- Camera
What updates does Osmo 360 II have compared to Osmo 360?
Osmo 360 II primarily features the following key upgrades compared to Osmo 360:
1. Supports native 360° video at up to 8K/60fps, delivering both high resolution and high frame rates.
2. Captures 360° video with up to 14.5 stops of dynamic range [1], preserving maximum detail in highlights and shadows.
3. Features AI SuperNight 2.0 at up to 8K/60fps for vastly improved low-light performance.
4. Both lenses feature an upgraded ion sputtering coating for enhanced scratch resistance [2], paired with a new replaceable design.
5. New Spotlight Follow mode [3] automatically tracks the subject for precisely framed 360° video. Easily export subject-tracked 4K flat videos via the DJI Mimo app or DJI Studio, skipping the tedious edits.
6. Supports shooting up to 8K/60fps 360° video. With DJI Studio's AI frame interpolation, it exports buttery-smooth slow motion—equivalent to cropped 8K/480fps[4]. You can also capture in 4K/240fps to unlock up to 64× slow motion [5] in post.
7. Osmo All-Scenario Ecosystem [6]: Features the Osmo Dual-Direction Quick-Release design, tap to connect via NFC, and more. See the official product page for details.1. Dynamic range data was measured in a controlled laboratory environment in Panoramic Video mode (8K/30fps), with Normal color mode selected, Auto exposure enabled, and Metering Mode set to Front and Back Metering.
2. An upgraded ion sputtering coating process is applied to the surfaces of both lenses. For details, refer to the product page on the official DJI website.
3. Spotlight Follow mode supports exporting flat video at up to 4K/30fps.
4. Using native 8K/60fps 360° footage, DJI Studio's AI frame interpolation can generate up to 8× slow-motion video, achieving a smoothness equivalent to cropping 8K/480fps 360° footage. Since 360° video requires field-of-view cropping when exported as a flat video, the final export resolution depends on the actual software settings.
5. Only supported on Mac computers with Apple silicon.
6. Related accessories are sold separately.What are the advantages of Osmo 360 II's native 8K/60fps 360° video?
Equipped with a high-performance ISP chip and 1-inch imaging*, Osmo 360 II captures native 8K/60fps 360° video with the following advantages:
1. Delivers smoother footage in high-speed scenarios, effectively reducing motion blur while balancing high resolution and high frame rates.
2. When played on NTSC-standard devices like smartphones and computer screens, the native 8K/60fps video greatly matches the display's refresh rate. This effectively reduces stuttering for a smoother viewing experience.
3. Supports shooting 2x slow motion in 8K resolution.
4. Easily matches the mainstream frame rates of smartphones and handheld cameras. This eliminates the need for frame rate conversion when editing footage from multiple devices, effectively preventing skipped frames and ensuring a smoother post-production workflow.* When capturing 360° content, each of Osmo 360 II's two CMOS sensors features an imaging area equivalent to that of a 1-inch CMOS sensor with a 4:3 aspect ratio.
How do I protect the lenses of Osmo 360 II?
Osmo 360 II's dual fisheye lenses are treated with multi-layer ion hardening and an advanced ultra-hard optical film for superior scratch and wear resistance. However, as high-precision optical components, careful handling is still required:
1. When storing the camera, use the silicone lens cap or place the camera in the camera protective pouch to prevent scratches from keys or sand. Before use, check the inside of the cap or pouch to ensure no sand or debris is trapped inside.
2. Before shooting, remove the silicone lens cap or camera pouch and wipe the lens clean to ensure it is free of fingerprints and smudges that may affect image quality.
3. When shooting in complex environments prone to impacts, we recommend using the Osmo 360 Transparent Lens Protectors* for enhanced safety.
4. With the replaceable lens design, the outer lens can be replaced using the Osmo 360 II Lens Replacement Kit** in case of accidental damage.* Osmo 360 Transparent Lens Protectors are sold separately.
** Osmo 360 II Lens Replacement Kit is sold separately.What resolution settings does Osmo 360 II support?
Supports the following resolutions:
Normal:
- Panoramic Video:
8K: 7680 × 3840@24/25/30/48/50/60fps
6K: 6000 × 3000@24/25/30/48/50/60fps
- Single-Lens Video:
4K (4:3): 3840 × 2880@25/30/50/60fps
4K (16:9): 3840 × 2160@25/30/50/60fps
2.7K (4:3): 2688 × 2016@25/30/50/60fps
2.7K (16:9): 2688 × 1512@25/30/50/60fps
- Single-Lens Boost Video:
4K (1:1): 3840 × 3840@25/30/50/60fps
4K (4:3): 3840 × 2880@25/30/50/60/100/120fps
4K (16:9): 3840 × 2160@25/30/50/60/100/120fps
4K (9:16): 2160 × 3840@25/30/50/60/100/120fps
2.7K (1:1): 2688 × 2688@25/30/50/60fps
2.7K (4:3): 2688 × 2016@25/30/50/60/100/120fps
2.7K (16:9): 2688 × 1512@25/30/50/60/100/120fps
2.7K (9:16): 1512 × 2688@25/30/50/60/100/120fps
SuperNight:
- Panoramic Video:
8K: 7680 × 3840@24/25/30/48/50/60fps
6K: 6000 × 3000@24/25/30/48/50/60fps
- Single-Lens Video:
4K (4:3): 3840 × 2880@25/30fps
4K (16:9): 3840 × 2160@25/30fps
2.7K (4:3): 2688 × 2016@25/30fps
2.7K (16:9): 2688 × 1512@25/30fpsHow does Osmo 360 II make the selfie stick invisible? What should be noted when using this feature?
