16GB: SanDisk Extreme
32GB: Samsung Pro Endurance, Samsung Evo Plus, SanDisk Industrial, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, SanDisk Extreme Pro V30 A1, SanDisk Extreme Pro V30 A2, Lexar 633x, Lexar 667x 64GB: Samsung Pro Endurance, Samsung Evo Plus, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, Lexar 633x, Lexar 667x, Lexar 1000x, Lexar High Endurance, Toshiba EXCERIA M303 V30 A1, Netac Pro V30 A1
128GB: Samsung Pro Plus, Samsung Evo Plus, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, SanDisk Extreme Plus V30 A1, SanDisk Extreme Plus V30 A2, Lexar 633x, Lexar 667x, Lexar 1000x, Lexar High Endurance, Toshiba EXCERIA M303 V30 A1, Netac Pro V30 A1
256GB: SanDisk Extreme V30 A1, SanDisk Extreme V30 A2
N Mode: 25°; up to 40° when flying upwind.
Gimbal and Camera
4K 24/25/30 fps
2.7K 24/25/30 fps
1080p 24/25/30/48/50/60 fps
In the video recording view of the DJI Fly app, tap the zoom icon, touch the screen with two fingers, or use the dial while pressing the Fn button on the remote controller to zoom in.
Video: The DJI Mini 2 supports downloading videos at up to 4K. Whether the downloaded video can be played depends on the hardware of the mobile device.
a. Turn on the aircraft. As the aircraft status indicator automatically begins flashing yellow, press and hold the indicator for two seconds (ensure that the aircraft has been updated to the latest firmware; if the firmware version is 188.8.131.52, press the indicator button twice to switch the light) to turn the light blue, and then to pulsing lights.
b. Enable Wi-Fi and Bluetooth on the mobile device, launch the DJI Fly app, and there will be a prompt to connect to the aircraft.
c. Tap Connect. After a successful connection, you can access the aircraft album and download files at 20 MB/s. Note that when you connect the mobile device with the aircraft for the first time, you need to press the indicator button once to confirm connection.
When the aircraft is connected to the mobile device via the remote controller, enable Wi-Fi and Bluetooth on the mobile device to connect it with the aircraft. After you enter Playback in the DJI Fly app, tap the QuickTransfer icon in the upper righthand corner, and then you can download photos and videos from the aircraft to your smartphone.
S Mode: 16 m/s.
N Mode: 10 m/s.
C Mode: 6 m/s.
b. The flight height and distance are set in the flight settings in DJI Fly.
c. When taking off in an environment with poor GPS signals (where the number of satellites searched does not reach the minimum requirement for the aircraft to hover), the flight altitude will be restricted.
d. If the pilot does not register the aircraft in China with their real name, the flight altitude will be limited to 30 meters, and the flight distance will be limited to 50 meters.
e. When the aircraft is flying in a restricted flight zone, there will be flight restrictions.
For more information, please contact DJI Support.
Use the included screwdriver to change the propellers. Please follow the instructions provided. Remove the two blades and screws on the same arm, and replace with the propellers in the same package with new screws. Attach the propellers with marks to the arms with marks, and the unmarked propellers to unmarked arms. Ensure that the propellers and arms are installed securely before each flight.
DJI Mini 2 supports QC and USB PD fast-charging protocols, and supports up to 29 W of input power.
Method 1: Connect the DJI Mini 2 aircraft to the mobile device, enter the flight interface in DJI Fly, and tap "Pair to Aircraft (Link)" at the bottom of the interface to enter the linking state;
Method 2: Press and hold the "Customizable Button" on the upper left corner, the "Photo/Video Toggle" on the upper right corner, and the "Shutter/Record Button" on the top panel of remote controller for two seconds simultaneously. When the remote controller is beeping, and the battery level LEDs on the remote controller are blinking sequentially, you can start linking.
When the DJI Mini 2 aircraft is powered on, press and hold the aircraft power button for 4 seconds. When the aircraft is beeping, and the battery level LEDs are blinking sequentially, the aircraft is linking.
For Android users, the DJI Mini 2 charges the mobile device once it is connected by default, which cannot be disabled in DJI Fly.
It takes 3.5 hours to fully charge the remote controller.
When the remote controller does not act as a charger, its battery life is 6 hours.
When it acts as a charger, its battery life is 4 hours.
b. Powering off DJI Mini 2 or the remote controller during an update. If this happens, restart DJI Mini 2 and the remote controller, and begin the update again.
c. The internet was disconnected during the firmware download.
d. If the update failure persists or the remote controller does not link with the aircraft, there may be firmware inconsistencies between the devices. In this case, use DJI Assistant 2 (Consumer Drones Series) on your computer to update the aircraft and the remote controller to the latest versions separately.
During the update, the aircraft will restart multiple times and automatically shut down after the update has been completed.