- Product
Compared with DJI Mini 4K, what are the main improvements of DJI Lito 1?
DJI Lito 1 has comprehensive improvements in the camera system, vision sensing system, flight performance, and video transmission system. The main improvements include:
1. Camera System: DJI Lito 1 features a 1/2-inch CMOS sensor and a new image processing platform. Paired with an f/1.8 aperture, it provides enhanced dynamic range. The drone supports recording up to 4K/60fps videos, up to 4K/100fps slow-motion videos, and 2.7K vertical videos. It also supports smart recording modes, such as MasterShots, QuickShots, and Hyperlapse, to make content creation easier.
2. Sensing System: With the new omnidirectional obstacle sensing feature [1], DJI Lito 1 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence. Additionally, on surfaces with discernible textures and in well-lit environments, the drone can memorize flight routes, allowing for quick takeoff and safe return even without satellite signals [1].
3. ActiveTrack [2]: DJI Lito 1 supports ActiveTrack. Tracking performance has been enhanced to balance speed, agility, and safety.
4. Flight Performance [3]: The Intelligent Flight Battery offers up to 36 minutes of flight time and a maximum takeoff altitude of 4500 meters.
5. Video Transmission: DJI O4 Video Transmission offers up to 15 km of 10-bit video transmission [4], with stronger signal stability, enhanced anti-interference capabilities, and superior image quality.
6. QuickTransfer: DJI Lito 1 supports remote wake-up via the DJI Fly app within Bluetooth range, enabling high-speed file transfers at up to 50MB/s [5].
7. Battery Charging Efficiency [6]: Using the DJI 65W Portable Charger and charging via the Charging Hub, it takes approximately 45 minutes to fully charge a single Intelligent Flight Battery. Fully charging three Intelligent Flight Batteries takes about 87 minutes in total.1. Omnidirectional obstacle sensing is only effective on surfaces with discernible textures and in lighting conditions exceeding 5 lux. Flight route memorization requires discernible textures and over 10 lux illumination. Refer to the product page on the official DJI website or the product's user manual for details.
2. ActiveTrack can work properly only when certain flight conditions are met. Refer to the product page on the official DJI website or the product's user manual for details.
3. The flight time was measured in laboratory conditions, while the maximum takeoff altitude was measured in a high-altitude environment. Refer to the Spec page on the official DJI website for details.
4. Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.
5. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.
6. Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.What is the certification level of DJI Lito 1 in Europe?
DJI Lito 1 is compliant with EASA C0 and UK0 class requirements.How do I activate DJI Lito 1?
With DJI RC-N3 Remote Controller:
Connect your mobile device (connected to the internet) with the remote controller, and then connect to DJI Lito 1 via the DJI Fly app. Follow the instructions in the app to activate DJI Lito 1.
With DJI RC 2:
When using DJI RC 2 for the first time, connect to the internet via Wi-Fi or a smartphone hotspot, and then follow the instructions in the DJI Fly app to activate the device. After activating DJI RC 2, connect it with DJI Lito 1 via the DJI Fly app, and then follow the instructions in the app to activate the aircraft.Is DJI Lito 1 waterproof?
No. Avoid contact with water during use, as it may damage the device.
If it rains during the flight, return and land as soon as possible, and wait until the drone is fully dry inside and out before using it again.What app do I need to install before using DJI Lito 1?
DJI Lito 1 can only be used with the DJI Fly app. You can download the latest version of DJI Fly from the DJI Lito 1 Downloads page on the official DJI website.If you use DJI RC 2 as the remote controller, it comes with the pre-installed DJI Fly app.
Compared with DJI Mini 4K, what are the main improvements of DJI Lito 1?
DJI Lito 1 has comprehensive improvements in the camera system, vision sensing system, flight performance, and video transmission system. The main improvements include:
1. Camera System: DJI Lito 1 features a 1/2-inch CMOS sensor and a new image processing platform. Paired with an f/1.8 aperture, it provides enhanced dynamic range. The drone supports recording up to 4K/60fps videos, up to 4K/100fps slow-motion videos, and 2.7K vertical videos. It also supports smart recording modes, such as MasterShots, QuickShots, and Hyperlapse, to make content creation easier.
2. Sensing System: With the new omnidirectional obstacle sensing feature [1], DJI Lito 1 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence. Additionally, on surfaces with discernible textures and in well-lit environments, the drone can memorize flight routes, allowing for quick takeoff and safe return even without satellite signals [1].
3. ActiveTrack [2]: DJI Lito 1 supports ActiveTrack. Tracking performance has been enhanced to balance speed, agility, and safety.
4. Flight Performance [3]: The Intelligent Flight Battery offers up to 36 minutes of flight time and a maximum takeoff altitude of 4500 meters.
5. Video Transmission: DJI O4 Video Transmission offers up to 15 km of 10-bit video transmission [4], with stronger signal stability, enhanced anti-interference capabilities, and superior image quality.
6. QuickTransfer: DJI Lito 1 supports remote wake-up via the DJI Fly app within Bluetooth range, enabling high-speed file transfers at up to 50MB/s [5].
