Support for Phantom 4 Pro V2.0


FAQ

The color of the DJI logo on the top of the Phantom 4 Pro is silver while that of the Phantom 4 Pro V2.0 is gold.
Did this help answer your questions?Yes/No
No. The Phantom 4 Pro V2.0 uses FOC ESC drivers, which reduces the noise of the drone.
Did this help answer your questions?Yes/No
9455S quick-release propellers.
Did this help answer your questions?Yes/No
This propeller model is designed to enhance aerodynamic efficiency and noise reduction.
Did this help answer your questions?Yes/No
Yes.
Did this help answer your questions?Yes/No
Yes.
Did this help answer your questions?Yes/No
The Phantom 4 Pro V2.0’s camera is the same as the Phantom 4 Pro’s. It is equipped with a 1-inch 20-megapixel sensor,supporting shooting 4096x2160 videos at 60 fps (H.264) or 30 fps (H.265) with a maximum bitrate of 100 Mbps. It also has a manually adjustable aperture from F2.8 to F11. Auto, M, A (aperture priority), and S (shutter priority) modes are available. For more details, please refer to the Specifications on the product page on DJI’s official website.
Did this help answer your questions?Yes/No
Yes.
Did this help answer your questions?Yes/No
In S-mode, the aircraft can tilt up to 42 degrees, while the gimbal can move at most 45 degrees upward and 120 degrees downward. Hence, the gimbal cannot point forward horizontally when the aircraft is flying quickly in S-mode. To solve such issue, move the pitch of the gimbal downward by at least 12 degrees when flying in S-mode.
Did this help answer your questions?Yes/No
100 Mbps.
Did this help answer your questions?Yes/No
Their remote controllers are different.
The Phantom 4 Pro+ V2.0’s remote controller includes a 5.5-inch, 1080p, 1000 nit built-in display. Its screen can be seen clearly in direct sunlight. It can be used in low-temperature environments, and a mobile device is no longer required. The remote controller also features an HDMI port, a micro-SD card slot, a built-in microphone, and a speaker, which allows for live streaming and video editing anytime, anywhere.
Did this help answer your questions?Yes/No
No, as their image transmission technologies are different.
Did this help answer your questions?Yes/No
A. The color of the DJI logo on the top of the Phantom 4 Pro’s remote controller is silver, while that of the Phantom 4 Pro V2.0 is gold.
B. Heat dissipation holes are added to the bottom of the Phantom 4 Pro V2.0’s remote controller.
Did this help answer your questions?Yes/No
The Phantom 4 Pro V2.0’s remote controller uses a new OcuSync transmission technology, which allows a wireless connection to DJI Goggles RE.
Did this help answer your questions?Yes/No
No.
Did this help answer your questions?Yes/No
Users cannot switch between FCC and CE manually. The remote controller will enable FCC or CE mode based on your location in accordance with local laws and regulations.
Did this help answer your questions?Yes/No
A.Using DJI GO 4: Tap “Link Remote Controller” under Remote Controller Settings. The remote controller’s Status LED will blink blue, and you will hear a “DDD…” alarm. Then press the drone’s Link Button with a proper tool to link your remote controller to the Phantom 4 Pro V2.0.
B.Using a Button Combination: Press the C1, C2 and video recording buttons at the same time. After the remote controller’s Status LED blinks blue, and you hear a “DDD…” alarm, press the drone’s Link Button with a proper tool to link your remote controller to the Phantom 4 Pro V2.0.
Did this help answer your questions?Yes/No
The Phantom 4 Pro V2.0 is powered by a new OcuSync transmission system, and it supports 2.4 GHz and 5.8 GHz frequency bands.
Did this help answer your questions?Yes/No
FCC: 7 km, CE: 4 km (Unobstructed, free of interference).
Actual transmission distance varies depending environmental conditions and operation.(2.4GHz)
Did this help answer your questions?Yes/No
Smooth Mode: 720p 60 fps
Normal Mode: 720p 30 fps
HD Mode: 1080p 30 fps
It can be set under the Image Transmission Settings in DJI GO 4.
Did this help answer your questions?Yes/No
The remote controller’s signal will be affected if its antennas are not positioned properly. Try to adjust the antennas.
Did this help answer your questions?Yes/No
5870 mAh, 15.2 V, 89.8 Wh.
Did this help answer your questions?Yes/No
Around 90 minutes.
Did this help answer your questions?Yes/No
Keep the Intelligent Flight Battery away from water or moisture. Battery level should fall between 45% and 65% when the Intelligent Flight Battery is to be stored for a long period. If the Intelligent Flight Battery is to be stored for more than three months, it should be fully charged and discharged once every three months to avoid over-discharging.
Did this help answer your questions?Yes/No
Yes, when the voltage of the battery cells is lower than 3.62 V, the display will turn yellow.
Did this help answer your questions?Yes/No
Battery capacity will decrease significantly when the Intelligent Flight Battery is used at low temperatures (below minus 10 degree Celsius). It is recommended to warm up the Intelligent Flight Battery to 20 degrees Celsius before a flight.
Did this help answer your questions?Yes/No
When the battery has been stored for a long period with over 65% charge, the auto-discharging function will be triggered. The Intelligent Flight Battery will discharge to 65% of its total power automatically while emitting moderate heat.
Did this help answer your questions?Yes/No
The Phantom 4 Pro V2.0’s firmware can be updated with both DJI GO 4 and DJI Assistant 2. But the update methods differ.
If updating with DJI GO 4, the mobile device and drone do not need to be connected to the USB OTG cable and micro USB cable anymore. Instead, the remote controller’s firmware and aircraft’s firmware can be updated in the app at the same time.
When updating with DJI Assistant 2, you can choose to update the remote controller’s firmware or aircraft’s firmware separately or update both of them at the same time.
Did this help answer your questions?Yes/No
The left and right infrared sensors will only function in Beginner Mode and Tripod Mode.
Did this help answer your questions?Yes/No
DJI GO 4 can run on both iOS and Android mobile devices. For more details, please see the Specifications on the product page on DJI’s official website.
Did this help answer your questions?Yes/No
0.2 meters to 7 meters.
Did this help answer your questions?Yes/No
Yes.
Did this help answer your questions?Yes/No