Osmo 360 II is equipped with two fisheye lenses, each capable of capturing images with an over 180° field of view. During shooting, the camera uses algorithms to stitch together images captured by the two lenses and utilizes their overlapping area to "erase" the selfie stick at the bottom of the camera, achieving the seamless invisible effect.
For the ideal invisible effect, it is recommended to use the official Invisible Selfie Stick*. When mounting it, ensure that the camera and the selfie stick form a perfectly straight line so the algorithm functions properly.
The invisible effect may not work as intended if an adjustable quick-release adapter creates an angle between the camera and the stick, or if the mounting connection deviates from the camera's front-rear plane.* The Invisible Selfie Stick is sold separately.
What is the safe stitching distance for Osmo 360 II?
For optimal panoramic stitching effect, it is recommended to keep Osmo 360 II at least 0.75 meters* away from the subject. If the distance is too close, the images captured by the left and right lenses may differ significantly, which may result in unnatural stitching or anomalies. As long as the distance is greater than the safe minimum, the camera will automatically produce smooth and natural stitching results.* When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
What video formats does Osmo 360 II support?
OSV for panoramic videos and MP4 (HEVC) for flat videos.Does Osmo 360 II support switching lenses during Single-Lens Video recording?
Yes. Osmo 360 II allows you to switch between lenses during Single-Lens Video recording without interruptions. This feature supports recording specifications up to and including 4K/60fps.Can Osmo 360 II shoot slow-motion videos?
Yes. In Panoramic Video mode, it supports up to 8× slow motion (4K/240fps), and in Single-Lens Video mode, it supports up to 4× slow motion (4K/120fps) flat video.What is the D-Log M color profile of Osmo 360 II?
D-Log M is a color profile that provides users with greater flexibility for color grading in post-production. By increasing the brightness of shadow areas and suppressing highlights, it preserves more image details. When shooting with D-Log M, the footage will have reduced saturation and contrast, but it retains more color and brightness information, making it easier to create different video styles during post-processing.How do I export my photos and videos?
There are three options available:
1. Connect to the DJI Mimo app and download content from the microSD card and built-in storage to your smartphone.
2. Use a card reader to export content from the microSD card to your computer or smartphone.
3. Swipe down from the camera view, tap the Settings icon, and select USB Mode. Follow the on-screen prompts to connect the camera to a computer or smartphone with a USB-C port using a USB-C cable. You can then export content from the microSD card and built-in storage.Where is the footage saved in Osmo 360 II?
The footage is saved either on the microSD card inserted into the camera body or in the camera's built-in storage.Does Osmo 360 II use prime lenses?
Yes, Osmo 360 II uses two fisheye prime lenses.Can I shoot HDR videos with Osmo 360 II?
Osmo 360 II records with high dynamic range by default, so there is no separate HDR shooting mode. You can further enhance image quality using the HDR features in the DJI Mimo app or DJI Studio during post-production.How do I use Spotlight Follow on Osmo 360 II?
Spotlight Follow mode* automatically locks onto and tracks a subject in 360°, recording both the subject and their perspective. It is ideal for skiing, cycling, and other self-recording or follow-cam scenarios.
You can use the Register Subject feature when using this mode for the first time. The camera will automatically detect and follow the registered subject once they enter the frame. To change the subject, double-tap the white box on the screen; a green box will appear to indicate the new subject is locked. The view will then move in sync with the subject.
If the subject is lost, the green box turns red. If the subject remains lost for more than five seconds, the camera will prompt that the subject is lost. Tracking will not resume automatically even if the subject re-enters the frame; you must manually re-lock the subject to continue.
360° videos shot in Spotlight Follow mode* eliminate the need for manual reframing in post. You can export flat videos that continuously keep the subject in frame via the DJI Mimo app or DJI Studio.* Spotlight Follow mode supports exporting flat video at up to 4K/30fps.
What updates does Osmo 360 II have compared to Osmo 360?
Osmo 360 II primarily features the following key upgrades compared to Osmo 360:
1. Supports native 360° video at up to 8K/60fps, delivering both high resolution and high frame rates.
2. Captures 360° video with up to 14.5 stops of dynamic range [1], preserving maximum detail in highlights and shadows.
3. Features AI SuperNight 2.0 at up to 8K/60fps for vastly improved low-light performance.
4. Both lenses feature an upgraded ion sputtering coating for enhanced scratch resistance [2], paired with a new replaceable design.
5. New Spotlight Follow mode [3] automatically tracks the subject for precisely framed 360° video. Easily export subject-tracked 4K flat videos via the DJI Mimo app or DJI Studio, skipping the tedious edits.
6. Supports shooting up to 8K/60fps 360° video. With DJI Studio's AI frame interpolation, it exports buttery-smooth slow motion—equivalent to cropped 8K/480fps[4]. You can also capture in 4K/240fps to unlock up to 64× slow motion [5] in post.
7. Osmo All-Scenario Ecosystem [6]: Features the Osmo Dual-Direction Quick-Release design, tap to connect via NFC, and more. See the official product page for details.1. Dynamic range data was measured in a controlled laboratory environment in Panoramic Video mode (8K/30fps), with Normal color mode selected, Auto exposure enabled, and Metering Mode set to Front and Back Metering.
2. An upgraded ion sputtering coating process is applied to the surfaces of both lenses. For details, refer to the product page on the official DJI website.
3. Spotlight Follow mode supports exporting flat video at up to 4K/30fps.
4. Using native 8K/60fps 360° footage, DJI Studio's AI frame interpolation can generate up to 8× slow-motion video, achieving a smoothness equivalent to cropping 8K/480fps 360° footage. Since 360° video requires field-of-view cropping when exported as a flat video, the final export resolution depends on the actual software settings.