7. Battery Charging Efficiency [6]: Using the DJI 65W Portable Charger and charging via the Charging Hub, it takes approximately 45 minutes to fully charge a single Intelligent Flight Battery. Fully charging three Intelligent Flight Batteries takes about 87 minutes in total.1. Omnidirectional obstacle sensing is only effective on surfaces with discernible textures and in lighting conditions exceeding 5 lux. Flight route memorization requires discernible textures and over 10 lux illumination. Refer to the product page on the official DJI website or the product's user manual for details.
2. ActiveTrack can work properly only when certain flight conditions are met. Refer to the product page on the official DJI website or the product's user manual for details.
3. The flight time was measured in laboratory conditions, while the maximum takeoff altitude was measured in a high-altitude environment. Refer to the Spec page on the official DJI website for details.
4. Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.
5. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.
6. Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.What is the certification level of DJI Lito 1 in Europe?
DJI Lito 1 is compliant with EASA C0 and UK0 class requirements.How do I activate DJI Lito 1?
With DJI RC-N3 Remote Controller:
Connect your mobile device (connected to the internet) with the remote controller, and then connect to DJI Lito 1 via the DJI Fly app. Follow the instructions in the app to activate DJI Lito 1.
With DJI RC 2:
When using DJI RC 2 for the first time, connect to the internet via Wi-Fi or a smartphone hotspot, and then follow the instructions in the DJI Fly app to activate the device. After activating DJI RC 2, connect it with DJI Lito 1 via the DJI Fly app, and then follow the instructions in the app to activate the aircraft.Is DJI Lito 1 waterproof?
No. Avoid contact with water during use, as it may damage the device.
If it rains during the flight, return and land as soon as possible, and wait until the drone is fully dry inside and out before using it again.What app do I need to install before using DJI Lito 1?
DJI Lito 1 can only be used with the DJI Fly app. You can download the latest version of DJI Fly from the DJI Lito 1 Downloads page on the official DJI website.If you use DJI RC 2 as the remote controller, it comes with the pre-installed DJI Fly app.
- Flight
Does DJI Lito 1 support obstacle sensing?
Yes. With the new omnidirectional obstacle sensing feature*, DJI Lito 1 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence.* Omnidirectional obstacle sensing is only effective on surfaces with discernible textures and in lighting conditions exceeding 5 lux. Refer to the product page on the official DJI website or the product's user manual for details.
Does DJI Lito 1 support obstacle sensing?
Yes. With the new omnidirectional obstacle sensing feature*, DJI Lito 1 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence.* Omnidirectional obstacle sensing is only effective on surfaces with discernible textures and in lighting conditions exceeding 5 lux. Refer to the product page on the official DJI website or the product's user manual for details.
- Remote Controller
What remote controllers are compatible with DJI Lito 1?
DJI RC-N3 Remote Controller and DJI RC 2.How do I adjust the antennas of the remote controller?
Keep the antennas facing the aircraft during flight for optimal transmission.What remote controllers are compatible with DJI Lito 1?
DJI RC-N3 Remote Controller and DJI RC 2.How do I adjust the antennas of the remote controller?
Keep the antennas facing the aircraft during flight for optimal transmission.
- Video Transmission
What is the video transmission range of DJI Lito 1?
When using the DJI RC 2 or DJI RC-N3 Remote Controller, the transmission range can reach up to 15 km*.* Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.
What is the video transmission range of DJI Lito 1?
When using the DJI RC 2 or DJI RC-N3 Remote Controller, the transmission range can reach up to 15 km*.* Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.
- Firmware Update
How do I update the firmware of DJI Lito 1?
When the drone is connected to the remote controller and a new firmware version is available, the DJI Fly app will send you a firmware update prompt. You can follow the instructions to update the firmware for the drone, remote controller, battery, and other devices.
You can also update via the DJI Assistant 2 (Consumer Drones Series) software on a computer. The latest version of the software can be downloaded from the DJI Lito 1 Downloads page on the official DJI website.What factors can lead to an update failure?
1. The battery level of the drone or remote controller is below 20%.
2. The drone or the remote controller is powered off during an update. If this happens, restart the drone and remote controller, and try again.
3. The network is disconnected during a firmware download.
4. Your smartphone interface is switched to other apps during a firmware download.
5. If the aircraft temperature is too high, the system will prompt that the update cannot proceed. Power off the aircraft, allow it to cool down, and move it to a shaded area before trying again.The drone will restart multiple times during an update and automatically power off after completing the update.
How do I update the firmware of DJI Lito 1?
When the drone is connected to the remote controller and a new firmware version is available, the DJI Fly app will send you a firmware update prompt. You can follow the instructions to update the firmware for the drone, remote controller, battery, and other devices.
You can also update via the DJI Assistant 2 (Consumer Drones Series) software on a computer. The latest version of the software can be downloaded from the DJI Lito 1 Downloads page on the official DJI website.What factors can lead to an update failure?
1. The battery level of the drone or remote controller is below 20%.
2. The drone or the remote controller is powered off during an update. If this happens, restart the drone and remote controller, and try again.
3. The network is disconnected during a firmware download.
4. Your smartphone interface is switched to other apps during a firmware download.
5. If the aircraft temperature is too high, the system will prompt that the update cannot proceed. Power off the aircraft, allow it to cool down, and move it to a shaded area before trying again.The drone will restart multiple times during an update and automatically power off after completing the update.