Specifications

Max Thrust17 kg/rotor (44.4 V, Sea Level)
Recommended Battery12S LiPo
Recommended Takeoff Weight6.0 - 8.0 kg/rotor (Sea Level)
Frame Arm Outer Diameter40 mm
Frame Arm Inner Diameter37mm
Operating Temperature-10 to 50 ℃

Motor

Stator Size100×15 mm
KV115 rpm/V
Weight654 g

ESC

Max Allowable Voltage52.2 V
Max Allowable Current (Continuous)100 A
Max Peak Current (< 3 sec)130 A
PWM Input Signal Level3.3 V / 5 V Compatible
Operating Pulse Width1120 to1920 μs
Signal Frequency30 Hz to 500 Hz
Battery12S LiPo

Propeller

Diameter x Thread Pitch33×9 inch (840×230 mm)
Weight (Single Propeller)315 g

M12 MOTOR PERFORMANCE

e5000

The data above was measured with an input voltage of 44.4 V, at a temperature of 25℃ and sea level. The thrust was adjusted by the throttle.

e5000

The data above was measured at full throttle, at a temperature of 25℃ and sea level.

M12 MOTOR PERFORMANCE

e5000

I – Current, P – Input Power, η – Electrical Efficiency, T – Thrust, N – Rotational Speed
The data above was measured with an input voltage of 44.4 V, at a temperature of 25℃ and sea level. The rotational speed was adjusted by the throttle.

e5000

η – Efficiency, I – Current, P – Output Power, Τ – Torque, N – Rotational Speed
The data above contain theoretical values measured with an input voltage of 44.4 V, for reference only. When operating at a temperature of 25℃ with no additional cooling devices, the motor cannot operate with a current more than 85 A. It can support short term operation (about 10 to 30 sec) with a current between 50 A and 85 A, and continuous operation with a current under 50 A. The motor run time should depend on the actual environmental temperature and cooling conditions.

DOCUMENTS & MANUALS

  • E7000 User Manual v1.2
    2018-04-26

SOFTWARE

  • DJI Assistant 2