5. Only supported on Mac computers with Apple silicon.
6. Related accessories are sold separately.What are the advantages of Osmo 360 II's native 8K/60fps 360° video?
Equipped with a high-performance ISP chip and 1-inch imaging*, Osmo 360 II captures native 8K/60fps 360° video with the following advantages:
1. Delivers smoother footage in high-speed scenarios, effectively reducing motion blur while balancing high resolution and high frame rates.
2. When played on NTSC-standard devices like smartphones and computer screens, the native 8K/60fps video greatly matches the display's refresh rate. This effectively reduces stuttering for a smoother viewing experience.
3. Supports shooting 2x slow motion in 8K resolution.
4. Easily matches the mainstream frame rates of smartphones and handheld cameras. This eliminates the need for frame rate conversion when editing footage from multiple devices, effectively preventing skipped frames and ensuring a smoother post-production workflow.* When capturing 360° content, each of Osmo 360 II's two CMOS sensors features an imaging area equivalent to that of a 1-inch CMOS sensor with a 4:3 aspect ratio.
How do I protect the lenses of Osmo 360 II?
Osmo 360 II's dual fisheye lenses are treated with multi-layer ion hardening and an advanced ultra-hard optical film for superior scratch and wear resistance. However, as high-precision optical components, careful handling is still required:
1. When storing the camera, use the silicone lens cap or place the camera in the camera protective pouch to prevent scratches from keys or sand. Before use, check the inside of the cap or pouch to ensure no sand or debris is trapped inside.
2. Before shooting, remove the silicone lens cap or camera pouch and wipe the lens clean to ensure it is free of fingerprints and smudges that may affect image quality.
3. When shooting in complex environments prone to impacts, we recommend using the Osmo 360 Transparent Lens Protectors* for enhanced safety.
4. With the replaceable lens design, the outer lens can be replaced using the Osmo 360 II Lens Replacement Kit** in case of accidental damage.* Osmo 360 Transparent Lens Protectors are sold separately.
** Osmo 360 II Lens Replacement Kit is sold separately.What resolution settings does Osmo 360 II support?
Supports the following resolutions:
Normal:
- Panoramic Video:
8K: 7680 × 3840@24/25/30/48/50/60fps
6K: 6000 × 3000@24/25/30/48/50/60fps
- Single-Lens Video:
4K (4:3): 3840 × 2880@25/30/50/60fps
4K (16:9): 3840 × 2160@25/30/50/60fps
2.7K (4:3): 2688 × 2016@25/30/50/60fps
2.7K (16:9): 2688 × 1512@25/30/50/60fps
- Single-Lens Boost Video:
4K (1:1): 3840 × 3840@25/30/50/60fps
4K (4:3): 3840 × 2880@25/30/50/60/100/120fps
4K (16:9): 3840 × 2160@25/30/50/60/100/120fps
4K (9:16): 2160 × 3840@25/30/50/60/100/120fps
2.7K (1:1): 2688 × 2688@25/30/50/60fps
2.7K (4:3): 2688 × 2016@25/30/50/60/100/120fps
2.7K (16:9): 2688 × 1512@25/30/50/60/100/120fps
2.7K (9:16): 1512 × 2688@25/30/50/60/100/120fps
SuperNight:
- Panoramic Video:
8K: 7680 × 3840@24/25/30/48/50/60fps
6K: 6000 × 3000@24/25/30/48/50/60fps
- Single-Lens Video:
4K (4:3): 3840 × 2880@25/30fps
4K (16:9): 3840 × 2160@25/30fps
2.7K (4:3): 2688 × 2016@25/30fps
2.7K (16:9): 2688 × 1512@25/30fpsHow does Osmo 360 II make the selfie stick invisible? What should be noted when using this feature?
Osmo 360 II is equipped with two fisheye lenses, each capable of capturing images with an over 180° field of view. During shooting, the camera uses algorithms to stitch together images captured by the two lenses and utilizes their overlapping area to "erase" the selfie stick at the bottom of the camera, achieving the seamless invisible effect.
For the ideal invisible effect, it is recommended to use the official Invisible Selfie Stick*. When mounting it, ensure that the camera and the selfie stick form a perfectly straight line so the algorithm functions properly.
The invisible effect may not work as intended if an adjustable quick-release adapter creates an angle between the camera and the stick, or if the mounting connection deviates from the camera's front-rear plane.* The Invisible Selfie Stick is sold separately.
What is the safe stitching distance for Osmo 360 II?
For optimal panoramic stitching effect, it is recommended to keep Osmo 360 II at least 0.75 meters* away from the subject. If the distance is too close, the images captured by the left and right lenses may differ significantly, which may result in unnatural stitching or anomalies. As long as the distance is greater than the safe minimum, the camera will automatically produce smooth and natural stitching results.* When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
What video formats does Osmo 360 II support?
OSV for panoramic videos and MP4 (HEVC) for flat videos.Does Osmo 360 II support switching lenses during Single-Lens Video recording?
Yes. Osmo 360 II allows you to switch between lenses during Single-Lens Video recording without interruptions. This feature supports recording specifications up to and including 4K/60fps.Can Osmo 360 II shoot slow-motion videos?
Yes. In Panoramic Video mode, it supports up to 8× slow motion (4K/240fps), and in Single-Lens Video mode, it supports up to 4× slow motion (4K/120fps) flat video.What is the D-Log M color profile of Osmo 360 II?
D-Log M is a color profile that provides users with greater flexibility for color grading in post-production. By increasing the brightness of shadow areas and suppressing highlights, it preserves more image details. When shooting with D-Log M, the footage will have reduced saturation and contrast, but it retains more color and brightness information, making it easier to create different video styles during post-processing.How do I export my photos and videos?
