Service client en ligne
Lun-Ven 9 h 00 à 18 h 00 (CET/CEST)
Service d'assistance téléphonique
Europe (Anglais): +31 20 654 5202Lun-Dim 9 h 00 à 21 h 00 (CET/CEST)
Besoin d’aide ? Contactez-nous !
Lun-Dim 9 h 00 à 21 h 00 (CET/CEST)
Caractéristiques techniques
Appareil
Structure
Empattement diagonal1133 mm
Dimensions de l"appareil
- 1668 mm x 1518 mm x 759 mm (hélices, bras, et GPS inclus)
- 640 mm x 582 mm x 423 mm (bras et GPS exclus)
Dimensions de l'emballage620 mm x 320 mm x 505 mm
Quantité de batteries de vol intelligentes6
Poids (avec six batteries TB47S)9.1 kg
Poids (avec six batteries TB48S)9.6 kg
Poids maximum au décollage15.1 kg
Performance
Précision de survol (P-Mode, avec GPS)Verticale : ±0.5 m, Horizontale : ±1.5 m
Vitesse angulaire maxAngle d'attaque : 300°/s, Lacet : 150°/s
Angle d'attaque max25°
Vitesse d'ascension max5 m/s
Vitesse de descente max sur 4 m3 m/s
Résistance au vent max8 m/s
Altitude de vol max au-dessus du niveau de la mer2500 m
Vitesse maximum18 m/s (sans vent)
Durée de vol stationnaire (avec six batteries TB47S)*A vide: 35 min, avec 6 kg de charge: 16 min
Durée de vol stationnaire (avec six batteries TB48S)*A vide: 40 min, avec 5,5 kg de charge: 18 min
* La durée du vol stationnaire est calculée à partir d'un vol à 10 m au-dessus du niveau de la mer, dans un environnement protégé du vent et après un atterrissage avec 10% de batterie restants.
* La durée du vol stationnaire est calculée à partir d'un vol à 10 m au-dessus du niveau de la mer, dans un environnement protégé du vent et après un atterrissage avec 10% de batterie restants.
Système de propulsion
Modèle du moteurDJI 6010
Modèle de l'héliceDJI 2170
Système de contrôle de vol
ModèleA3
Autres
Supports de fixation compatiblesSupports pour Zenmuse X3; la gamme Zenmuse X5; Zenmuse XT; Ronin-MX; la gamme Zenmuse Z15 HD : Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Train d'atterrissage rétractableStandard
Température de fonctionnementDe -10° à 40°C
Radiocommande
Fréquence de fonctionnement
- 920.6 MHz to 928 MHz (Japon)
- 5.725 GHz to 5.825 GHz
- 2.400 GHz to 2.483 GHz
Distance de transmission max (Sans obstacle ni interférence)
- Conforme aux normes de la FCC : 5 km
- Conforme aux normes européennes CE : 3.5 km
Puissance de l'émetteur (PIRE)
- 10 dBm @ 900 M/li>
- 13 dBm @ 5.8 G
- 20 dBm @ 2.4 G
Port de sortie vidéo HDMI, SDI, USB
Capacité double utilisateurGestion maître/esclave
Support pour appareil mobileFonctionne avec tablettes et téléphones
Puissance de sortie9 W
Température de fonctionnementDe -10° à 40°C
Température de stockage
- Moins de 3 mois : De -20° à 40°C
- Plus de 3 mois : De 22° à 40°C
Température en chargeDe 0° à 40°C
Batterie intégrée6000 mAh, 2S LiPo
Largeur de tablette max170 mm
Chargeur
ModèleA14-100P1A
Voltage de sortie26,3 V
Consommation électrique100 W
Batterie (Standard)
ModèleTB47S
Capacité4500 mAh
Voltage22.2 V
TypeLiPo 6S
Energie99,9 Wh
Poids Net595 g
Température de fonctionnementDe -10° à 40°C
Température de stockage
- Moins de 3 mois : De -20° à 40°C
- Plus de 3 mois : De 22° à 40°C
Température en chargede 5° à 40°C
Puissance de charge max180 W
Batterie (facultative)
ModèleTB48S
Capacité5700 mAh
Voltage22.8 V
TypeLiPo 6S
Energie129.96 Wh
Poids Net680 g
Température de fonctionnementDe -10° à 40°C
Température de stockage
- Moins de 3 mois : De -20° à 40°C
- Plus de 3 mois : De 22° à 40°C
Température en chargeDe 5° à 40°C
Puissance de charge max180 W
Remarques
Les termes HDMI, interface multimédia haute définition HDMI et habillage commercial HDMI, et les logos HDMI sont des marques commerciales et des marques déposées de HDMI Licensing Administrator, Inc.