Tutorial Videos

Activating the Aircraft
Activating the Aircraft
How to Link the Aircraft to the Remote Controller
How to Link the Aircraft to the Remote Controller
Updating the Firmware with DJI GO 4
Updating the Firmware with DJI GO 4
How to Update the Firmware with a PC
How to Update the Firmware with a PC
How to Connect the DJI Goggles
How to Connect the DJI Goggles
Phantom 4 Series – Calibrating the IMU
Phantom 4 Series – Calibrating the IMU
How to Mount the Battery
How to Mount the Battery

Contact Us

CHINA

Mon - Sun 9:00AM - 12:30PM; 2:00PM - 9:00PM (GMT+8)

Hong Kong China

Mon - Sun 9:00AM - 12:30PM; 2:00PM - 9:00PM (GMT+8)

Macau China

Mon - Sun 9:00AM - 12:30PM; 2:00PM - 9:00PM (GMT+8)

Taiwan China

Mon - Sun 9:00AM - 12:30PM; 2:00PM - 9:00PM (GMT+8)

UNITED STATES & CANADA

Mon-Fri 7:00AM - 5:00PM (PST)

GERMANY

Mon-Fri 9:00AM - 3:00PM (GMT+1)

Netherlands

Mon-Fri 10:00AM - 7:00PM (GMT+1)

United Kingdom

Mon-Fri 9:00AM - 6:00PM (GMT+0)

Australia

Mon-Fri 9:00AM - 5:00PM (GMT+10)