There are three options available:
1. Connect to the DJI Mimo app and download content from the microSD card and built-in storage to your smartphone.
2. Use a card reader to export content from the microSD card to your computer or smartphone.
3. Swipe down from the camera view, tap the Settings icon, and select USB Mode. Follow the on-screen prompts to connect the camera to a computer or smartphone with a USB-C port using a USB-C cable. You can then export content from the microSD card and built-in storage.Where is the footage saved in Osmo 360 II?
The footage is saved either on the microSD card inserted into the camera body or in the camera's built-in storage.Does Osmo 360 II use prime lenses?
Yes, Osmo 360 II uses two fisheye prime lenses.Can I shoot HDR videos with Osmo 360 II?
Osmo 360 II records with high dynamic range by default, so there is no separate HDR shooting mode. You can further enhance image quality using the HDR features in the DJI Mimo app or DJI Studio during post-production.How do I use Spotlight Follow on Osmo 360 II?
Spotlight Follow mode* automatically locks onto and tracks a subject in 360°, recording both the subject and their perspective. It is ideal for skiing, cycling, and other self-recording or follow-cam scenarios.
You can use the Register Subject feature when using this mode for the first time. The camera will automatically detect and follow the registered subject once they enter the frame. To change the subject, double-tap the white box on the screen; a green box will appear to indicate the new subject is locked. The view will then move in sync with the subject.
If the subject is lost, the green box turns red. If the subject remains lost for more than five seconds, the camera will prompt that the subject is lost. Tracking will not resume automatically even if the subject re-enters the frame; you must manually re-lock the subject to continue.
360° videos shot in Spotlight Follow mode* eliminate the need for manual reframing in post. You can export flat videos that continuously keep the subject in frame via the DJI Mimo app or DJI Studio.* Spotlight Follow mode supports exporting flat video at up to 4K/30fps.
- Operation
What App do I use to control Osmo 360 II with my smartphone?
The DJI Mimo app. It allows you to sync photos and videos, edit, and share.How do I activate Osmo 360 II?
You can follow the steps below to activate the device:
1. Download the DJI Mimo app by scanning the QR code shown on the camera screen prompt or from an app store.
2. Press and hold the Quick Switch Button to turn on Osmo 360 II.
3. Enable Wi-Fi and Bluetooth on the mobile device.
4. After launching the DJI Mimo app, tap on the camera icon on the home page to connect the camera. Follow the on-screen instructions for further steps.
5. After connecting Osmo 360 II to the DJI Mimo app, you will be prompted to activate the device. Complete the activation by following the prompts on the app.How do I update the firmware on Osmo 360 II?
The DJI Mimo app will send firmware push messages automatically. Follow the prompts to complete the update.How do I switch between the front and rear lenses?
Tap the front/rear lens switch icon in the lower right corner of the touchscreen, or press the physical button at the lower right of the touchscreen, which is set to switch between the front and rear lenses by default.Does the screen support touch control?
Yes. You can control parameter settings, mode switching, video playback, and more.Does Osmo 360 II support Voice Control?
Yes. Osmo 360 II supports voice commands in English and Mandarin Chinese. It's recommended to use Voice Control within 1 m from the camera in a relatively quiet environment.
English Commands:
Start Recording
Stop Recording
Take Photo
Shut DownDoes Osmo 360 II support Gesture Control?
Yes. Either hand can be detected within 2-meter range*. Raise an open palm to start or stop video recording, or to take a photo.* The effective distance may vary with future firmware updates.
Does Osmo 360 II support Twist Shot?
Yes. Twist the selfie stick twice around axis, with each twist greater than 45°, to take photo or start/stop video recording.How do I enable Livestream on Osmo 360 II?
1. Please update your Osmo 360 II firmware and the DJI Mimo app to the latest version, then connect Osmo 360 II to the DJI Mimo app.
2. Enter the Preview interface in DJI Mimo app, and switch to Single Lens mode. At this point, the "Livestream" option will appear on the right side of the interface.
3. Tap Livestream to open the settings.
4. Select a live streaming platform and tap Start Livestream Settings to enter the settings page. Please connect to a secured Wi-Fi network with Internet access and adjust the streaming settings as required.
5. Log in to your live streaming platform account. Please make sure you have completed identity verification and agreed to the required terms.
6. When setup is complete, tap Start Livestream.How do I achieve 64× slow motion?
Shoot 4K/240fps 360° video in Pano Slow Motion, then apply an 8× slow-motion effect in DJI Studio* to generate a 4K/1920fps 360° video. This achieves 64× slow motion and allows you to export flat videos.* Only supported on Mac computers with Apple silicon.
How do I share a video that I shot?
You can save the video to your smartphone and share, or use the DJI Mimo app to upload it and share the link generated.How can I manually set camera parameters like shutter speed and ISO?
1. On Osmo 360 II's camera view, tap the Image/Audio Settings icon on the right side, enable PRO mode in the upper right corner, and set Exposure to M (Manual) mode to adjust shutter speed and ISO parameters.
2. In the DJI Mimo app, tap the "..." icon on the camera view and enable PRO mode. Then, return to the camera view and tap the Image/Audio Settings icon to adjust shutter speed and ISO parameters.Does Osmo 360 II have sleep mode?
Yes. When Osmo 360 II is powered on, press and hold the Quick Switch Button to enter sleep mode. To wake it up, press the Quick Switch Button once. Additionally, pressing the Shutter/Record Button once will trigger SnapShot.What is the SnapShot feature on Osmo 360 II?
When Osmo 360 II is powered off, simply press the Shutter/Record Button to quickly power on and start recording using your preset SnapShot settings, ensuring you never miss a moment. After recording stops, the camera will automatically power off if left idle for 3 seconds.Can I set the playback volume of Osmo 360 II?
