Support for DJI Avata

No.

DJI Motion Controller and DJI FPV Remote Controller 2.

The drone can only be used with the DJI Goggles 2 and DJI FPV Goggles V2.

No.

Yes. Its internal storage is 20 GB.

No. But the drone can automatically brake and hover in place in Normal/Sport mode when the downward vision systems are enabled.

Image Size: 4000 × 3000
Format: JPEG

MP4.

Yes. Three options of distortion correction can be set: Standard, Wide-Angle, and Super Wide Angle.

No. But video correction is available after a video is recorded.

It supports Standard and D-Cinelike color profiles.

Yes. Three options can be set: Off, RockSteady, and HorizonSteady.

It has a 1/1.7” CMOS sensor with the effective pixels of 48 MP.

Yes. The ISO, shutter speed, EV, and white balance can be manually configured.

FCC: < 33 dBm
CE: < 14 dBm
SRRC: < 30 dBm

No. But after you connect the drone to the computer via the USB-C port, the information stored in the microSD card can be read, and the firmware can be updated using DJI Assistant 2.

If the drone is used frequently within a short time and there is no signal interference, it takes about 20 seconds to search for satellites; and if it is not used frequently, it may take longer.

10 km (FCC)
2 km (CE)
6 km (SRRC)

No.

Smart Return to Home (RTH).

The drone can hover in place automatically in Normal/Sport mode.

Under the current circumstance, if one single drone is being operated, please be aware of the items below:
1) Please do not fly in areas with interferences such as Wi-Fi signals.
2) Please do not fly the drone too far away or at a very low altitude.
3) Please make sure that the drone should fly in safe and unrestricted areas. For detailed regulations, please consult your local laws and regulations.
4) Please ensure the usage of the goggles should be in accordance with the local laws and regulations.
5) Before each flight, it is recommended to connect it to the mobile device to update the firmware and GEO zones, and register your flight activities according to the local laws and regulations.

First, you should learn about the local radio frequency laws and regulations before you go.
Second, connect the drone to DJI Fly after you arrive at the area so that the app can automatically tune the system settings.

1) Before takeoff, please ensure the propellers have been mounted properly, the sensors have been calibrated successfully, and the batteries have been fully charged. Also, please ensure there are no obstacles around, such as trees, buildings, or pedestrians.
2) Before landing, please choose an area with a flat surface away from water, and ensure no obstacles are nearby. It is recommended to use the aircraft in Normal mode for landing.

1. Power on the drone, goggles, and remote control device.
2. Press the link button on the goggles, and it beeps.
3. Press and hold the power button on the drone until its battery level LEDs blink in sequence.
4. After successful linking, the drone’s battery level LEDs turn solid, showing the actual battery level. Then, the goggles stop beeping, and image transmission can be displayed normally.
5. Press and hold the power button on the drone until the battery level LEDs blink in sequence.
6. Press and hold the power button on the remote control device until it starts to beep continually, and the battery level LEDs blink in sequence.
7. After successful linking, the battery level LEDs of both the drone and remote control device turn solid and display the battery level. Then, the remote control device stops beeping.
* For detailed operations, please refer to the user manual or watch the tutorial video on the DJI's official website.

A brand new DJI Avata must be activated through the DJI Fly app.
First, please power on the drone, goggles, and remote control device, and ensure all the devices are linked.
Then, connect the USB-C port of the goggles to the mobile device, run the app, and activate the device by following the on-screen prompts. Note that an internet connection is required for activation.
* For detailed operations, please refer to the user manual or watch the tutorial video on the DJI's official website.

[Method 1] Use DJI Fly to update the firmware.
1. Power on the drone, goggles, and remote control device, and ensure all these devices are linked.
2. Connect the USB-C port of the goggles to the mobile device, run the app, and update the firmware by following the on-screen prompts. Note that an internet connection is required for firmware update.
[Method 2] Use DJI Assistant 2 (Consumer Drone Series) to update the firmware.
1. Power on the device. Connect the USB-C port of the device to the computer using the USB-C cable.
2. Launch DJI Assistant 2 (Consumer Drones Series), and log in to your DJI account.
3. Click the icon of the device, and click the “Firmware Update” option on the left.
4. Select and confirm the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.
* For detailed operations, please refer to the user manual or watch the tutorial video on the DJI's official website.

