 m/s)
Default tilt is 13.1 ft/s (4 m/s), can be set in-app.
Max Speed 26m/s, 58 mph (94 kph, flight forward in S-mode).

Up to 25 minutes with Zenmuse X5S. Up to 27 minutes with Zenmuse X4S.

The Inspire 2 currently supports the Zenmuse X4S, Zenmuse X5S and Zenmuse X7.

No. Please purchase your gimbal and camera separately.

Yes. Its Forward Vision System is capable of detecting obstacles up to 30 meters ahead, while the upward facing infrared sensors can sense obstacles within a 5 meter range.

No. You will need to use an Inspire 2 remote with your Inspire 2 aircraft.

Yes. The maximum effective distance between the Master and Slave controllers is 100 meters, and both controllers will receive the same HD live view.

Currently, only the new Zenmuse X4S and Zenmuse X5S are supported.

Yes. Included in the box is a 16GB Micro SD card. It supports SD cards up to 128GB.

Currently supported Micro SD cards are:
Sandisk Extreme 32GB UHS-3 V30 MicroSDHC;
Sandisk Extreme 64GB UHS-3 V30 MicroSDXC;
Panasonic 32GB UHS-3 MicroSDHC;
Panasonic 64GB UHS-3 MicroSDXC;
Samsung PRO 32GB UHS-1 MicroSDHC;
Samsung PRO 64GB UHS-3 MicroSDXC;
Samsung PRO 128GB UHS-3 MicroSDXC;
*It's not recommend to use the Patriot EPPRO 64GB MicroSDXC UHS-3.

L:42.7cm x H:31.7cm x W:42.5cm without propellers (landing mode).

The Inspire 2 has 3512 motors and 1550T propellers.

No, please purchase the Highland propellers separately.

Yes. The Inspire 2 uses 3512 motors and 1550T propellers. The max thrust for each rotor reaches up to 2kg.
Thousands of hours have been spent on testing to ensure top safety and reliability.

The Inspire 2 Intelligent Flight Battery has a capacity 97.5Wh. Most airlines allow carrying
batteries below 100 Wh in carry-on luggage. However, as regulations may vary across airlines and regions, please contact your airline or the regulatory body of your destination.

The new dual-band Lightbridge HD video transmission system has a maximum transmission distance of 7 km*.
The video feed from the FPV camera and main camera (1080p or 720p) can be viewed simultaneously through the
Picture in View feature. The dual-band system consists of 2.4GHz ISM and 5.8GHz ISM**, giving the Inspire 2 stronger
resistance against interference.
*Unobscured, free of interference, FCC compliant.
**In accordance with local law and regulations, 5.8GHz is not available in some countries.

The remote controller is equipped with a 6,000mAh LiPo 2S battery. Fully charging the Inspire 2 remote controller takes approximately 3 hours.
It can be used for approximately 4 hours after being fully charged.

The mount can support an iPad Air or other similar-sized tablet. Tablets should be no more than 170mm tall.

Open the DJI GO 4 app, click the remote controller icon and enter to Settings.
You can choose MODE1, MODE2, MODE3, Custom and more under Stick Mode.

No. The remote controller has a mobile device holder for smartphones and tablets. You can also buy the DJI CrystalSky monitor.

The distance here refers to environments free of obstructions and interference, under FCC compliant specifications.

The Master and Slave remote controllers can maintain a connection at distances up to 100 meters.

There is no training port on the Inspire 2 remote controller.

Below 220ms.

You will get a 180W Battery Charger and a Battery Charging Hub in the box with your Inspire 2.
When connecting the standard Battery Charger to the Battery Charging Hub, it takes about 90 minutes
to charge 2 batteries and 180 minutes to charge 4 batteries.

The Inspire 2 can take off if the power discrepancy of the two batteries is within 13%. If it is unable to take off,
the DJI GO 4 app will inform you that “the power discrepancy in the two batteries is too large”.

The Inspire 2 continuously checks battery status and will notify you through the DJI GO 4 app if a battery malfunctions.
In this case, please land the aircraft immediately.

By charging and discharging a pair of batteries together you will maximize flight time and battery life.

Please match batteries on the battery interface of DJI GO 4 app.

You will hear the Exit button click to confirm successful mounting of each battery.
Other signs is that the button will have less give when you tap it, and that the batteries will not detach when pulled.
The DJI GO 4 app also will not inform you of errors and show a full status for each battery when properly mounted.

It is recommended that you keep the Intelligent Flight Batteries charged to 50% when storing them.
If storing for a long period of time, we also recommend that you fully discharge them every 3 months.

No, you will need to purchase a DJI License Key to enable these formats.

No.

640 x 480px.

Yes. Press and hold the C2 button, and at the same time use the left dial to control the pitch. The roll axis is not controllable.

No. You need to purchase the DJI CINESSD and DJI CINESSD Station card reader separately.

120GB , 240GB and 480GB.

Yes. Many key parts of the Inspire 2 are designed with redundancy, including IMU sensors and barometers.
The Inspire 2 flight controller monitors and analyses the redundancy data in real time, to ensure that flight data is correct.

Yes. During RTH, the Inspire 2 is able to collect information about the environment and automatically plan the best path back home.
Being able to detect obstacles 200m away, it also restores communication faster with the remote controller during RTH after losing signal,
so as to make RTH safe and successful.

To use ActiveTrack, you should keep your Inspire 2 at least 2m above the ground and set the aircraft to P-Mode.