Yes. Tap the Volume icon in the upper right corner of the playback page to turn the sound on or off. Press and hold the icon to adjust the volume.What App do I use to control Osmo 360 II with my smartphone?
The DJI Mimo app. It allows you to sync photos and videos, edit, and share.How do I activate Osmo 360 II?
You can follow the steps below to activate the device:
1. Download the DJI Mimo app by scanning the QR code shown on the camera screen prompt or from an app store.
2. Press and hold the Quick Switch Button to turn on Osmo 360 II.
3. Enable Wi-Fi and Bluetooth on the mobile device.
4. After launching the DJI Mimo app, tap on the camera icon on the home page to connect the camera. Follow the on-screen instructions for further steps.
5. After connecting Osmo 360 II to the DJI Mimo app, you will be prompted to activate the device. Complete the activation by following the prompts on the app.How do I update the firmware on Osmo 360 II?
The DJI Mimo app will send firmware push messages automatically. Follow the prompts to complete the update.How do I switch between the front and rear lenses?
Tap the front/rear lens switch icon in the lower right corner of the touchscreen, or press the physical button at the lower right of the touchscreen, which is set to switch between the front and rear lenses by default.Does the screen support touch control?
Yes. You can control parameter settings, mode switching, video playback, and more.Does Osmo 360 II support Voice Control?
Yes. Osmo 360 II supports voice commands in English and Mandarin Chinese. It's recommended to use Voice Control within 1 m from the camera in a relatively quiet environment.
English Commands:
Start Recording
Stop Recording
Take Photo
Shut DownDoes Osmo 360 II support Gesture Control?
Yes. Either hand can be detected within 2-meter range*. Raise an open palm to start or stop video recording, or to take a photo.* The effective distance may vary with future firmware updates.
Does Osmo 360 II support Twist Shot?
Yes. Twist the selfie stick twice around axis, with each twist greater than 45°, to take photo or start/stop video recording.How do I enable Livestream on Osmo 360 II?
1. Please update your Osmo 360 II firmware and the DJI Mimo app to the latest version, then connect Osmo 360 II to the DJI Mimo app.
2. Enter the Preview interface in DJI Mimo app, and switch to Single Lens mode. At this point, the "Livestream" option will appear on the right side of the interface.
3. Tap Livestream to open the settings.
4. Select a live streaming platform and tap Start Livestream Settings to enter the settings page. Please connect to a secured Wi-Fi network with Internet access and adjust the streaming settings as required.
5. Log in to your live streaming platform account. Please make sure you have completed identity verification and agreed to the required terms.
6. When setup is complete, tap Start Livestream.How do I achieve 64× slow motion?
Shoot 4K/240fps 360° video in Pano Slow Motion, then apply an 8× slow-motion effect in DJI Studio* to generate a 4K/1920fps 360° video. This achieves 64× slow motion and allows you to export flat videos.* Only supported on Mac computers with Apple silicon.
How do I share a video that I shot?
You can save the video to your smartphone and share, or use the DJI Mimo app to upload it and share the link generated.How can I manually set camera parameters like shutter speed and ISO?
1. On Osmo 360 II's camera view, tap the Image/Audio Settings icon on the right side, enable PRO mode in the upper right corner, and set Exposure to M (Manual) mode to adjust shutter speed and ISO parameters.
2. In the DJI Mimo app, tap the "..." icon on the camera view and enable PRO mode. Then, return to the camera view and tap the Image/Audio Settings icon to adjust shutter speed and ISO parameters.Does Osmo 360 II have sleep mode?
Yes. When Osmo 360 II is powered on, press and hold the Quick Switch Button to enter sleep mode. To wake it up, press the Quick Switch Button once. Additionally, pressing the Shutter/Record Button once will trigger SnapShot.What is the SnapShot feature on Osmo 360 II?
When Osmo 360 II is powered off, simply press the Shutter/Record Button to quickly power on and start recording using your preset SnapShot settings, ensuring you never miss a moment. After recording stops, the camera will automatically power off if left idle for 3 seconds.Can I set the playback volume of Osmo 360 II?
Yes. Tap the Volume icon in the upper right corner of the playback page to turn the sound on or off. Press and hold the icon to adjust the volume.
- Battery
How long is the operating time of Osmo 360 II?
Battery life supports up to 100 minutes* of 8K/30fps panoramic video recording, or up to 120 minutes with Endurance Mode on*.* Tested under laboratory conditions at 25° C (77° F) with Wi-Fi, Gesture Control off, Voice Control off, and Editing Assistant off, while recording 8K/30fps 360° Video with the screen off. Data was collected in a controlled environment and should be taken as reference only. When activating and using Osmo 360 II in the EU and UK, actual battery life may vary due to local regulations on product operating temperatures. Refer to the actual user experience.
Does Osmo 360 II support fast charging?
Yes. You can use a USB-C charger that supports the standard PD 3.0 protocol with a maximum PD output power of 30 W or above.Can I use Osmo Action series batteries with my Osmo 360 II?
Yes. Osmo Action Extreme Battery Plus (1950 mAh) and Osmo Action Extreme Battery (1770 mAh) are supported.How long is the operating time of Osmo 360 II?
Battery life supports up to 100 minutes* of 8K/30fps panoramic video recording, or up to 120 minutes with Endurance Mode on*.* Tested under laboratory conditions at 25° C (77° F) with Wi-Fi, Gesture Control off, Voice Control off, and Editing Assistant off, while recording 8K/30fps 360° Video with the screen off. Data was collected in a controlled environment and should be taken as reference only. When activating and using Osmo 360 II in the EU and UK, actual battery life may vary due to local regulations on product operating temperatures. Refer to the actual user experience.
Does Osmo 360 II support fast charging?
