The compact and portable DJI Power 500 has a battery capacity of 512 Wh to provide a max output power of 1000 W. [1] It is capable of powering high-wattage appliances such as electric kettles (900 W) and can charge a computer and smartphone simultaneously, providing stable power until battery runs out. [8]
DJI Power 500 provides stable power supply to common household devices. Click the button below to choose your common scenarios and appliances, and find the product portfolio best suited for you.
With the aid of separately-sold charging cables, you can fast charge select DJI drone batteries with the DJI Power SDC super-fast charge function, [4] and be up in the air within approximately 30 mins. With three drone batteries and a DJI portable power station, you can enjoy an entire day of worry-free flight and creation.
Mavic 3 Series Intelligent Flight Battery [9] Approx.
DJI Air 3 Intelligent Flight Battery Approx.
32 mins
30 mins
Battery level from 10% to 95%
Battery level from 10% to 95%
Inspire 3 TB51 Intelligent Flight Battery Approx.
Matrice 30 TB30 Intelligent Flight Battery Approx.
28 mins
32 mins
Battery level from 10% to 95%
Battery level from 10% to 95%
* The above charging data was measured in a controlled test environment and is for reference only.
DJI Power 500 can be recharged in four ways: grid power, USB-C, solar power, and car power. Whether indoors or on the road, you can flexibly choose the recharging method that works for you.
Safety comes first at all times. From the body structure and cell chemistry to the system software, DJI Power 500 features a comprehensive safety design. It has passed 26 product test certifications from the Swiss third-party testing authority SGS, ensuring worry-free electrical usage.
If an electrical device is connected to a powered-on DJI Power 500 (via AC output port) and both are receiving grid power, DJI Power 500 defaults to UPS (Uninterruptible Power Supply) mode. In cases of sudden power outage, DJI Power 500 can start powering the connected device (or devices) within 0.02 seconds, [13] ensuring continued operation.
The noise level of DJI Power 500 is as low as 25 dB [14] during recharging, lower than most household refrigerators, so there is no noise disturbance, even in quiet environments. It is also quieter than most electric fans and other everyday appliances.
Dual 100W USB-C two-way ports support power input and output, [2] and both ways support the PD 3.0 fast charging protocol, enabling efficient output and input. The two ports can be used simultaneously to recharge DJI Power 500 at a maximum of 200 W, or provide power supply to devices like cameras, phones, and laptops at up to 200 W. [2]
DJI Power 500 has dual two-way USB-C ports, dual AC output ports, dual USB-A ports, and one SDC Lite port. It is highly versatile to make power usage in various scenarios more convenient. It can connect to different types of solar panels, power cables, and adapter cables, meeting the needs of a variety of power supply and recharging options.
* All of the aforementioned accessories are sold separately. All aforementioned charging time data was measured in a controlled test environment and is for reference only. Actual user experience may vary.
** Certain accessories are currently out of stock. Stay tuned to DJI updates on availability.
*** Actual appearance of certain accessories may vary.
* The appearance of products sold in different countries and regions may vary. Refer to the actual item.
1. Available when the product's battery level is above 20%.
2. A single USB-C port supports a max output power of 100 W. During power output, both the device being charged and the cable must support the PD 3.0 protocol. During power input (recharging the power station), both the charger and the cable must support the PD 3.0 protocol.
3. At a room temperature of 25° C (77° F), charging two smartphones with battery capacities of approx. 17 Wh each. The minimum time to charge from 0% to 50% is 15 minutes using the PD fast charging protocol and at a charging power of approx. 34 W. Charging time may vary due to factors like temperature, device model, battery capacity, and device compatibility. Refer to the actual usage. Data measured in a DJI laboratory.
4. Requires certain accessories, which are sold separately.
5. Measured under 25° C (77° F) laboratory conditions, being recharged in the 270W Standard Recharge Mode, and at an output power of 500 W.
6. Tested under laboratory conditions at 25° C (77° F) and should be used for reference only.
7. DJI Power 500 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after registration. Consult customer service on DJI Store for more details.
8. When charging multiple devices simultaneously, if the total output power does not exceed 1100 W, Power 500 can stably power the devices until the battery runs out. If the total output power exceeds 1100 W, Power 500 will shut off the AC output after 30 seconds.
9. Supports DJI Mavic 3 Pro Series, Mavic 3 Classic, Mavic 3 Series, and Mavic 3 Enterprise Series.
10. DJI Power 500 can connect to one DJI Power Solar Panel Adapter Module (MPPT), which can then connect with up to three solar panels. DJI Power 500 can also connect to one solar panel through the DJI Power Car Power Outlet to SDC Power Cable.
11. Requires the DJI Power Solar Panel Adapter Module (MPPT) and solar panels, which are sold separately. The minimum time to fully recharge was measured under 25° C (77° F) laboratory conditions and is for reference only. Actual recharging time is subject to factors like the angle of sunlight and light intensity. Actual user experience may vary.
12. Based on the correct usage of the product, DJI Power 500 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle on a daily basis. This data is for reference only. Actual user experience may vary.
13. Data measured in a DJI laboratory.
14. Measured 100 cm away from DJI Power 500 while it was being recharged in the 270W Standard Recharge Mode, and is for reference only.
15. Measured with the battery temperature at approx. 25° C (77° F) and at approx. 50% battery level. Duration may vary due to differences in battery temperature and battery level. Refer to the actual usage. It is recommended to use max power output when the battery is at a moderate temperature and a relatively higher battery level. Data measured in a DJI laboratory.
16. Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.