Support pour DJI Air 2S

Yes. Press and hold the live view on the DJI Fly app, and then you can control the gimbal to move left or right.

Follow mode and FPV mode.

No, it cannot.

The upward vision system is automatically turned on in N mode or C mode. (It is necessary to select the obstacle avoidance behavior in the DJI Fly App as Bypass or Brake).
The upward vision system is suitable to be used in an environment with sufficient light, and the obstacles encountered during flight should have a dense texture.

No, it doesn’t. The DJI Air 2S aircraft is only equipped with upward, downward, forward, and backward vision sensing systems, except for side sensing systems.

The downward vision sensing system consists of binocular vision sensors, a Time of Flight (ToF) sensor, and an auxiliary bottom light.

Yes. If you disable "Flight Assistance" in the DJI Fly app, the vision sensing systems (except for the downward vision sensing system) of the aircraft will be turned off.

Yes, the vision sensing system still works during Power Saving RTH.

After enabling "Flight Assistance" -> "Bypass", the aircraft will automatically change and plan a new flight path to bypass the obstacle if it detects an obstacle. If the obstacle cannot be bypassed, the aircraft will hover in place.
After enabling "Flight Assistance" -> "Brake", the aircraft will brake and hover in place if it detects an obstacle.
After disabling "Flight Assistance", all obstacle avoidance actions will not be triggered when detecting an obstacle, and the aircraft will respond to the user's control stick input. In this case, it is possible that an accident may occur.

There are three modes included by the FocusTrack: Spotlight, Follow (Parallel & Track), and Circle.

Yes, it does.

Yes, the DJI Air 2S aircraft supports pressing one button to trigger the Smart RTH function.

You can select "Auto" or "Manual" mode in the image transmission interface. After selecting "Manual" mode, you can set the channel manually.

No, it doesn't.

OcuSync 3.0 uses a brand-new image transmission solution. It is equipped with four antennas compared to OcuSync 2.0's two antennas, which brings full HD image transmission of up to 12 kilometers (measured in an interference-free and unobstructed environment, and in FCC standards), enhances the anti-interference capability of the image transmission system, and improves the reliability of the image transmission system in complex environments such as cities.

Yes, they can be used interchangeably.

Yes. For Android devices, they are charged once connected to the DJI Air 2S remote controller. However, for iOS devices, they can only be charged after the charging switch is turned on.

The DJI Air 2S remote controller only supports Type-C ports.

No, it doesn't.

No, it doesn't.

No, it doesn’t. The charging power of the DJI Air 2S remote controller is 10 W.

The remote controller antennas are built into the mobile phone holder. Please adjust the antenna direction according to the position of the aircraft. For more information about antenna directions, please refer to the User Manual.
In addition, do not wear any wearable devices with information transmission function during flight, and ensure that the mobile phone wireless network and Bluetooth are turned off to avoid interference with the aircraft's image transmission signal.

No, you cannot.

Connect the intelligent flight battery to the charger or battery charging hub to charge the battery.
Connect the charger to the charging port of the remote controller with a USB 3.0 Type-C cable to charge the remote controller.

When using DJI Fly to update the DJI Air 2S aircraft firmware, the battery firmware will be updated at the same time. If you need to update the battery firmware separately, the app will pop up the option "Battery firmware needs to be updated", and then you can click "Upgrade" to upgrade the battery. Or, when connecting to the assistant software, it will prompt that the battery firmware version is different, and then you can click "Confirm" to upgrade the battery firmware.

Press the power button once to check the battery level.
Press and hold the power button to power on or off the aircraft.
Press and hold the power button for over 4 seconds to link the aircraft to the remote controller.

After mounting the propeller guards onto the DJI Air 2S aircraft:
As the weight of the aircraft increases, the flight power will be affected, and thus the battery life will decrease. (Additionally, when measuring the battery life, environmental factors such as wind resistance speed should be taken into account, so absolutely accurate flight parameters can't be determined.)
To ensure flight safety, the horizontal speed is limited to a maximum of 12.9 m/s, and the descending speed is limited to 2 m/s.
It will not affect the max service ceiling above sea level, obstacle avoidance system, intelligent flight modes, and height limits and distance limits.

We recommend that the propellers be removed from the aircraft and stored safely during transportation, so that they are not damaged or will not cause damage to the aircraft.

Push both sticks to the inner or outer bottom corners to stop the propellers. (This operation is valid by default when the aircraft detects a severe error during flight: for example, if the app indicates that the aircraft has been hit, the aircraft ascends or descends uncontrollably and quickly, the aircraft rolls over continuously and uncontrollably, or if a motor has stalled.)
You can change this setting in the DJI Fly app.