Yes. You can use a USB-C charger that supports the standard PD 3.0 protocol with a maximum PD output power of 30 W or above.Can I use Osmo Action series batteries with my Osmo 360 II?
Yes. Osmo Action Extreme Battery Plus (1950 mAh) and Osmo Action Extreme Battery (1770 mAh) are supported.
- APP
Which mobile phones and computers are compatible with Osmo 360 II?
For details on mobile phones and computers compatible with Osmo 360 II, please check the Osmo 360 II Downloads page.How do I edit videos shot with Osmo 360 II using desktop software?
Please refer to the Osmo 360 II tutorial videos.How do I use ND filter effects?
Update DJI Studio or the DJI Mimo app to the latest version. Adjust the ND filter parameters in Motion Blur mode. ND filter effects are currently only supported on Mac computers with Apple silicon (DJI Studio), and on iPhone 14 and later models (DJI Mimo app).Which mobile phones and computers are compatible with Osmo 360 II?
For details on mobile phones and computers compatible with Osmo 360 II, please check the Osmo 360 II Downloads page.How do I edit videos shot with Osmo 360 II using desktop software?
Please refer to the Osmo 360 II tutorial videos.How do I use ND filter effects?
Update DJI Studio or the DJI Mimo app to the latest version. Adjust the ND filter parameters in Motion Blur mode. ND filter effects are currently only supported on Mac computers with Apple silicon (DJI Studio), and on iPhone 14 and later models (DJI Mimo app).
- Accessories
Is the Osmo 360 II quick-release mount compatible with cameras like the Osmo Action series or Osmo Nano?
It supports the dual-direction magnetic quick-release mounts of Osmo Nano and Osmo Action 6. It is not recommended for use with other cameras. While it physically fits their quick-release mounts, the magnetic connection is weak.What accessories does Osmo 360 II have?
Osmo 360 II offers a wide range of accessories for different scenarios. For details, please refer to the product page on the official website.Can I use Osmo 360 II's accessories with other DJI Osmo series products?
Osmo 360 II features an upgraded dual-direction magnetic quick-release design, making it compatible with Osmo Action dual-direction magnetic quick-release accessories. For more details, please check the Osmo 360 II Downloads page.How do I mount different accessories to Osmo 360 II?
1. Attach official quick-release accessories directly via the quick-release mount.
2. Attach other accessories using the 1/4-inch threaded hole at the bottom of the camera.Can I mount third-party action camera accessories to Osmo 360 II?
Yes. You can mount third-party action camera accessories with the Quick-Release Adapter Mount.Is the Osmo Curved Adhesive Base Max reusable?
No, the Osmo Curved Adhesive Base Max* uses 3M adhesives that are not reusable.* Osmo Curved Adhesive Base Max is sold separately.
How scratch-resistant are the Osmo 360 Transparent Lens Protectors? Will they easily get scratched and affect shooting?
The Osmo 360 Transparent Lens Protectors* feature a multi-layer hardened coating that provides scratch and wear resistance while minimizing image quality loss. They can easily withstand minor scrapes from normal daily use. However, because they are made of plastic, proper care is still required. Heavy impacts or abrasive friction may cause noticeable scratches. If this happens, we recommend replacing the protectors to maintain optimal image quality.* Osmo 360 Transparent Lens Protectors are sold separately.
Can the Osmo 360 Transparent Lens Protectors be used underwater?
No. Osmo 360 Transparent Lens Protectors* are only splash-proof. Before installation, clean the camera lenses and surrounding mounting slots to ensure they are free of fingerprints, oil, or smudges. Any dust or debris on the inner or outer surfaces of the lenses or protectors will negatively affect image quality. Avoid using them in rain, snow, or during water sports, as these conditions can cause the protectors to fog up. If fogging occurs on the inside of the protectors, wipe them dry with a soft cloth before use. When removing the protectors, take care not to scratch the camera lenses.* Osmo 360 Transparent Lens Protectors are sold separately.
What precautions should be taken when installing or removing the Osmo 360 Transparent Lens Protectors?
Before installing the Osmo 360 Transparent Lens Protectors*, carefully clean the camera lens surface and the inner surface of the Protectors with a lens cloth.
To install, hold the outer surface of the Protector with your fingers. First, align the lower latch of the Protector with the mounting position at the bottom of the camera lens and snap it into place. Then, gently push the upper latch of the Protector into the reserved slot at the top of the camera until you hear a click, indicating that one side is installed successfully. Repeat this step for the other side.
After both Protectors are installed, carefully clean the outer surface to remove any fingerprints, oil, or other stains that may affect image quality.
To remove the Protectors, gently use your thumb to lift the upper latch from the raised area on the top of the Protector, then detach the lower latch by moving it downward along the lower slot. Do not use excessive force during installation or removal to avoid damaging the Protector latches.* Osmo 360 Transparent Lens Protectors are sold separately.
How does the Osmo 360 Invisible Waterproof Case eliminate underwater distortion?
Osmo 360 II features a specialized fisheye lens design, which can cause image distortion underwater due to light refraction. The Osmo 360 Invisible Waterproof Case* utilizes a custom optical design to correct this. It eliminates underwater distortion and remains completely invisible in your footage, ensuring clear and accurate imaging.* For diving, we recommend using the Osmo 360 Invisible Waterproof Case (sold separately) for underwater shooting up to 50 m. Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
Is the Osmo 360 II quick-release mount compatible with cameras like the Osmo Action series or Osmo Nano?
It supports the dual-direction magnetic quick-release mounts of Osmo Nano and Osmo Action 6. It is not recommended for use with other cameras. While it physically fits their quick-release mounts, the magnetic connection is weak.What accessories does Osmo 360 II have?
Osmo 360 II offers a wide range of accessories for different scenarios. For details, please refer to the product page on the official website.Can I use Osmo 360 II's accessories with other DJI Osmo series products?