FAQ
Product Application
Can the TB47S and TB48S be used simultaneously?
No.
Is the M600’s battery charging hub the same as Inspire 1’s? Can the M100 use M600 battery charging hub?
Yes, they’re same. M100 batteries can be charged with an M600 battery charging hub.
Can M600 only be used with an A3 flight controller? Can other flight controllers be used?
No, it should be used with an A3 flight controller.
Can the M600 only use Lightbridge2? Can Lightbridge be replaced with a third party remote controller, such as a Futaba?
No.
Must all six intelligent flight batteries be installed to takeoff?
All six batteries must be installed, or else the aircraft won’t take off. It is recommended to fully charge all intelligent flight batteries first before use.
Can executing the Combination Stick Command (pushing the sticks to the bottom inner or outer corners) stop the M600’s motors in an emergency?
No, newer DJI aircraft no longer use the traditional Combination Stick Command. To stop the motors, push the left control stick the bottom inner or outer corner and push the Return to Home button.
Does the M600 have dual video inputs?
Yes, it has an AV and HMDI port.
If the six intelligent flight batteries have different charge levels, can the aircraft takeoff?
If you turn on one battery, and the other five batteries don't turn on, the aircraft won't be able to take off.
The aircraft can takeoff under the following conditions:
The voltage differential between the batteries in compartments 1, 2, and 6 should be less than 1.5V and differential between the batteries in compartments 3, 4, and 5 batteries should also be less than 1.5V. The battery levels of 1, 2, and 6 batteries should be close and the battery levels of 3, 4, and 5 batteries should be same. If the voltage differential between 1, 2, 6 and 3, 4, and 5 is greater than 1.5V, the aircraft can still takeoff. Overall aircraft power will be displayed based on the set batteries with the lowest charge. It is recommended to fully charge all six batteries before takeoff.
The aircraft can takeoff under the following conditions:
The voltage differential between the batteries in compartments 1, 2, and 6 should be less than 1.5V and differential between the batteries in compartments 3, 4, and 5 batteries should also be less than 1.5V. The battery levels of 1, 2, and 6 batteries should be close and the battery levels of 3, 4, and 5 batteries should be same. If the voltage differential between 1, 2, 6 and 3, 4, and 5 is greater than 1.5V, the aircraft can still takeoff. Overall aircraft power will be displayed based on the set batteries with the lowest charge. It is recommended to fully charge all six batteries before takeoff.
When powering on, should the six batteries be turned on individually?
No, when turning on one intelligent flight battery, the other batteries will also automatically turn on. When turning off one intelligent flight battery, the other batteries will automatically turn off.
Does the M600 support master and slave control? How many slave devices can be connected?
Yes, up to 3 slave devices can be connected at a time.
After assembling M600, it shakes back and forth.
This is normal. The design is intentional because it reduces vibration.
How can find out if any of the redundant components are working abnormally?
Redundant GPS/IMU modules have LED status indicators. Green and blue light indicate they’re functioning normally. Red light indicates that there is a problem. Please connect to the Assistant software or the App to identify the issue.