Yes. Hold the gimbal and camera module, slowly remove the camera front panel, and then replace the ND filter. Note that the ND filter has to be properly fitted to avoid a detachment during flight.

Sorry, DJI has not yet released this accessory.

Yes, it does.

The DJI Air 2S aircraft can be used with most of the accessories of the Mavic Air 2 aircraft except for the gimbal protector and ND filters.

We recommend that you use a UHS-I U3 microSD card:
SanDisk Extreme PRO 64GB V30 A2 microSDXC
SanDisk High Endurance 64GB V30 microSDXC
SanDisk Extreme 64GB V30 A2 microSDXC
SanDisk Extreme 128GB V30 A2 microSDXC
SanDisk Extreme 256GB A2 microSDXC
Lexar 667x 64GB V30 A2 microSDXC
Lexar High-Endurance 64GB V30 microSDXC
Samsung EVO 64GB microSDXC
Samsung EVO Plus 64GB microSDXC
Samsung EVO Plus 256GB microSDXC
Kingston V30 128GB V30 microSDXC
Netac 256GB A1 microSDXC

No, it doesn't.

No, the DJI Air 2S is neither compatible with the DJI Goggles RE nor the DJI Goggles V2.

No, the DJI Air 2S camera is equipped with a normal lens, not a UV lens.

Please mount the propellers with orange marks on the motors with orange marks, and mount the propellers without orange marks on the motors without orange marks.
Before the aircraft takes off, the DJI Fly app will prompt you to install the propellers properly.

No, the DJI Fly app does not currently support live streaming for the DJI Air 2S aircraft.

You can use FocusTrack in C, N, and S modes.

The DJI Air 2S aircraft supports the terrain follow function, but it only supports following above terrains with a small tilt angle. Additionally, it will rise and fall automatically following the terrain.
The DJI Air 2S terrain follow function is suitable when the chages in elevation is less than 10°.

ActiveTrack 4.0 adopts a more advanced path planning algorithm. When an obstacle is detected, the DJI Air 2S aircraft can plan avoidance actions in advance and avoid obstacles with a smoother path, and thus has smoother and better shooting quality.

1. SmartPhoto
2. MasterShots
3. APAS 4.0
4. QuickShots: Dronie, Rocket, Helix, Asteroid, Boomerang, and Circle
5. FocusTrack: Spotlight, ActiveTrack, and POI
6. Smart RTH: Power Saving RTH
7. Hyperlapse: Free, Circle, Courselock, and Waypoint

APAS 4.0 further optimizes the environment map modeling algorithm, and increases the sensing area above, making the aircraft's obstacle avoidance and bypass actions more reliable and smooth.

No, it doesn't.

No, it doesn't.

The DJI Air 2S aircraft should be used with the DJI Fly app. The redesigned app brings you a simple and intuitive operation experience, making flying easier. Additionally, you can find many flight tutorials in the DJI Fly app, allowing you to master flight skills more safely.
To download the DJI Fly app, you can go to an app store or scan the QR code on DJI's official website.

Sorry, the DJI Air 2S does not support use with the DJI Pilot app.

The DJI Air 2S aircraft has D-Log mode, but does not support D-Cinelike mode.

No. The DJI Air 2S aircraft does not support GS Pro. GS Pro is mostly used for industrial surveying and mapping.
The DJI Air 2S as a consumer model does not support this type of function, so it is not compatible with GS Pro.

No, it doesn't.

DJI Air 2S panoramic composite film has an HDR effect, while the original film has no HDR effect.

“MasterShots” is a new function specifically designed for flight shooting and post-editing. After this function is enabled, the aircraft can automatically match the appropriate flight path (Portrait, Proximity, or Landscape) and shoot videos with multiple classic shooting modes according to the type and distance of the shooting target. When shooting is completed, the original video will be edited automatically. With the help of the built-in templates in “MasterShots”, even an aerial photography beginner can make fantastic video clips.

Yes, it does.

Yes, it can.

After selecting a subject, you can set the length, width, and height of the flight area in the DJI Fly app, and then setting the range as "Small", "Medium", or "Large".

When the distance between the subject and the aircraft exceeds 100 m, it will be considered as a long-range view. When the distance is less than 100 m, it will be considered as a close-range view.

The flight path is automatically planned and fixed, and users cannot choose by themselves.

Yes, it does.

Yes, they are the same.

Yes. The product quality certificate of the DJI Air 2S aircraft is located on the external surface of the package, together with the certification information.