Osmo 360 II features an upgraded dual-direction magnetic quick-release design, making it compatible with Osmo Action dual-direction magnetic quick-release accessories. For more details, please check the Osmo 360 II Downloads page.How do I mount different accessories to Osmo 360 II?
1. Attach official quick-release accessories directly via the quick-release mount.
2. Attach other accessories using the 1/4-inch threaded hole at the bottom of the camera.Can I mount third-party action camera accessories to Osmo 360 II?
Yes. You can mount third-party action camera accessories with the Quick-Release Adapter Mount.Is the Osmo Curved Adhesive Base Max reusable?
No, the Osmo Curved Adhesive Base Max* uses 3M adhesives that are not reusable.* Osmo Curved Adhesive Base Max is sold separately.
How scratch-resistant are the Osmo 360 Transparent Lens Protectors? Will they easily get scratched and affect shooting?
The Osmo 360 Transparent Lens Protectors* feature a multi-layer hardened coating that provides scratch and wear resistance while minimizing image quality loss. They can easily withstand minor scrapes from normal daily use. However, because they are made of plastic, proper care is still required. Heavy impacts or abrasive friction may cause noticeable scratches. If this happens, we recommend replacing the protectors to maintain optimal image quality.* Osmo 360 Transparent Lens Protectors are sold separately.
Can the Osmo 360 Transparent Lens Protectors be used underwater?
No. Osmo 360 Transparent Lens Protectors* are only splash-proof. Before installation, clean the camera lenses and surrounding mounting slots to ensure they are free of fingerprints, oil, or smudges. Any dust or debris on the inner or outer surfaces of the lenses or protectors will negatively affect image quality. Avoid using them in rain, snow, or during water sports, as these conditions can cause the protectors to fog up. If fogging occurs on the inside of the protectors, wipe them dry with a soft cloth before use. When removing the protectors, take care not to scratch the camera lenses.* Osmo 360 Transparent Lens Protectors are sold separately.
What precautions should be taken when installing or removing the Osmo 360 Transparent Lens Protectors?
Before installing the Osmo 360 Transparent Lens Protectors*, carefully clean the camera lens surface and the inner surface of the Protectors with a lens cloth.
To install, hold the outer surface of the Protector with your fingers. First, align the lower latch of the Protector with the mounting position at the bottom of the camera lens and snap it into place. Then, gently push the upper latch of the Protector into the reserved slot at the top of the camera until you hear a click, indicating that one side is installed successfully. Repeat this step for the other side.
After both Protectors are installed, carefully clean the outer surface to remove any fingerprints, oil, or other stains that may affect image quality.
To remove the Protectors, gently use your thumb to lift the upper latch from the raised area on the top of the Protector, then detach the lower latch by moving it downward along the lower slot. Do not use excessive force during installation or removal to avoid damaging the Protector latches.* Osmo 360 Transparent Lens Protectors are sold separately.
How does the Osmo 360 Invisible Waterproof Case eliminate underwater distortion?
Osmo 360 II features a specialized fisheye lens design, which can cause image distortion underwater due to light refraction. The Osmo 360 Invisible Waterproof Case* utilizes a custom optical design to correct this. It eliminates underwater distortion and remains completely invisible in your footage, ensuring clear and accurate imaging.* For diving, we recommend using the Osmo 360 Invisible Waterproof Case (sold separately) for underwater shooting up to 50 m. Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
- Other
Why does Osmo 360 II heat up during use?
When using high-specification, high-performance modes (such as 8K/60fps panoramic videos), the camera consumes more power, which can result in a noticeable increase in temperature. Additionally, extended recording sessions or prolonged handheld use can also cause the camera to feel warm.How do I alleviate camera overheating?
You can try the following methods:
1. Adjust shooting specifications: Select a lower resolution and frame rate (such as 6K/24fps or 6K/30fps) to effectively reduce power consumption and alleviate heat buildup.
2. Optimize camera settings: Turn off the screen display during shooting, and disable the Wi-Fi function when not needed.
3. Improve the operating environment: Ensure the camera is used in a well-ventilated area to help dissipate heat more effectively.Can I change the lens of Osmo 360 II?
Osmo 360 II features an all-new replaceable lens design. If the lens is accidentally damaged, the user can replace the outer lens using the Osmo 360 II Lens Replacement Kit*.* Osmo 360 II Lens Replacement Kit is sold separately.
How do I clean the lens area of Osmo 360 II?
1. Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in the cracks at the edge of the lens, use a dust blower or cotton swab for cleaning.
2. To clean water stains, oil smudges, or fingerprints on the lens, apply a few drops of lens cleaning solution on lens tissues and use a circular motion to wipe away.Is Osmo 360 II waterproof?
Yes, Osmo 360 II can be used underwater at depths of 10 m without a case*. For diving, it is recommended to use the Osmo 360 Invisible Waterproof Case**, which increases the waterproof depth up to 50 m***.* Before use, please ensure the battery compartment cover and USB-C Port Cover are securely closed. It is not recommended to use the camera body only for long-term underwater shooting or in environments with high water impact pressure. Osmo 360 II has an IP68 waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids. The camera alone is waterproof to a depth of 10 m, but due to the convex fisheye lens design, underwater light refraction may cause image distortion and stitching errors. Therefore, it is not recommended to use the camera body only for underwater shooting.
** Osmo 360 Invisible Waterproof Case is sold separately. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
*** Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition.What precautions should be taken when using Osmo 360 II underwater without a case?
1. Before use, ensure the battery compartment cover and USB-C Port Cover are securely closed.
2. The camera is waterproof up to 10 m without a case. However, due to the 360° camera's convex fisheye lens design, underwater light refraction may cause image distortion and stitching errors. Therefore, shooting underwater without a waterproof case is not recommended.