Yes. Go to the menu of the goggles, and then go to Settings > Safety > Find My Drone.
It helps find the location of the drone on the ground by using the cached video in the goggles. If the drone still has power, turn on ESC beeping, and the beeping sound will lead you to locate the drone.

The goggles provide the first-person view, letting you “fly” in the pilot seat.
Without the goggles, you can only have the experience of operating a drone, instead of enjoying stunning visual effects.

The DJI Avata drone is equipped with a single axis (tilt axis) gimbal stabilizer.

Mechanical Range: -90° to 70°
Controllable Rotating Range: -80° to 65°

No. But the function of Head Tracking can help realize the effect.

No.

It is ±0.01° (in Normal mode).

The gimbal mode will be automatically switched according to the flight mode:
When the flight mode is Normal/Sport mode:
The gimbal is in altitude stabilization mode. The tilt angle of the gimbal remains stable relative to the horizontal plane.
When the flight mode is Manual mode:
The gimbal is in lock mode. The tilt angle of the gimbal remains stable relative to the drone body.

Enter the menu of the goggles: Settings > Control > Gimbal Calibration.

1. Check if the gimbal bracket is stuck, and if the rubber damper is broken.
2. Check if the propeller is misshapen or broken.
3. Check if the motor is vibrating abnormally after being started.
If this issue is not fixed after calibration, or if the gimbal is malfunctioning due to external force, it is recommended to send back the product for inspection.

No.

Yes. There are three ND filters: ND8, ND16, and ND32.

It is 1.6 × 1.6 um (Quad Bayer).

Max Photo Size: 4000 × 3000
If being used with the DJI Goggles 2:
4K@50/60fps
2.7K@50/60/100fps
1080p@50/60/100fps
If being used with the DJI FPV Goggles V2:
4K@50/60fps
2.7K@50/60/100/120fps
1080p@50/60/100/120fps

Because different goggles support different frame rates, the video resolution will change accordingly if the drone is used with different goggles.

100 to 6400 (auto)
100 to 25600 (manual)

JPEG.

150 Mbps.

exFAT (recommended)
FAT32

No.

No.

No. The constant aperture of the lens is f/2.8.

There is no night shooting mode for DJI Avata.
It is recommended to shoot when the lighting conditions are good.

1/8000 to 1/50 s (photo)
1/8000 to 1/50 s (video)

No.

DJI Avata supports distortion correction, including three correction modes: Standard, Wide-Angle, and Super Wide Angle.
If videos are still distorted, please provide the original files and contact DJI Support.

Progressive scanning.

Electronic rolling shutter.

5000 m.

The max horizontal speed (tested near sea level and without wind):
8 m/s (in Normal mode)
14 m/s (in Sport mode)
27 m/s (in Manual mode)

No.

Around 18 mins (tested in a windless environment).

Around 18 mins.

11.6 km (tested in a windless environment).

10.7 m/s (Level-5 wind resistance).

You need to go to the settings in the goggles first:
Enter the menu of the goggles, and then go to Settings > Safety > Advanced Safety Settings > Emergency Propeller Stop.
Then, try pushing the control sticks on the remote controller as follows:
Push both control sticks on the DJI FPV Remote Controller 2 to the bottom inner or outer corner.
Note: Stop the motors mid-flight in an emergency only, such as when the motors are stalled, the DJI Fly app prompts that the aircraft is malfunctioning, or a collision occurs.

No. The drone with the propeller guard will become more sensitive to wind.

If being used with the DJI FPV Goggles V2:
810p/120fps: The transmission latency is lower than 28 ms.
810p/60fps: The transmission latency is lower than 40 ms.
If being used with the DJI Goggles 2:
1080p/100fps: The transmission latency is lower than 30 ms.
1080p/60fps: The transmission latency is lower than 40 ms.

Yes. The transmission channel will be switched automatically.

Yes. You can set the channel mode to auto or manual under Transmission settings.

Max. Flight Altitude: 500 m
Transmission Range: 10 km (FCC) / 2 km (CE) / 6 km (SRRC)

-10 to 40 ℃.