What gimbals does the M600 support?
The Zenmuse Z15/X3/X5/X5R/XT and the Ronin-MX.
What development tools can be used with the M600?
The M600 supports Mobile SDK and Onboard SDK development. Manifold can also be used with the M600.
Can the M600’s motors be exchanged with the motors from the MG-1?
No.
Compared to the S1000+, what are some new functions of the M600?
1. New flight controller, the A3.
2. New video downlink system, Lightbridge 2.
3. Can carry the Ronin-MX.
4. E2000 propulsion system, which is more powerful.
5. Optimized mechanical structure.
2. New video downlink system, Lightbridge 2.
3. Can carry the Ronin-MX.
4. E2000 propulsion system, which is more powerful.
5. Optimized mechanical structure.
Are the X5, X3, and Ronin-MX gimbal installation sets compatible with the S1000+?
No.
18. How can I upgrade the firmware for a TB47S or TB48S Intelligent Flight Battery?
The Intelligent Flight Battery will be upgraded when you upgrade the aircraft firmware. Insert the Intelligent Flight Battery into the Matrice 600 and connect the Matrice 600 to DJI Assistant 2 to upgrade.
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM
19. How can I upgrade the firmware for the Matrice 600’s remote controller?
You can upgrade remote controller firmware with the DJI GO app.
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM
20. How can I upgrade the Matrice 600 and the Zenmuse X3 or X5, if I want to use them together?
The Matrice 600 and Zenmuse X3/X5 need to be upgraded separately. The Matrice 600 is upgraded with DJI Assistant 2, while the Zenmuse X3 and X5 are upgraded with an SD card.
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM&t=24s
For more details, please refer to this tutorial video:
https://www.youtube.com/watch?v=skjGKVTI2VM&t=24s
Specification
What components does the M600 set contain?
An aircraft frame, six intelligent batteries, two battery charging hubs, two battery chargers, a remote controller, and a GPS module.
What is the length of the M600’s wheelbase?
1133mm.
In total, how much does the M600 weigh? What is its maximum takeoff weight?
The total weight is 9103g (with six TB47S batteries), 9613g (with six TB48S batteries). Maximum takeoff weight is 15.1Kg.
What is the propulsion system of M600? Does it support to replace E2000 professional propulsion?
M600 is using E2000 propulsion system. The motor version is 6010, the ESC version is E1240, and the propeller version is 2170.
What is the difference between the M600 TB47S/TB48S intelligent batteries and the M100 TB47D/TB48D intelligent batteries?
Battery capacity and size are the same, but their firmware is different. So, they cannot be used interchangeably. Please use the DJI TB47S/TB48S intelligent flight batteries.
What is the standard flight controller of M600, the A3 or A3 pro?
The A3 is standard. Users can also install a redundant system or D-RTK.
What is the max flight altitude of M600?
2500m.
How are M600’s arms angled?
The arms have an 8°lean angle and 3°tilt angle.
How can I retract M600’s landing gears? Will they retract automatically?
Toggle landing gear control switch and retract/put down M600 landing gear. You can turn on intelligent landing gear in DJI GO app. From 1.2m above the ground, the landing gear will automatically lift. In 1.2m below the ground, the landing gear will not automatically put down.
What is the gain value of M600?
Default gain value.
What is the hovering accuracy while using RTK?
Horizontal: 2 cm + 1 ppm
Altitude: 3 cm + 1 ppm
Ppm (parts per million): deviation is 1 mm per km.
Altitude: 3 cm + 1 ppm
Ppm (parts per million): deviation is 1 mm per km.
Search for More Information
Nous contacter
Service d'assistance téléphonique
Europe (Anglais): +31 20 654 5202
Lun-Dim 9 h 00 à 21 h 00 (CET/CEST)
Vous pouvez également nous envoyer un e-mail. En cas de problème urgent, contactez-nous via le service client en ligne pour des services en temps réel.