3. Do not use the camera in extreme water conditions, unknown liquids, hot springs, or corrosive liquids.
4. After underwater use, rinse the camera with fresh water and let it air-dry completely before next use.* For diving, we recommend using the Osmo 360 Invisible Waterproof Case (sold separately) for underwater shooting up to 50 m. Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
What microSD cards does Osmo 360 II support?
Recommended Models:
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 256GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 1TB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 64GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 128GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 256GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 512GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 1TB U3 A2 V30 microSDXCWhich Bluetooth headphones and headsets are compatible with Osmo 360 II?
Osmo 360 II supports the following Bluetooth headphones and headsets:
AirPods 3
AirPods 4
AirPods Pro 2
AirPods Pro 3
Sony WH-1000XM5
Bose QuietComfort Ultra II
HUAWEI FreeBuds 6
OnePlus Buds 4
OPPO Enco X3
RESO Pilot Pro
RESO Pilot Neo
Cardo EDGE
SENA 50S
Hengjiang C50 Heavy Bass Headset
VIMOTO V11X
VIMOTO V9S/X
VIMOTO V10S/X
VIMOTO V11S/X
AiRide G9+
LEXIN G2P
ASMAX F1 ProWhat should I do if dust or sand gets inside Osmo 360 II?
Osmo 360 II is dust-proof. However, if dust does get inside the device and cannot be cleaned, please contact DJI After-Sales for professional handling.Why does Osmo 360 II heat up during use?
When using high-specification, high-performance modes (such as 8K/60fps panoramic videos), the camera consumes more power, which can result in a noticeable increase in temperature. Additionally, extended recording sessions or prolonged handheld use can also cause the camera to feel warm.How do I alleviate camera overheating?
You can try the following methods:
1. Adjust shooting specifications: Select a lower resolution and frame rate (such as 6K/24fps or 6K/30fps) to effectively reduce power consumption and alleviate heat buildup.
2. Optimize camera settings: Turn off the screen display during shooting, and disable the Wi-Fi function when not needed.
3. Improve the operating environment: Ensure the camera is used in a well-ventilated area to help dissipate heat more effectively.Can I change the lens of Osmo 360 II?
Osmo 360 II features an all-new replaceable lens design. If the lens is accidentally damaged, the user can replace the outer lens using the Osmo 360 II Lens Replacement Kit*.* Osmo 360 II Lens Replacement Kit is sold separately.
How do I clean the lens area of Osmo 360 II?
1. Dirt on the lens can be cleaned with a lens cleaning cloth. For dust in the cracks at the edge of the lens, use a dust blower or cotton swab for cleaning.
2. To clean water stains, oil smudges, or fingerprints on the lens, apply a few drops of lens cleaning solution on lens tissues and use a circular motion to wipe away.Is Osmo 360 II waterproof?
Yes, Osmo 360 II can be used underwater at depths of 10 m without a case*. For diving, it is recommended to use the Osmo 360 Invisible Waterproof Case**, which increases the waterproof depth up to 50 m***.* Before use, please ensure the battery compartment cover and USB-C Port Cover are securely closed. It is not recommended to use the camera body only for long-term underwater shooting or in environments with high water impact pressure. Osmo 360 II has an IP68 waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids. The camera alone is waterproof to a depth of 10 m, but due to the convex fisheye lens design, underwater light refraction may cause image distortion and stitching errors. Therefore, it is not recommended to use the camera body only for underwater shooting.
** Osmo 360 Invisible Waterproof Case is sold separately. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
*** Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition.What precautions should be taken when using Osmo 360 II underwater without a case?
1. Before use, ensure the battery compartment cover and USB-C Port Cover are securely closed.
2. The camera is waterproof up to 10 m without a case. However, due to the 360° camera's convex fisheye lens design, underwater light refraction may cause image distortion and stitching errors. Therefore, shooting underwater without a waterproof case is not recommended.
3. Do not use the camera in extreme water conditions, unknown liquids, hot springs, or corrosive liquids.
4. After underwater use, rinse the camera with fresh water and let it air-dry completely before next use.* For diving, we recommend using the Osmo 360 Invisible Waterproof Case (sold separately) for underwater shooting up to 50 m. Data was collected in a controlled water pressure environment in a DJI laboratory and should be taken as reference only. Actual performance may vary due to the specific diving environment and product condition. When using the Osmo 360 Invisible Waterproof Case underwater, the safe stitching distance is 1 m.
What microSD cards does Osmo 360 II support?
Recommended Models:
Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 256GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 512GB U3 A2 V30 microSDXC
Kingston CANVAS Go! Plus 1TB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 64GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 128GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 256GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 512GB U3 A2 V30 microSDXC
Lexar Professional SILVER PLUS 1TB U3 A2 V30 microSDXCWhich Bluetooth headphones and headsets are compatible with Osmo 360 II?
Osmo 360 II supports the following Bluetooth headphones and headsets:
AirPods 3
AirPods 4
AirPods Pro 2
AirPods Pro 3
Sony WH-1000XM5
Bose QuietComfort Ultra II
HUAWEI FreeBuds 6
OnePlus Buds 4
OPPO Enco X3
RESO Pilot Pro
RESO Pilot Neo
Cardo EDGE
SENA 50S
Hengjiang C50 Heavy Bass Headset
VIMOTO V11X
VIMOTO V9S/X
VIMOTO V10S/X
VIMOTO V11S/X
AiRide G9+
LEXIN G2P
ASMAX F1 ProWhat should I do if dust or sand gets inside Osmo 360 II?
Osmo 360 II is dust-proof. However, if dust does get inside the device and cannot be cleaned, please contact DJI After-Sales for professional handling.