Capacity: 2420 mAh
Energy: 35.71 Wh@0.5C
Standard voltage: 14.76 V

It supports the USB Power Delivery protocol.

74 W.

17 V.

Li-ion 4S.

No.

5° to 40° C (41° to 104° F).

The battery can be charged by the charging hub or the adapter connected to a USB charger.

DJI Avata battery charging hub, used with a charger, can charge up to four DJI Avata intelligent flight batteries at the same time.

162 g.

Yes.

1. Do not charge the battery immediately after flight as it may be too hot. Wait until it cools down to the room temperature.
2. The temperature range for charging is from 5 to 40°C, and the ideal range is from 22 to 28 °C as it will significantly prolong the battery life.
3. Store the battery in a cool place.
4. Before storage, charge the battery to 50-60%, and fully charge it at least once every three months in case that its battery cell will be malfunctioning due to over-discharge.

The battery charging hub will first charge all batteries to 94% according to their remaining battery levels (from high to low), and then charge them all to 100% in sequence.

Turns solid yellow: The battery is not in place.
Pulses green: The battery is being charged.
Turns solid green: All batteries are fully charged.
Blinks yellow: The temperature of the battery is too high or too low (no further operation needed).
Turns solid red: The overcurrent, abnormal voltage or other battery error occurs (unplug and plug the batteries or charger to resume charging).

[Method 1]
If the battery is mounted to the drone, the drone will detect the battery’s firmware version after being powered on. If the firmware version is earlier, a warning will prompt in the goggles, and then tap to update the firmware.
[Method 2]
Install the battery to the drone, and update the selected firmware using DJI Assistant 2.

Charging Time (for one single battery):
When charging it to 94%: It takes approx. 37 mins.
When charging it to 100%: It takes approx. 48 mins.
(measured when a DJI 65W Portable Charger is used)

Yes.

No. The activation operation is not required, and generally this phenomenon will not occur.

It has one compass.

It supports three systems, including GPS, Galileo, and BeiDou.

Yes. You can set the Signal Lost action as Return to Home, Land, or Hover.

No. It may cause the update failure.

It may be caused by the hardware (which cannot be identified) or network issue.

Yes.

Yes.

No.

No. It does not have the obstacle avoidance system.

It is not recommended to fly the DJI Avata drone above water surfaces.

155°.

It consists of an infrared sensing system and a downward vision system.

Infrared Sensor Measurement Range: 10 m

Precision Measurement Range: 0.5 to 10 m
Effective Measurement Range: 0.5 to 20 m

Yes.

Yes.

No.

No.

No.

No.

Yes.

No.

No.

Yes.

29.5 × 15 × 48 cm.

No.

Yes.

DJI Motion Controller has the movement control function.
For more details, please refer to the user manual or the tutorial video on the DJI's official website.

The DJI Motion Controller adopts the OcuSync3.0 image transmission technology with a max flight distance of up to 10 km.

167 g.

It runs at most 5 hours.

It ranges from -10 to 40℃.

Currently, it only supports the DJI Avata and DJI FPV drones.

By changing the attitude of the motion controller, you can control the movement of the spot in the goggles interface accordingly, and the DJI Avata drone will fly towards to the spot after pressing the accelerator.

No, M mode is not currently supported.

1. Link the drone to the goggles first.
2. The linking methods of the DJI Motion Controller are the same as those of the DJI FPV Remote Controller 2:
Press and hold the power button on the drone, and then press and hold the power button on the motion controller.

Connect the goggles to the mobile device, and use the DJI Fly app to update the firmware;
or connect the motion controller to the computer to update the specific firmware using DJI Assistant 2.

After all devices are linked successfully, connect the goggles to the mobile device, run DJI Fly, and then follow the on-screen prompts to activate the motion controller.

No.

The drone does not support the dual remote controller mode.

When the GPS signal is good and the vision systems are working normally, the DJI Avata/FPV drone can fly up to 500 meters vertically, and there is no restriction on the max horizontal distance.

Dimensions with Packaging: 95 × 55 × 176 mm Weight: 0.25 kg

No.